최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Nuclear engineering and technology : an international journal of the Korean Nuclear Society, v.54 no.12, 2022년, pp.4499 - 4513
Dahyeon Woo (Department of Nuclear Eng., Seoul National Univ.) , Youho Lee (Department of Nuclear Eng., Seoul National Univ.)
Spent fuel behavior of dry storage was simulated in a continuous state from steady-state operation by modifying FRAPCON-4.0 to incorporate spent fuel-specific fuel behavior models. Spent fuel behavior of a typical PWR was compared with that of NuScale Power Module (NPMTM). Current PWR discharge burn...
P.A.C. Raynaud, R.E. Einziger, Cladding stress during extended storage of high?burnup spent nuclear fuel, J. Nucl. Mater. 464 (2015) 304-312.
J. Kim, H. Yoon, D. Kook, Y. Kim, A study on the initial characteristics of domestic spent nuclear fuels for long term dry storage, Nucl. Eng. Technol. 45?(2013) 377-384.
J. Hamalainen, V. Suolanen, SAFIR2018-The Finnish Research Programme on?Nuclear Power Plant Safety 2015-2018: Interim Report, VTT Technical?Research Centre of Finland, VTT Technology, 2017, p. 387. No. 924.
L.E. Herranz, J. Penalva, F. Feria, CFD analysis of a cask for spent fuel dry?storage: model fundamentals and sensitivity studies, Ann. Nucl. Energy 76?(2015) 54-62, https://doi.org/10.1016/J.ANUCENE.2014.09.032.
ARIS, Technical data (n.d.), https://aris.iaea.org/sites/burnup.html. (Accessed?27 May 2022).
V. V Rondinella, R.J.M. Konings, J.P. Glatz, P.D.W. Bottomley, T.A.G. Wiss,?D. Papaioannou, O. Benes, J.Y. Colle, C.T. Walker, S. Bremier, D. Serrano-Purroy,?D. Staicu, D. Manara, L. Vlahovic, P. Poml, T. Fanghanel, Properties and?Behaviour of Irradiated Fuel under Accident Conditions, International Atomic?Energy Agency (IAEA), 2012. IAEA-CNd209.
U.S. NRC, Cladding considerations for the transportation and storage of spent?fuel, Interim Staff Guidance-11 Rev 3 (2003).
Y. Rashid, R. Dunham, Creep Modeling and Analysis Methodology for Spent?Fuel in Dry Storage, Electric Power Research Institute Technical Report, 2001.?EPRI-1003135.
E.P. Simonen, E.R. Gilbert, DATING: A Computer Code for Determining?Allowable Temperatures for Dry Storage of Spent Fuel in Inert and Nitrogen?Gases, Pacific Northwest Lab., Richland, WA (USA), 1988.
International Atomic Energy Agency (IAEA), Durability of Spent Nuclear Fuels?and Facility Components in Wet Storage, International Atomic Energy Agency?(IAEA), 1998. No. TECDOC-1012.
F. Feria, L. Herranz, , J.P.-A. of N. Energy, undefined, On the Way to Enabling?FRAPCON-3 to Model Spent Fuel under Dry Storage Conditions: the Thermal?Evolution, Elsevier, 2015 (n.d.), https://www.sciencedirect.com/science/article/pii/S030645491500376X. (Accessed 27 May 2022).
J.A. Fort, D.J. Richmond, J.M. Cuta, S.R. Suffield, Thermal Modeling of the TN-32B Cask for the High Burnup Spent Fuel Data Project, Pacific Northwest?National Lab.(PNNL), Richland, WA (United States), 2019.
NuScale Power, NuFuel-HTP2™ Fuel and Control Rod Assembly Designs,?NuScale Power, LLC, 2017.
G.M. O'Donnell, H.H. Scott, R.O. Meyer, A New Comparative Analysis of LWR?Fuel Designs, Division of Systems Analysis and Regulatory Effectiveness, Office?of Nuclear, 2001.
N.E. Todreas, M.S. Kazimi, M. Massoud, Nuclear Systems Volume II: Elements?of Thermal Hydraulic Design, CRC Press, Boca Raton, 2021.
A. Mieloszyk, An Improved Structural Mechanics Model for the FRAPCON?Nuclear Fuel Performance Code, MS Thesis, Massachusetts Institute of Technology, 2012.
W. Lyon, A. Mai, W. Liu, N. Capps, J. Rashid, A. Machiels, K. Waldrop, Impact of?fuel-cladding bonding on the response of high burnup spent fuel subjected to?transportation accidents, Proc. Top Fuel, Prague Czech Republic. (2018).?September 30 - October 04. Paper No. A0118.
K.J. Geelhood, W.G. Luscher, P.A. Raynaud, I.E. Porter, FRAPCON-4.0: A Computer Code for the Calculation of Steady-State, Thermal-Mechanical Behavior?of Oxide Fuel Rods for High Burnup, vol. 1, Pacific Northwest National Laboratory, Richland, WA, 2015.
G. Sabol, G. Moan, Zirconium in the Nuclear Industry: Twelfth International?Symposium, ASTM International, West Conshohocken, 2000.
S. Bang, H. Kim, J. Noh, D. Kim, K. Keum, Y.L.-N.E. and, undefined, Temperature-dependent Axial Mechanical Properties of Zircaloy-4 with Various?Hydrogen Amounts and Hydride Orientations, Elsevier, 2022 (n.d.), https://www.sciencedirect.com/science/article/pii/S1738573321006379. (Accessed?27 May 2022).
Y. Kim, D. Kook, T. Kim, J.K.-J. of N. Science, undefined, Stress and?temperature-dependent hydride reorientation of Zircaloy-4 cladding and its?effect on the ductility degradation, Taylor Fr 52 (2015) (2015) 717-727,?https://doi.org/10.1080/00223131.2014.978829.
D. Kim, D. Kim, D. Woo, Y.L.-J. of N. Materials, undefined, Development of an?Image Analysis Code for Hydrided Zircaloy Using Dijkstra's Algorithm and?Sensitivity Analysis of Radial Hydride Continuous Path, Elsevier, 2022 (n.d.),?https://www.sciencedirect.com/science/article/pii/S002231152200143X.?(Accessed 27 May 2022).
D. Kim, J. Kang, Y.L.- Materialia, undefined, Accurate Prediction of Threshold?Stress for Hydride Reorientation in Zircaloy-4 with Directly Measured Interface Orientation Relationship, Elsevier, 2022 (n.d.), https://www.sciencedirect.com/science/article/pii/S2589152921002933. (Accessed 27 May?2022).
P. Konarski, C. Cozzo, G.K.-J. of N., undefined, Spent Nuclear Fuel in Dry Storage?ConditionseCurrent Trends in Fuel Performance Modeling, Elsevier, 2021 (n.d.?https://www.sciencedirect.com/science/article/pii/S0022311521003615.?(Accessed 27 May 2022).
E. Gilbert, E. Simonen, C. Beyer, P. Medvedev, Update of CSFM Methodology?for Determining Temperature Limits for Spent Fuel Dry Storage in Inert Gas,?Pacific Northwest Lab, 2001. Richland, Wa.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.