최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기멤브레인 = Membrane Journal, v.32 no.6, 2022년, pp.456 - 464
이정인 (동국대학교 화공생물공학과) , 신민창 (동국대학교 화공생물공학과) , 장학룡 (동국대학교 화공생물공학과) , 황재연 (동국대학교 화공생물공학과) , 정창훈 ((주)하이젠에너지) , 박정훈 (동국대학교 화공생물공학과)
Hydrogen permeation performance was analyzed by manufacturing Pd and Pd-Cu membranes through electroless plating. As a support for the Pd and Pd-Cu membranes, α-Al2O3 ceramic hollow fiber were used. Pd-Cu membrane was manufactured through sequential electroless plating, and then annealing was...
P. M. Thoen, F. Roa, and J. D. Way, "High flux palladium-copper composite membranes for hydrogen separations", Desalination, 193, 224 (2006).
J. Xuan, M. K. H. Leung, D. Y. C. Leung, and M. Ni, "A review of biomass-derived fuel processors for fuel cell systems", Renew. Sust. Energ. Rev., 13, 1301 (2009).
F. Roa, M. J. Block, and J. D. Way, "The influence of alloy composition on the H 2 flux of composite Pd-Cu membranes", Desalination, 147, 411 (2002).
J. Y. Yang, C. Nishimura, and M. Komaki, "Effect of overlayer composition on hydrogen permeation of Pd-Cu alloy coated V-15Ni composite membrane", J. Membr. Sci., 282, 337 (2006).
M. D. Irfan Hatim, X. Tan, Z. Wu, and K. Li, "Pd/Al 2 O 3 composite hollow fibre membranes: Effect of substrate resistances on H 2 permeation properties", Chem. Eng. Sci., 66, 1150 (2011).
G. B. Sun, K. Hidajat, and S. Kawi, "Ultra thin Pd membrane on α-Al 2 O 3 hollow fiber by electroless plating: High permeance and selectivity", J. Membr. Sci., 284, 110 (2006).
W. Chen, X. Hu, R. Wang, and Yan Huang, "On the assembling of Pd/ceramic composite membranes for hydrogen separation", Sep. Purif. Technol., 72, 92 (2010).
R. J. Westerwaal, E. A. Bouman, W. G. Haijea, H. Schreuders, S. Dutta, M. Y. Wu, C. Boelsma, P. Ngene, S. Basak, and B. Dam, "The hydrogen permeability of Pd-Cu based thin film membranes in relation to their structure: A combinatorial approach", Int. J. Hydrog. Energy, 40, 3932 (2015).
G. J. Grashoff, C. E. Pilkington, and C. W. Corti, "The purification of hydrogen", Platin. Met. Rev., 27, 157 (1983).
S. E. Nam and K. H. Lee, "Hydrogen separation by Pd alloy composite membranes: introduction of diffusion barrier", J. Membr. Sci., 192, 177 (2001).
David J. Edlund and William A. Pledger, "Thermolysis of hydrogen sulfide in a metal-membrane reactor", J. Membr. Sci., 77, 255 (1993).
S. D. Axelrod and A. C. Makrides, "X-ray studies of hydrogen-silver-palladium electrodes", J. Phys. Chem., 68, 2154 (1964).
J. J. Conde, M. Marono, and J. M. SanchezHervas, "Pd-based membranes for hydrogen separation: Review of alloying elements and their influence on membrane properties", Sep. Purif. Rev., 46, 152 (2017).
M. S. Islam, M. M. Rahman, and S. Ilias, "Characterization of Pd-Cu membranes fabricated by surfactant induced electroless plating (SIEP) for hydrogen separation", Int. J. Hydrog. Energy, 37, 3477 (2012).
F. Roa, J. D. Way, R. L. McCormick, and S. N. Paglieri, "Preparation and characterization of Pd-Cu composite membranes for hydrogen separation", Chem. Eng. J., 93, 11 (2003).
A. Kulprathipanja, G. O. Alptekin, J. L. Falconer, and J. D. Way, "Pd and Pd-Cu membranes: Inhibition of H 2 permeation by H 2 S", J. Membr. Sci., 254, 49 (2005).
H. J. Lee and J. H. Park, "Effect of hydrophobic modification on carbon dioxide absorption using porous alumina (Al 2 O 3 ) hollow fiber membrane contactor", J. Membr. Sci., 518, 79 (2016).
S. H. Lee, B. J. Jeong, M. C. Shin, X. Zhuang, J. W. Jung, Y. J. Lee, D. Y. Won, and J. H. Park, "Development of high-durability ceramic hollow fiber and performance evaluation of contact membrane process according to pressure conditions", Membr. J., 30, 443 (2020).
J. I. Lee, M. C. Shin, Xuelong Zhuang, J. Y. Hwang, E. Y. Kim, C. H. Jeong, and J. H. Hoon, "Preparation of Pd/Al 2 O 3 , Pd/Ag/Al 2 O 3 Membranes and Evaluation of Hydrogen Permeation Performance", Membr. J., 32, 116 (2022).
Samhun Yun and S. Ted Oyama, "Correlations in palladium membranes for hydrogen separation: A review", J. Membr. Sci., 375, 28 (2011).
M. M. Rahman, M. S. Islam, M. A. Rahman, H. Tun, V. Deshmane, and S. Ilias, "Evaluation and characterization of Pd-Ag composite membrane fabricated by surfactant induced electroless plating (SIEP) for hydrogen separation", Sep. Sci. Technol., 54, 2084 (2019).
Andreas Goldbach, Lixiang Yuan, and Hengyong Xu, "Impact of the fcc/bcc phase transition on the homogeneity and behavior of PdCu membranes", Sep. Purif. Technol., 73, 65 (2010).
Kaihu Hou and Ronald Hughes, "Preparation of thin and highly stable Pd/Ag composite membranes and simulative analysis of transfer resistance for hydrogen separation", J. Membr. Sci., 214, 43 (2003).
H. Lu, L. Zhu, W. Wang, W. Yang, and J. Tong, "Pd and Pd-Ni alloy composite membranes fabricated by electroless plating method on capillary α-Al 2 O 3 substrates", Int. J. Hydrog. Energy, 40, 3548 (2015).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.