$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

[국내논문] 결정질 실리콘 태양전지에 적용될 스크린 프린팅 기술 개발 동향 : 리뷰
Screen Printing Method on Crystalline Silicon Solar Cells : A Review 원문보기

Current photovoltaic research = 한국태양광발전학회논문지, v.10 no.3, 2022년, pp.90 - 94  

전영우 (에너지융합학과, 청주대학교) ,  장민규 (에너지융합학과, 청주대학교) ,  김민제 (에너지융합학과, 청주대학교) ,  이준신 (정보통신공학부, 성균관대학교) ,  박진주 (에너지융합학과, 청주대학교)

Abstract ▼ AI-Helper 아이콘AI-Helper

The screen-printing method is the most mature solar cell fabrication technology, which has the advantage of being faster and simpler process than other printing technology. A front metallization printed through screen printing influences the efficiency and manufacturing cost of solar cell. Recent te...

주제어

#Metallization   #Series resistance   #Screen-printing method   #Shading loss  

표/그림 (2)

참고문헌 (46)

  1. Danjela Kuscer, "Screen Printing," Encyclopedia of Materials: Technical Ceramics and Glasses, 1, 227-232 (2021). 

  2. ITRPV, International Technology Roadmap for Photovoltaic (ITRPV): Results 2021, (twelfth ed.), 13-24 (2021). 

  3. Chen Daming et al., "24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design," Solar Energy Materials and Solar Cells, 206, 110258 (2020). 

    상세보기

  4. W. Deng et al., "22.61 % Efficient Fully Screen Printed PERC Solar Cell," 2017 IEEE 44th Photovoltaic Specialist Conference (PVSC), 2220-2226 (2017). 

  5. 조성빈, 김희수, 허주열, "결정질 실리콘 태양전지 전면전극 형성기술 개발 동향," 한국태양광발전학회지, 1(2), 15-27 (2015). 

  6. Wenzel Timo et al., "Progress with screen printed metallization of silicon solar cells - Towards 20 ㎛ line width and 20 mg silver laydown for PERC front side contacts," Solar Energy Materials and Solar Cells, 244, 111804 (2022). 

  7. Hilali, M. M., "Understanding and development of manufacturable screen -printed contacts on high sheet-resistance emitters for low -cost silicon solar cells," Available from ProQuest Dissertations & Theses Global. (304999350) (2005). 

  8. M. Aoki and I. Sumita, "Requirements of Screen masks for Fine-line Printing on Textured Surface," Poster presentation at 8th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2019). 

  9. A. Mette, "Potential of both sides contacted solar cells," Presented on Crystal Clear Workshop on Metallization, 10 (2008). 

  10. M. Horteis, "Aerosol-printed silicon solar cell exceeding 20% efficiency," Presented on Crystal Clear Workshop on Metallization, 10 (2008). 

  11. D. Erath, "Advanced screen printing technique for high definition front side metallization of crystalline silicion solar cells," Presented on Crystal Clear Workshop on Metallization, 10 (2008). 

  12. M. Hofmann, D. Erath, B. Bitnar, L. Gautero, J. Nekarda, A. Grobe, D. Biro, J. Rentsch, R. Preu, "Industrial type Cz Silicon Cells with screen-printed fine line front contacts and passivated rear contacted by laser firing," Proc. Of the 23rd Photovoltaic Solar Energy Conference (EUPVSEC), 1-5 (2008). 

  13. F. Clement, "Die Metal Wrap Through Solarzelle: Entwicklung und Charakterisierung," Dissertation, Freiburg (2009). 

  14. T. Falcon, A. Hobby, "High accuracy, high aspect ratio metallization on silicon solar cells using a print on print process," Proc. Of the 25th Photovoltaic Solar Energy Conference (EUPVSEC), 1651-1655 (2010). 

  15. M. Galiazzo, V. Furin, D. Tonini, G. Cellere, A. Baccini, "Double printing of front contact Ag in c-Si solar cells," Proc. Of the 25th Photovoltaic Solar Energy Conference (EUPVSEC), 2338-2340 (2010). 

  16. P. Magnone, R. de Rose, M. Zanuccoli, D. Tonini, M. Galiazzo, G. Cellere, H.- W. Guo, M. Frei, E. Sangiorgi, C. Fiegna, "Understanding the impact of double screen-printing on silicon solar cells by 2-D numerical simulations," Conference Records of the 37th IEEE Photovoltaic Specialists Conference (PVSC), 2177-2180 (2011). 

  17. H. Hannebauer, T. Falcon, R. Hesse, T. Dullweber, R. Brendel, "18,9%-efficient screen-printed solar cells applying a print-onprint process," Proc. Of the 26th Photovoltaic Solar Energy Conference (EUPVSEC), 1607-1610 (2011). 

  18. M. Pesce, M. Maugeri, M. Marsili, M. Zarcone, D. Tonini, C. Bottosso, M. Galiazzo, A. Tomasi, "Technological and economic assessment of two-steps printing processes in a mc-Si solar cells production environment," Energy Proc. 21, 24-31 (2012). 

  19. T. Dullweber, S. Gatz, H. Hannebauer, T. Falcon, R. Hesse, J. Schmidt, R. Brendel, "Towards 20% efficient large-area screen-printed rear-passivated silicon solar cells," Prog. Photovoltaics Res. Appl. 20, 630-638 (2012). 

