최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.31 no.4, 2022년, pp.207 - 213
이종언 (경북대학교 신소재공학부) , 이교명 (경북대학교 신소재공학부) , 차재원 (경북대학교 신소재공학부) , 박성혁 (경북대학교 신소재공학부)
In this study, variations in the microstructure and hardness of a low-carbon SCM415 steel with austenitizing temperature and cooling rate are investigated. When the austenitizing temperature is lower than the A1 temperature (738.8 ℃) of the SCM415 steel, the microstructures of both the air-co...
H.S. Hwang, U.C. Chung, W.S. Chung, Y.R. Cho, B.H. Jung, G.P. Martin, 2004, Carburization of Iron Using CO-H 2 Gas Mixture, Met. Mater. Int., Vol. 10, pp. 77-82. https://doi.org/10.1007/BF03027366
D.W. Kim, Y.G. ho, H.H. Cho, S.H. Kim, W.B. Lee, M.G. Lee, H.N. Han, 2011, A Numerical Model for Vacuum Carburization of an Automotive Gear Ring, Met. Mater. Int., Vol. 17, pp. 885-890. https://doi.org/10.1007/s12540-011-6004-x
M. Jung, S. Oh, Y.K. Lee, 2009, Predictive Model for the Carbon Concentration Profile of Vacuum Carburized Steels with Acetylene, Met. Mater. Int., Vol. 15, pp. 971-975. https://doi.org/10.1007/s12540-009-0971-1
J.H. An, J. Lee, Y.S. Kim, W.C. Kim, J.G. Kim, 2019, Effects of Post Weld Heat Treatment on Mechanical and Electrochemical Properties of Welded Carbon Steel Pipe, Met. Mater. Int., Vol. 25, pp. 304-312. https://doi.org/10.1007/s12540-018-0201-9
C. Pandey, M.M. Mahapatra, P. Kumar, A. Giri, 2017, Microstructure Characterization and Charpy Toughness of P91 Weldment for As-Welded, Post-Weld Heat Treatment and Normalizing & Tempering Heat Treatment, Met. Mater. Int., Vol. 23, pp. 900-914. https://doi.org/10.1007/s12540-017-6850-2
Z. Nasiri, S. Ghaemifar, M. Nagizadeh, H. Mirzadeh, 2021, Thermal Mechanisms of Grain Refinement in Steels: A Review, Met. Mater. Int., Vol. 27, pp. 2078-2094. https://doi.org/10.1007/s12540-020-00700-1
C.S. Oh, H.N. Han, C.G. Lee, T.H. Lee, S.J. Kim, 2004, Effect of Mo on dynamic recrystallization and microstructure development of microalloyed steels, Met. Mater. Int., Vol. 23, pp. 778-787. https://doi.org/10.1007/BF03027339
W.C. Leslie, 1981, The Physical Metallurgy of Steels, McGraw-Hill, New York. pp. 257.
K.W. Andrews, 1965, Empirical formulae for the calculation of some transformation temperatures, J. Iron Steel Inst., Vol. 203, pp. 721-729.
J.D. Verhoeven, 2000, A review of microsegregation induced banding phenomena in steels, J. Mater. Eng. Perform., Vol. 9, pp. 286-296. https://doi.org/10.1361/105994900770345935
M.L. Lima, E. Albertin, E.R. Correa, R.B. Rabello, S. Uehara, 2020, Pearlite refining strategies for hypoeutectic gray cast iron, Int. J. Met., Vol. 14, pp. 766-773. https://doi.org/10.1007/s40962-020-00413-6
T. Maki, K. Tsuzki, I. Tamura, 1980, The morphology of microstructure composed of lath martensites in steels, Trans. Iron Steel Inst. Jpn., Vol. 20, pp. 207-214. https://doi.org/10.2355/isijinternational1966.20.207
Y. Prawoto, N. Jasmawati, K. Sumeru, 2012, Effect of prior austenite grain size on the morphology and mechanical properties of martensite in medium carbon steel, J. Mater. Sci. Technol., Vol. 28, pp. 461-466. http://doi.org/10.1016/S1005-0302(12)60083-8
M.J. Santofimia, L. Zhao, R. Petrov, C. Kwakernaak, W.G. Sloof, J. Sietsma, 2011, Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel, Acta Mater., Vol. 59, pp. 6059-6068. https://doi.org/10.1016/j.actamat.2011.06.014
V.F. Zackay, H.I. Aaronson, 1962, Decomposition of Austenite by Diffusional Processes, Interscience, New York. pp. 197-237.
D. Zeng, L. Lu, N. Zhang, Y. Gong, J. Zhang, 2016, Effect of different strengthening methods on rolling/sliding wear of ferrite-pearlite steel, Wear, Vol. 358-359, pp. 66-71. https://doi.org/10.1016/j.wear.2016.04.003
A.M. Elwazri, P. Wanjara, S. Yue, 2005, The effect of microstructural characteristics of pearlite on the mechanical properties of hypereutectoid steel, Mater. Sci. Eng. A, Vol. 404, pp. 91-98. https://doi.org/10.1016/j.msea.2005.05.051
G. Krauss, 1999, Martensite in steel: strength and structure, Mater. Sci. Eng. A, Vol. 273-275, pp. 40-57. https://doi.org/10.1016/S0921-5093(99)00288-9
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.