최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Design & manufacturing, v.16 no.4, 2022년, pp.17 - 23
김종수 (한국생산기술연구원 뿌리기술연구소)
Recently, several studies are being conducted to achieve a curvature of 180° or more for the edge of the display glass. The thermocompression molding process is applied to the manufacture of curved glass, and high hardness G5 graphite is used as the mold material to withstand the impact appli...
Ashby, M.F., "Materials Selection in Mechanical?Design", 3rd edition, Elsevier Butterworth-Heinemann, Oxford, UK, 2005
Yang, Y.K., Chuang, M.T. and Lin, S.S.,?"Optimization of dry machining parameters for?high-purity graphite in endmilling pro-cess via?design of experiments methods", J. Mater. Process.?Technol. Vol. 209, pp. 4395-4400, 2009.
Singla, A., Singh, N.K., Singh, Y. and Jangir, D.K.,?"Micro and nano-crystalline diamond coatings of?co-cemented tungsten carbide tools with their characterization", J. Bio- Tribo-Corros. Vol. 7, pp.?1-11, 2021.
Bian, R., Ferraris, E., Ynag, Y. and Qian, J.,?"Experimental investigation on ductile mode?micro-milling of ZrO2 ceramics with?diamond-coated end mills", Micromachines, Vol. 9,?127, 2018.
Hodroj, A., Teule-Gay, Lionel., Lahaye, Michel., et?al., "Nanocrystalline diamond coatings: Effects of?time modulation bias enhanced HFCVD?parameters", AIMS Materials Science, Vol. 5:3 pp.?519-532, 2018.
Wang, H., Yang, J. and Sun, F., "Cutting?performances of MCD, SMCD, NCD and?MCD/NCD coated tools in high-speed milling of?hot bending graphite molds", J. Mater. Process.?Technol., Vol. 276, 116401, 2020.
Lee, H., Kim, J., Park, J. and Kim, J., "Analysis of?Tool Wear and Roughness of Graphite Surfaces?Machined Using MCD and NCD-Coated Ball?Endmills", Micromachines, Vol. 13, 766, 2022
Kim, B.C., Yoon, H.S. and Cho, M.W.,?"Fabrication and Evaluation of Machinability of?Diamond Particle Electroplating Tool for?Cover-Glass Edge Machining", J. Korea Society of?Die & Mold Engineering, Vol. 11:1 pp.1-6, 2017.
Ha, S.J., Park, J.Y., Kim, G.H. and Yoon, G.S.,?"Micro cutting process technology for micro molds?parts", J. Korea Society of Die & Mold?Engineering, Vol. 13:1 pp.5-12, 2019.
Jung, S.T, Song, K.H., Choi, Y.J. and Baek, S.Y.,?"Research on ultra-precision fine-pattern?machining through single crystal diamond tool?fabrication technology", J. Korea Society of Die?& Mold Engineering, Vol. 14:3 pp.63-70, 2020.
Seo, K.H, Son, M.K., Yoon, G.S. and Ko, Y.B.,?"A study on machining conditions on surface?roughness in EPS End-milling", J. Korea Society?of Die & Mold Engineering, Vol. 11:2 pp.46-50,?2017.
Jung, S.T., Wi, E.C., Kim, H.J., Song, K.H. and?Baek, S.Y., "Reliability verification of cutting?force experiment by the 3D-FEM analysis from?reverse engineering design of milling tool", J.?Korea Society of Die & Mold Engineering, Vol.?13:2 pp.54-59, 2019.
Yang, M. Y., 2001, Machining -Theory and?Reality, first Edition, Cheongmoon,, Paju, pp.?41-43.
Ko, T. J., Jeong, H. and Kim, H. S., "Selection of?Machining Inclination Angle of Tool Considering?Tool Wear in High Speed Ball End Milling", J.?Korean Society of Precision Engineering, Vol.?15:9 pp.135-144, 1998.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.