$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

원전 구조물-기기 상호작용이 기기 지진응답에 미치는 영향 연구
A Study on the Effects of Nuclear Power Plant Structure-Component Interaction in Component Seismic Responses 원문보기

한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.35 no.2, 2022년, pp.83 - 91  

곽신영 (한밭대학교 건설환경공학과) ,  임승현 (경북대학교 융복합시스템공학부) ,  정광섭 (한국원자력연구원 수출용신형연구로실증사업단) ,  정재욱 (한국원자력연구원 첨단구조지진안전연구부) ,  최인길 (한국원자력연구원 첨단구조지진안전연구부)

초록

원자력발전소 기기 내진설계 및 지진해석은 비연계모델을 대상으로 수행된다. 그러나 이러한 비연계해석은 실제 구조물-기기 간 상호작용 등의 실제 현상을 모사할 수 없기 때문에 연계해석에 비하여 정확하지 못한 결과를 발생시키게 된다는 한계를 가진다. 이러한 배경 아래 이 연구는 실제 원전 격납건물 구조물 및 관련 부계통을 대상으로 질량비와 고유진동수비를 고려하여 지진 연계해석과 비연계해석을 수행하고, 이를 바탕으로 부계통에서의 응답을 비교 분석하였다. 결과적으로 지진 연계해석 결과가 비연계해석 결과보다 대다수 작은 값을 주는 것을 확인하였다. 이러한 결과는 기존 연구인 단순한 연계모델에 대한 해석 결과와 유사하지만, 부계통 응답 차이는 훨씬 더 두드러지게 나타나는 것을 확인하였다. 또한, 이는 지진파의 입력 주파수의 영향보다는 부계통의 설치위치에 영향을 받는 것으로 확인되었다. 마지막으로 비연계 및 연계 지진해석의 차이가 부계통의 질량비가 크고, 고유진동수가 거의 일치하는 영역에서 발생하는 이유는 이 영역에서 주계통과 부계통 동적 상호작용이 크게 나타나기 때문인 것으로 보인다.

Abstract AI-Helper 아이콘AI-Helper

Seismic design and analysis of nuclear power plant components are performed based on an decoupled model. However, this decoupled analysis has a limitation in that it generates inaccurate results compared to the coupled analysis because it cannot simulate actual phenomena such as the interaction betw...

주제어

참고문헌 (24)

  1. Burdisso, R.A., Singh, M.P. (1987) Seismic Analysis of Multiply Supported Secondary Systems with Dynamic Interaction Effects, Earthq. Eng. & Struct. Dyn., 15(8), pp.1005~1022. 

  2. Chaudhuri, S.R., Gupta, V.K. (2002) Variability in Seismic Response of Secondary Systems due to Uncertain Soil Properties, Eng. Struct., 24(12), pp.1601~1613. 

  3. Chen, Y., Soong, T.T. (1988) Seismic Response of Secondary Systems, Eng. Struct., 10(4), pp.218~228. 

  4. Cho, S.G., Gupta, A. (2020) Generation of Floor Response Spectra Considering Coupling Effect of Primary and Secondary System, J. Earthq. Eng. Soc. Korea, 24(4), pp.179~187. 

  5. Gupta, A. (1996) Seismic Response of Secondary Systems, PhD Thesis Dissertation, North Carolina State University, Raleigh, NC, USA. 

  6. Gupta, A., Bose, M.K. (2017) Significance of Non-classical Damping in Seismic Qualification of Equipment and Piping, Nucl. Eng. & Des., 317, pp.90~99. 

  7. Gupta, A., Gupta, A.K. (1994) New Developments in Coupled Seismic Analysis of Equipment and Piping, In: Proceedings of the 13th International Conference on Structural Mechanics in Reactor Technology, Porto Alegre, Brazil. 

  8. Gupta, A., Gupta, A.K. (1998a) Missing Mass Effect in Coupled Analysis. I: Complex Modal Properties, J. Struct. Eng., 124(5), pp.490~495. 

  9. Gupta, A., Gupta, A.K. (1998b) Missing Mass Effect in Coupled Analysis. II: Residual Response, J. Struct. Eng., 124(5), pp.496~500. 

  10. Gupta, A.K. (1984) Seismic Response of Multiply Connected MDOF Primary and MDOF Secondary Systems, Nucl. Eng. & Des., 81(3), pp.385~394. 

  11. Jung, K., Kwag, S., Choi, I.K., Eem, S. (2020) Analysis of Seismic Response due to the Dynamic Coupling between a Primary Structure and Secondary System, J. Earthq. Eng. Soc. Korea, 24(2), pp.87~93. 

  12. KAERI (2019) Advanced Seismic Margin Assessment Methodology and Earthquake Response System for Beyond Design Basis Earthquakes, TRKO202000001912, Research Report, Korea Atomic Energy Research Institute. (URL: https://scienceon.kisti.re.kr/srch/selectPORSrchReport.do?cnTRKO202000001912) 

  13. Kim, J.H., Park, J.H., Choi, I.K. (2013) Evaluation of the Seismic Response Considering Site Effect and Nonlinear Structural Behavior, KAERI/TR-5369/2013, Korea Atomic Energy Research Institute. 

  14. Korea Electronic Power Corporation (1992) Seismic Analysis of Containment Building, ULCHIN Nuclear Power Plant Units 3&4, Report Number 9-310-C455-001. 

  15. Kwag, S., Eem, S., Park, J., Choi, I.K. (2020) Sampling-based Approach for Seismic Probabilistic Risk Assessment, J. Comput. Struct. Eng. Inst. Korea, 33(2), pp.129~136. 

  16. Kwag, S., Gupta, A. (2018) Computationally Efficient Fragility Assessment using Equivalent Elastic Limit State and Bayesian Updating, Comput. & Struct., 197, pp.1~11. 

  17. Papageorgiou, A.V., Gantes, C.J. (2010) Decoupling Criteria for Inelastic Irregular Primary/Secondary Structural Systems subject to Seismic Excitation, J. Eng. Mech., 136(10), pp.1234~1247. 

  18. Pardalopoulos, S.I., Pantazopoulou, S.J. (2015) Seismic Response of Nonstructural Components attached on Multistorey Buildings, Earthq. Eng. & Struct. Dyn., 44(1), pp.139~158. 

  19. Park, J., Choi, I.K. (2015) Revaluation of Inelastic Structural Response Factor for Seismic Fragility Evaluation of Equipment, J. Comput. Struct. Eng. Inst. Korea, 28(3), pp.241~248. 

  20. Singh, M.P., Suarez, L.E. (1987) Seismic Response Analysis of Structure-Equipment Systems with Non-Classical Damping Effects, Earthq. Eng. & Struct. Dyn., 15(7), pp.871~888. 

  21. Suarez, L.E., Singh, M.P. (1987) Seismic Response of SDF Equipment-structure System, J. Eng. Mech., 113(1), pp.16~30. 

  22. USNRC (2007a) P-CARES: Probabilistic Computer Analysis for Rapid Evaluation, NUREG/CR-6922, p.158. 

  23. USNRC (2007b) Seismic System Analysis, Standard Review Plan 3.7.2, Rev. 3, NUREG-0800, US Nuclear Regulatory Commission. 

  24. Xu, J., DeGrassi, G. (2000) Benchmark Program for the Evaluation of Methods to Analyze Non-Classically Damped Coupled Systems, Division of Engineering Technology, Office of Nuclear Regulatory Research, US Nuclear Regulatory Commission. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로