최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국추진공학회지 = Journal of the Korean Society of Propulsion Engineers, v.26 no.1, 2022년, pp.47 - 59
안종현 (School of Mechanical Engineering, Chungbok National University) , 임하영 (Launcher Propulsion Control Team, Korea Aerospace Research Institute) , 안규복 (School of Mechanical Engineering, Chungbok National University)
Four swirl coaxial injectors with different recess lengths were manufactured using an additive manufacturing method. Single-injection and bi-injection cold-flow experiments were performed using water and air as simulated propellants in an atmospheric pressure environment. According to the recess len...
Wong, K.V. and Hernandez, A., "A Review of Additive Manufacturing," International Scholarly Research Network, Vol. 2012, pp. 1-10, 2012.
Gill, G.S. and Nurick, W.H., "Liquid Rocket Engine Injectors," NASA SP-8089, 1976.
Soller, S., Barata, A., Beyer, S., Dahlhaus, A. Guichard, D., Humbert, E., Kretschmer, J. and Zeiss, W., "Selective Laser Melting (SLM) of Inconel 718 and Stainless Steel Injectors for Liquid Rocket Engines," Space Propulsion 2016 Proceedings, Rome, Italy, SPC 2016-312478, May 2016.
Terracciano, A., Carapellese, S., Bianchi, G., Liuzzi, D., Rudnykh, M., Drigo, D. and Del Brusco, F., "Additive Layer Manufacturing Technology In Avio Injector Head Design," 7th European Conference for Aeronautics and Space Science, Milano, Italy, EUCASS 2017-455, Jul. 2017.
Soller, S., Beyer, S., Dahlhaus, A., Konrad, A., Kretschmer, J., Rackemann, N. and Zeiss, W., "Development of Liquid Rocket Engine Injectors Using Additive Manufacturing," 6th European Conference for Aeronautics and Space Science, Krakow, Poland, EUCASS 2015-031, Jun. 2015.
Lim, H.Y. and Roh, W.R., "Selective Laser Melting(SLM) for LOx/Methane Mixing Head," 53rd KSPE Fall Conference, Busan, Korea, pp. 325-328, Nov. 2019.
Huzel, D.K. and Huang, D.H., Modern Engineering for Design of Liquid-Propellant Rocket Engines, Progress in Astronautics and Aeronautics, Washington, D.C., U.S.A., 1992.
Kang, J., Li, Q., Zhang, J. and Cheng, P., "Effects of Gas Liquid Ratio on the Atomization Characteristics of Gas-Liquid Swirl Coaxial Injectors," Acta Astronautica, Vol. 146, pp. 24-32, 2018.
Dombrowski, N. and Johns, W.R., "The Aerodynamic Instability and Disintegration of Viscous Liquid Sheet," Chemical Engineering Science, Vol. 18, No. 3, pp. 203-214, 1963.
Yang, L., Ge, M., Zhang, M., Fu, Q. and Cai, G., "Spray Characteristics of a Recessed Gas-Liquid Coaxial Swirl Injector," Journal of Propulsion and Power, Vol. 24, No. 6, pp. 1332-1339, 2008.
Jeong, G., Lee, Y., Yoon, J., Jo, H. and Yoon, Y., "Atomization and Distribution of Droplets in Gas-Liquid Sprays by Coaxial Swirl Injectors," Atomization and Sprays, Vol. 30, No. 8, pp. 607-626, 2020.
Yap, C.Y., Chua, C.K., Dong, Z.L., Liu, Z.H., Zhang, D.Q., Loh, L.E. and Sing, S.L., "Review of Selective Laser Melting: Materials and Applications," Applied Physics Reviews, Vol. 2, No. 4, 041101, 2015.
Van den Bosch, C.J.H. and Weterings, R.A.P.M., Methods for the Calculation of Physical Effects, 3rd Ed., Yellow Book, CPR 14E, The Hague, Netherlands, 2005.
Ahn, K. and Choi, H., "An Extensive Study on the Discharge Coefficients of Open-type Swirl Injectors," Atomization and Sprays, Vol. 27, No. 10, pp. 835-846, 2017.
Otsu, N., "A Threshold Selection Method from Gray-level Histograms," IEEE Transactions on Systems, Man, and Cybernetics, Vol. 9, No. 1, pp. 62-66, 1979.
Canny, J., "A computational approach to edge detection," IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. PAMI-8, No. 6, pp. 679-698, 1986.
Mayer, W. and Krulle, G., "Rocket Engine Coaxial Injector Liquid/Gas Interface Flow Phenomena," Journal of Propulsion and Power, Vol. 11, No. 3, pp. 513-518, 1995.
Fu, Q., Yang, L. and Qu, Y., "Measurement of Annular Liquid Film Thickness in an Open-end Swirl Injector," Aerospace Science and Technology, Vol. 15, No. 2, pp. 117-124, 2011.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.