$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

IoT 기능을 적용한 세탁 가전제품의 신뢰성 확보를 위한 시험항목 프레임워크 설계에 관한 연구
A Study on the Design of a Test Item Framework for Securing Reliability of Laundry Home Appliances Using IoT Functions 원문보기

정보처리학회논문지. KIPS transactions on software and data engineering. 소프트웨어 및 데이터 공학, v.11 no.2, 2022년, pp.67 - 80  

조경록 (안동대학교 컴퓨터공학과) ,  박우정 (LG전자 리빙어플라이언스 모듈러개발1팀) ,  이은서 (안동대학교 컴퓨터공학과)

초록
AI-Helper 아이콘AI-Helper

최근 들어 세탁 가전제품은 사물인터넷(IoT) 기능을 적용한 제품이 많이 출시되고 있으나 IoT 기능에 대한 품질평가 시험은 거의 없는 게 현실이다. 특히 기존의 시험체제에서는 IoT 기능을 적용한 세탁 가전제품에 대해 IoT 시험항목이 마련되어 있지 않기 때문에 제품을 제조하는 제조사의 경우에는 결함이 발생하더라도 원인을 쉽게 찾기가 어려우며, 시험기관의 경우에도 IoT와 관련한 시험항목 선정 및 방법의 부재로 올바른 성능시험 수행에 제약이 있다. 본 논문에서는 가전기기 분야의 제품 중 IoT 기능을 적용한 세탁 가전제품에 대해 성능시험 프로세스에서 제품 결함을 찾아내고 그 원인을 식별할 수 있도록 IoT 시험항목을 공용성과 가변성으로 구분한 시험항목 프레임워크를 설계하고, 이를 이용한 시험방법 및 관리방안을 제안한다. 제안하는 연구를 통해 제조사 및 시험기관은 IoT 기능을 적용한 세탁 제품의 올바른 성능시험이 가능하여, 제품의 완성도를 높이고 신뢰성을 확보할 수 있다.

Abstract AI-Helper 아이콘AI-Helper

Recently, many laundry home appliances have been released with Internet of Things (IoT) functions, but there are few quality evaluation tests for IoT functions. In particular, since IoT test items are not prepared for laundry home appliances applied with IoT functions, it is difficult to find the ca...

주제어

표/그림 (27)

참고문헌 (31)

  1. Korea Consumer Agency, "Drum washing machine quality test results report," KCA Report, Department of Test & Inspection, No.361, pp.1-19, 2020. 

  2. Korea Consumer Agency, "Drum washing machine quality test," KCA Report, Department of Test & Inspection, No.52, pp.1-13, 2006. 

  3. C. W. Park and S. D. Kim, "Practical methods for managing faults in IoT computing," Journal of Internet Computing and Servive(JICS), Vol.16, No.5, pp.75-86, 2015. 

  4. D. H. Lee, J. K. Oh, and J. J. Kim, "A study on S/W development process improvement based on CMMI's quantitative project management," The Journal of the Institute of Internet, Broadcasting and Communication (IIBC), Vol.18, No.3, pp.101-110, 2018. 

  5. Y. G. Choi, H. J. Jung, and J. C. Lee, "On the CMMI-based development of SE & PM integration process architecture," Journal of the Korea Academia-Industrial Cooperation Society, Vol.16, No.6, pp.4137-4146, 2015. 

  6. S. M. Cho and H. S. Han, "Development of a defect analysis and control system based on CMMI," Journal of Internet Computing and Servive, Vol.8, No.2, pp.15-22, 2007. 

  7. Korea Standards Association, "KS X ISO/IEC 25010: Systems and Software Engineering - System and Software Quality Requirements and Assessment(QuaRE) - System and Software Quality Models," Industrial Standards Council, 2017. 

  8. Korea Standards Association, "KS X ISO/IEC 25000: Information Technology - Software Engineering - Software Product Quality Requirements and Assessments(QuaRE) - SQuaRE Guide," Industrial Standards Council, 2018. 

