해양플랜트 상구구조물의 중량 절감을 위한 알루미늄 핸드레일 적용을 위하여, 소재의 항복강도 향상 및 관련 국제기준에 부합한 강도평가를 통하여 설계가 이루어지고 있다. 기존에 해양프로젝트에 설치된 알루미늄 핸드레일은 플랫폼에 설치 시 소켓에 볼트 연결되며, 소켓의 설계 정도에 따라서 핸드레일 처짐 량이 크게 좌우된다. 그러나 국제기준에서는 소켓에 대한 중요성 언급이 없으며, 별도의 평가 절차나 기준도 모호하다. 따라서 본 연구를 통해서 핸드레일 소켓 설계 시 고려해야 하는 주요 인자들에 대한 강도 해석을 수행하고, 최적의 치수를 도출하였다. 개발모델의 구조 안전성을 확보하기 위하여, 실험을 통한 검증을 수행하였고, 국제기준에서 요구하는 허용 처짐 이내에서 모두 만족함을 확인하였다. 개발된 국산화 모델은 기존 외국 제조사와 비교하여 가볍고, 생산성이 향상되어 향후 많은 분야에서 사용이 될 것으로 판단된다.
해양플랜트 상구구조물의 중량 절감을 위한 알루미늄 핸드레일 적용을 위하여, 소재의 항복강도 향상 및 관련 국제기준에 부합한 강도평가를 통하여 설계가 이루어지고 있다. 기존에 해양프로젝트에 설치된 알루미늄 핸드레일은 플랫폼에 설치 시 소켓에 볼트 연결되며, 소켓의 설계 정도에 따라서 핸드레일 처짐 량이 크게 좌우된다. 그러나 국제기준에서는 소켓에 대한 중요성 언급이 없으며, 별도의 평가 절차나 기준도 모호하다. 따라서 본 연구를 통해서 핸드레일 소켓 설계 시 고려해야 하는 주요 인자들에 대한 강도 해석을 수행하고, 최적의 치수를 도출하였다. 개발모델의 구조 안전성을 확보하기 위하여, 실험을 통한 검증을 수행하였고, 국제기준에서 요구하는 허용 처짐 이내에서 모두 만족함을 확인하였다. 개발된 국산화 모델은 기존 외국 제조사와 비교하여 가볍고, 생산성이 향상되어 향후 많은 분야에서 사용이 될 것으로 판단된다.
The aluminum handrails used for promoting structural strength and weight reduction of the topside in an offshore platform are designed according to international standards (ISO, NORSOK, and Austria Standard), and consider the most conservative load combinations. Existing aluminum handrails are bolte...
The aluminum handrails used for promoting structural strength and weight reduction of the topside in an offshore platform are designed according to international standards (ISO, NORSOK, and Austria Standard), and consider the most conservative load combinations. Existing aluminum handrails are bolted to a socket when installed on the topside of a platform, and the amount of deflection of the handrail is largely influenced by the socket design. However, the importance of socket design has been overlooked, and furthermore, separate evaluation procedures or guidance for socket design are ambiguous. Therefore, a series analysis was performed for estimating the structural strength of aluminum handrails to obtain the governing parameters that minimize their deflection against loads. Experimental verification was performed to validate the structural safety of the new model, and we confirmed that all were satisfied within allowable deflection according to international standards. The developed model could be used in several areas in the future as it is lighter and more productive compared to existing models from overseas makers.
The aluminum handrails used for promoting structural strength and weight reduction of the topside in an offshore platform are designed according to international standards (ISO, NORSOK, and Austria Standard), and consider the most conservative load combinations. Existing aluminum handrails are bolted to a socket when installed on the topside of a platform, and the amount of deflection of the handrail is largely influenced by the socket design. However, the importance of socket design has been overlooked, and furthermore, separate evaluation procedures or guidance for socket design are ambiguous. Therefore, a series analysis was performed for estimating the structural strength of aluminum handrails to obtain the governing parameters that minimize their deflection against loads. Experimental verification was performed to validate the structural safety of the new model, and we confirmed that all were satisfied within allowable deflection according to international standards. The developed model could be used in several areas in the future as it is lighter and more productive compared to existing models from overseas makers.
AISC(2005), American Institute of Steel Construction, Specification for Structural Steel Buildings, Chapter B-H, pp. 10-76.
API(2014), American Petroleum Institute, API Recommended Practice 2A-WSD, Planning, Designing and Constructing Fixed Offshore Platforms-Working Stress Design, Chapter 4-7, pp. 5-86.
ASTM E8/E8M Standard Test Method(2008), Tension test of metallic materials, pp. 1-28.
BS EN 16116-1(2013), Railway Applications - Design Requirements for Steps, Handrails and Associated Access for Staff, Part 1:Passenger Vehicles, Luggage Vans and Locomotives.
David, E. and P. E. Billingsley(2018), BOL Aluminium Railing System Load Analysis, 2012 IBC/IRC project, pp. 3-28.
EN ISO 14122-3(2011), Safety of Machinery - Permanent Means of Access to Machinery, Part 3: Stairs, Stepladders and Guard-rails, International Organization for Standardization.
Kim, S. W., D. S. Park, and C. H. Lee(2006), Structural Performance Evaluation of Tempered Glass Guard and Handrail System Based on Full-Scale Test, Journal of the Architectural Institute of Korea, Vol. 22, pp. 43-52.
Kim, Y. H., J. S. Park, H. C. Shin, S. J. Kim, D. K. Park, Y. C. Ha, and J. K. Seo(2020), A Review of IOSS Design Standardization Technology for Alumnium Alloy Handrail of Offshore Platform, Journal of Ocean Engineering and Technology, Vol. 34, pp. 208-2016.
Park, C. J.(2004), Improvement of Handrail Slippage Characteristics Using Multi-Body Dynamic Analysis Technique, Transaction of the Korean Society Mechanical Engineers, Vol. 28, pp. 1422-1428.
Park, J. S. and J. K. Seo(2017), Deformation-Based Design Method of Aluminium Helideck for Eurocode 9, Journal of Applied Mechanical Engineering, Vol. 6, Issue 2, pp. 1-8.
MSC Software(2012), Patran 2012 User's Guide, Chapter 6, Material modeling, pp. 125-136.
NORSOK(2004), Design of steel structures, Rev.02, Chapter 7, pp. 45-46.
AI-Helper
※ AI-Helper는 부적절한 답변을 할 수 있습니다.