최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국수소 및 신에너지학회 논문집 = Transactions of the Korean Hydrogen and New Energy Society, v.33 no.4, 2022년, pp.430 - 436
쉐흐리야 이샤크 (경북대학교 기계공학부) , 나비드 울라 (경북대학교 기계공학부) , 최준호 (하이박 기술연구소) , 김만회 (경북대학교 기계공학부)
This paper presents the numerical model development of a microchannel heat exchanger in mobile air-conditioning and heat pump applications. The model has been developed based on the effectiveness-NTU method using a segment-by-segment modeling approach. State-of-art correlations are used for refriger...
S. G. Kandlikar, S. Colin, Y. Peles, S. Garimella, R.F. Pease, J. J. Brandner, and D. B. Tuckerman, "Heat transfer in microchannels-2012 status and research needs", J. Heat Transfer, Vol. 135, No. 9, 2013, pp. 091001, doi: https://doi.org/10.1115/1.4024354.
M. H. Kim and C. W. Bullard, "Performance evaluation of a window room air conditioner with microchannel condensers", J. Energy Resour. Technol., Vol. 124, No. 1, 2002, pp. 47-55, doi: https://doi.org/10.1115/1.1446072.
J. C. S. Garcia, H. Tanaka, N. Giannetti, Y. Sei, K. Saito, M. Houfuku, and R. Takafuji, "Multiobjective geometry optimization of microchannel heat exchanger using real-coded genetic algorithm", Appl. Therm. Eng., Vol. 202, 2022, pp. 117821, doi: https://doi.org/10.1016/j.applthermaleng.2021.117821.
C. H. Kim, H. S. Kim, H. S. Lim, J. W. Choi, I. H. Choi, and N. H. Kim, "Two-phase refrigerant distribution for a horizontal header/horizontal mini-channel tube config- uration", Heat Mass Transf., Vol. 58, 2022, pp. 587-600, doi: https://doi.org/10.1007/s00231-021-03135-5.
A. Saleem and M. H. Kim, "Air-side thermal hydraulic perform ance of m icrochannel heat exchangers w ith different fin configurations", Appl. Therm. Eng., Vol. 125, 2017, pp. 780-789, doi: https://doi.org/10.1016/j.applthermaleng.2017.07.082.
H. Lim, U. Han, and H. Lee, "Design optimization of bare tube heat exchanger for the application to mobile air conditioning systems", Appl. Therm. Eng., Vol. 165, 2020, pp. 114609, doi: https://doi.org/10.1016/j.applthermaleng.2019.114609.
Z. Li, J. Ling, V. Aute, and R. Radermacher, "Investigation of port level refrigerant flow maldistribution in microchannel heat exchanger", 12th IEA Heat Pump Conference, 2017, pp. 1-11. Retrieved from http://hpc2017.org/wp-content/uploads/2017/05/O.3.1.4-Investigation-of-Port-Level-Flow-Maldistribution-in-Microchannel-Heat-Exchanger.pdf.
E. Da Riva and D. Del Col, "Effect of gravity during condensation of R134a in a circular minichannel : VOF simulation of annular condensation", Microgravity Sci. Techn., Vol. 23, No. Suppl 1, 2011, pp. 87-97, doi: https://doi.org/10.1007/s12217-011-9275-4.
E. Da Riva and D. Del Col, "Numerical simulation of laminar liquid film condensation in a horizontal circular minichannel", J. Heat Transfer, Vol. 134, No. 5, 2012, pp. 051019, doi: https://doi.org/10.1115/1.4005710.
H. Ganapathy, A. Shooshtari, K. Choo, S. Dessiatoun, M. Alshehhi, and M. Ohadi, "Volume of fluid-based numerical modeling of condensation heat transfer and fluid flow characteristics in microchannels", Int. J. Heat and Mass Transfer, Vol. 65, 2013, pp. 62-72, doi: https://doi.org/10.1016/j.ijheatmasstransfer.2013.05.044.
P. Gunnasegaran, H. A. Mohammed, N. H. Shuaib, and R. Saidur, "The effect of geometrical parameters on heat transfer characteristics of microchannels heat sink with different shapes", International Communications in Heat and Mass Transfer, Vol. 37, No. 8, 2010, pp. 1078-1086, doi: https://doi.org/10.1016/j.icheatmasstransfer.2010.06.014.
H. Wang, Z. Chen, and J. Gao, "Influence of geometric parameters on flow and heat transfer performance of micro -channel heat sinks", Applied Thermal Engineering, Vol. 107, 2016, pp. 870-879, doi: https://doi.org/10.1016/j.applthermaleng.2016.07.039.
Y. Chen, C. Zhang, M. Shi, and J. Wu, "Three-dimensional numerical simulation of heat and fluid flow in noncircular microchannel heat sinks", International Communications in Heat and Mass Transfer, Vol. 36, No. 9, 2009, pp. 917-920, doi: https://doi.org/10.1016/j.icheatmasstransfer.2009.06.004.
D. Jing and L. He, "Numerical studies on the hydraulic and thermal performances of microchannels with different crosssectional shapes", International Journal of Heat and Mass Transfer, Vol. 143, 2019, pp. 118604, doi: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118604.
M. H. Kim and C. W. Bullard, "Air-side thermal hydraulic performance of multi-louvered fin aluminum heat exchangers", International Journal of Refrigeration, Vol. 25, No. 3, 2002, pp. 390-400, doi: https://doi.org/10.1016/S0140-7007(01)00025-1.
M. H. Kim, S. Y. Lee, S. S. Mehendale, and R. L. Webb, "Microchannel heat exchanger design for evaporator and condenser applications", Advances in Heat Transfer, Vol. 37, 2003, pp. 297-429, doi: https://doi.org/10.1016/S0065-2717(03)37004-2.
M.V M. Shah, "Improved correlation for heat transfer during condensation in conventional and mini/micro channels", International Journal of Refrigeration, Vol. 98, 2019, pp. 222-237, doi: https://doi.org/10.1016/j.ijrefrig.2018.07.037.
M. H. Kim and C. W. Bullard, "Development of a micro-channel evaporator model for a CO 2 air conditioning system", Energy, Vol. 26, No. 10, 2001, pp. 931-948, doi: https://doi.org/10.1016/S0360-5442(01)00042-1.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.