  9. Korea Standards Association, "KS X ISO/IEC 9126-1: Software engineering - Product Quality - Part 1: Quality Model," Industrial Standards Council, 2017. 

  10. Korea Standards Association, "KS X ISO/IEC 14598-1: Information Technology - Software Product Assessment - Part 1: General Overview," Industrial Standards Council, 2008. 

  11. Korea Standards Association, "KS X ISO/IEC 14598-4: Information Technology - Software Product Evaluation - Part 4: Process for Acquirers," Industrial Standards Council, 2011. 

  12. Korea Standards Association, "KS X ISO/IEC 14598-6 : Information Technology - Software Product Assessment - Part 6: Assessment Module," Industrial Standards Council, 2008. 

  13. Korea Standards Association, "KS C IEC 60456: Performance measurement method of electric washing machines for home," Industrial Standards Council, 2015. 

  14. Korea Standards Association, "KS C 9608 : electric washing machines,"Industrial Standards Council, 2018. 

  15. Regulations for the Operation of Efficiency Management Equipment, "Electric Washing machine," Korea Energy Agency, 2017. 

  16. Korea Standards Association, "KS C IEC 60704-2-4: Noise measerment methods for home and similar electrical devices - Part 2-4: Individual requirements for electric washing machines and dehydrators," Industrial Standards Council, 2020. 

  17. Korea Agency for Technology and Standards, "KC 60335-1: Household and similar electrical appliance - Safety, Part 1: General requirements," Electrical equipment safety standards, 2015. 

  18. Korea Agency for Technology and Standards, "KC 60335-2-7: Safety of home and similar electrical devices-Individual requirements for washing machines," Electrical Equipment Safety Standards, 2015.. 

  19. E. Y. Cheon, Y. J. Seo, J. S. Lee, S. J. Kim, J. A. Kim, and H. S. Kim, "Software product line development and test process based on CVL," Journal of Korea Institute of Information Scientists and Engineers, Vol.42, No.1, pp.76-85, 2015. 

  20. S. H. Kim and J. A. Kim, "Consistency checking rules of variability between feature model and elements in software product lines," Journal of the Korean Society for Information Processing, Vol.3, No.1, pp.1-6, 2014. 

  21. WEBSTORMING, "What is the check list method?" [Internet], https://www.wowideas.co.kr/web/idea_cl.html, 2021. 

  22. M. Y. Joon, and R. S. Yul, "A study on software fault analysis and management method using defect tracking system," Journal of the Korean Society for Information Processing, Vol.15D, No.3, pp.321-326, 2008. 

  23. J. S. Young, "Risk based inspection thought deliverables check list forced," Sogang University Graduate School of Information and Communication Majoring in Information Processing, 2009. 

  24. D. J. Kim, K. H. Chung, and K. H. Choi, "A hierarchical checklist to automatically generate test scripts," Journal of the Korean Society for Information Processing, Vol.6, No.5, pp.245-256, 2017. 

  25. G. J. Song, "Statistical analysis of SPSS/AMOS required for preparation of revised and augmented paper," 21cbook, Gyeonggi-do, 2019. 

  26. H. J. No and Xinshengxyz, "Survey and statistics," Hakhyunsa, Gyeonggi-do, 2016. 

  27. SPSS Reliability Analysis [Internet], http://blog.naver.com/PostView.nhn?blogIdsub_om&logNo220742995520, 2016 

  28. Tool Excel Pull Statistics [Internet], https://statools.tistory.com/131, 2020. 

  29. J. S. Bae, et al., "Statistics using SPSS," KM, Seoul, 2016. 

  30. S. H. Lee and S. J. Lee, "A study on the importance of risk management for software development projects success," Thesis Collection of the 2015 Autumn Conference, Vol.22, No.2, pp.1031-1034, 2015. 

  31. K. Lim, "Manage the Software Defects using Opportunity Tree Framework," Korea Society of Computer Information, Vol.9, No.4, pp.1-4, 2004 

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로