미세먼지 배출 허용 기준이 강화됨에 따라 화력발전소, 제철소, 산업용 열병합 발전소 등 배가스 배출 시설의 미세먼지 제거를 위해 고효율 집진장치 수요가 급증하고 있다. 본 연구에서는 기존 전기집진기에 정전분무 기술을 도입하여 단점을 보완하고 성능을 향상시키는 연구를 진행 중이다. 정전분무는 매우 미세한 액적을 생성하는 목적으로 주로 사용되어왔지만, 집진을 목적으로 할 때는 그 유량이 10mL/min으로 65 ~ 200배에 달하는 고유량 조건이 필요하다. 고유량의 정전분무는 저유량과는 완전하게 다른 분무 형상이 나타나며 코로나 방전 사진 촬영, 그림자 촬영법 등 다양한 촬영을 통하여 이를 가시화하였다.
미세먼지 배출 허용 기준이 강화됨에 따라 화력발전소, 제철소, 산업용 열병합 발전소 등 배가스 배출 시설의 미세먼지 제거를 위해 고효율 집진장치 수요가 급증하고 있다. 본 연구에서는 기존 전기집진기에 정전분무 기술을 도입하여 단점을 보완하고 성능을 향상시키는 연구를 진행 중이다. 정전분무는 매우 미세한 액적을 생성하는 목적으로 주로 사용되어왔지만, 집진을 목적으로 할 때는 그 유량이 10mL/min으로 65 ~ 200배에 달하는 고유량 조건이 필요하다. 고유량의 정전분무는 저유량과는 완전하게 다른 분무 형상이 나타나며 코로나 방전 사진 촬영, 그림자 촬영법 등 다양한 촬영을 통하여 이를 가시화하였다.
The demand for high-efficiency dust collectors is rapidly increasing to remove PM from exhaust gas emission facilities, such as thermal power plants, steel mills, and industrial cogeneration plants, as the Pmemission standards have been strengthened. In this study, the electrospray is adapted for ex...
The demand for high-efficiency dust collectors is rapidly increasing to remove PM from exhaust gas emission facilities, such as thermal power plants, steel mills, and industrial cogeneration plants, as the Pmemission standards have been strengthened. In this study, the electrospray is adapted for existing electrosratic precipitator(EP) to remedy its shortcomings and to improve the performance. Electrospray has been mainly used for the purpose of generating very fine droplets, but fir the purpose of EP, the flow rate over 10 mL/min per nozzleis required, and a high flow rate condition of 65 to 200 times is required. The electrospray of high flow rate has a completely different spray shape from the low flow rate condition, and was visualized through various figures such as corona discharge photographs and shadow images.
The demand for high-efficiency dust collectors is rapidly increasing to remove PM from exhaust gas emission facilities, such as thermal power plants, steel mills, and industrial cogeneration plants, as the Pmemission standards have been strengthened. In this study, the electrospray is adapted for existing electrosratic precipitator(EP) to remedy its shortcomings and to improve the performance. Electrospray has been mainly used for the purpose of generating very fine droplets, but fir the purpose of EP, the flow rate over 10 mL/min per nozzleis required, and a high flow rate condition of 65 to 200 times is required. The electrospray of high flow rate has a completely different spray shape from the low flow rate condition, and was visualized through various figures such as corona discharge photographs and shadow images.
Kim, H. -J., Kim, J. -H., and Kim, J. -H., 2015, "Evaluation of Particle Collection Efficiency in a Wet Electrostatic Precipitator Using an Electrosprayed Discharge Electrode," Journal of Korean Society for Atmospheric Environment, Vol. 36, No. 6, pp. 530~537.
A J. Fernandez de la Mora, I.G. Loscertales, 1994, "The current emitted by highly conducting Taylor cones", Journal of Fluid Mechanics, Vol. 260, pp. 155~184.
A. Jaworek, A. Krupa, 1997, "Studies of the corona discharge in EHD spraying", Journal of Electrostatics, 40-41, pp. 173~178.
H.H. Kim, Y. Teramoto, N. Negishi, A. Ogata, J.H. Kim, B. Pongrac, Z. Machala, Alfonso M. and Ganan-Calvo, 2014, "Polarity effect on the electrohydrodynamic (EHD) spray of water", Journal of Aerosol Science, Vol. 76, pp. 98~114.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.