  20. A.F. Carroll, "Screen printed metal contacts to Si solar cells - formation and synergistic improvements," Conference Records of 39th IEEE Photovoltaic Specialists Conference (PVSC), 3435-3440 (2013). 

  21. H. Hannebauer, T. Dullweber, T. Falcon, X. Chen, R. Brendel, "Record low Ag paste consumption of 67.7 mg with dual print," Energy Proc. 43, 66-71 (2013). 

  22. Y.-H. Chang, W.-M. Su, P.-S. Huang, L.-W. Cheng, "Improvement of the solar cell efficiency by fine line print on print technology," Conference Records of 39th IEEE Photovoltaic Specialists Conference (PVSC), 2176-2178 (2013). 

  23. H. Hannebauer, T. Dullweber, U. Baumann, T. Falcon, R. Brendel, "21.2%-efficient fineline-printed PERC solar cell with 5 busbar front grid," Phys. Status Solidi Rapid Res. Lett., 675-679 (2014). 

  24. M. Galiazzo, A. Voltan, E. Bortoletto, M. Zamuner, M. Martire, O. Borsato, M. Bertazzo, D. Tonini, "Fine line double printing and advanced process control for cell manufacturing," Energy Proc. 67, 116-125 (2015). 

  25. A. Voltan, M. Galiazzo, F. Oberholtzer, M. Emsley, C.E. Dube, J.G. Graff, "Cell efficiency improvement of fully implanted nPERT solar cells realized through metallization optimization," Proc. of the 31st Photovoltaic Solar Energy Conference (EUPVSEC), 779-782 (2015). 

  26. M. Galiazzo, O. Borsato, E. Bortoletto, "Fine line double printing for today and tomorrow cell metallization and interconnection," Proc. Of the 32nd Photovoltaic Solar Energy Conference (EUPVSEC), 958-960 (2016). 

  27. M. Galiazzo, "Status and Perspectives of Metallization Technologies for HVM," Presented on 7th Metallization Workshop, 22-23 (2017). 

  28. S. Werner, E. Lohmuller, P. Saint-Cast, J. Greulich, J. Weber, S. Schmidt, A. Moldovan, A. Brand, T. Dannenberg, S. Mack, S. Wasmer, M. Demant, M. Linse, R. Ackermann, A. Wolf, R. Preu, "Key aspects for fabrication of p-type Cz-Si PERC solar cells exceeding 22% conversion efficiency," Proc. Of the 33rd Photovoltaic Solar Energy Conference (EUPVSEC), 25-29 (2017). 

  29. A. Lorenz, M. Linse, H. Frintrup, M. Jeitler, A. Mette, M. Lehner, R. Greutmann, H. Brocker, M. Konig, D. Erath, F. Clement, "Screen printed thick film metallization of silicon solar cells - recent developments and future perspectives," Proc. Of the 35th Photovoltaic Solar Energy Conference (EUPVSEC), 819-824 (2018). 

  30. F. Clement, M. Linse, S. Tepner, N. Wengenmeyr, L. Ney, K. Krieg, A. Lorenz, M. Pospischil, S. Bechmann, K. Oehrle, S. Steckemetz, R. Preu, "Project FINALE - screen and screen printing process development for ultra-fine-line contacts below 20 ㎛ finger width," Proc. Of the 36th Photovoltaic Solar Energy Conference (EUPVSEC), 9-13 (2019). 

  31. S. Tepner, N. Wengenmeyr, L. Ney, M. Linse, M. Pospischil, F. Clement, "Improving wall slip behavior of silver pastes on screen emulsions for fine line screen printing," Sol. Energy Mater. Sol. Cells, 109969 (2019). 

  32. E. Lohmuller, J. Greulich, P. Saint-Cast, S. Lohmmuller, S. Schmidt, U. Belledin, T. Fellmeth, S. Mack, G. Emanuel, K. Krieg, M. Zimmer, R. Kunert, F. Zobel, M. Linse, J. Horzel, M. Messmer, A. Wolf, R. Preu, "Front side optimization on boron- and gallium-doped Cz-Si PERC solar cells exceeding 22% conversion efficiency," Proc. Of the 37th European Photovoltaic Conference (EUPVSEC), 7-11 (2020). 

  33. S. Tepner, L. Ney, M. Linse, A. Lorenz, M. Pospischil, F. Clement, "Studying knotless screen patterns for fine line screen printing of Si solar cells," IEEE Journal of Photovoltaics, 10, 319-325 (2020). 

    상세보기

  34. S. Tepner, L. Ney, M. Linse, A. Lorenz, M. Pospischil, K. Masuri, F. Clement, "Screen pattern simulation for an improved front-side Ag-electrode metallization of Si-solar cells," Prog. Photovoltaics Res. Appl., 1054-1062 (2020). 

  35. B. B. van Aken, S. Ramesh, K. J. J. Tool, J. Loffler, A. Weeber and G. J. M. Janssen, "Optimizing front and rear metallization grids for bifacial annual yield," Poster presentation at 8th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2019). 

  36. M. Galiazzo, "Enabling 7,500 wph Productivity by a Novel Screen Printing Process," Presentation at 8th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2019). 

  37. D. Ourinson, G. Emanuel, A. Csordas, G. Dammass, H. Muller, C. Sternkiker, F. Clement and S. W. Glunz, "In-situ wafer temperature measurement during firing process via inline infrared thermography," Presentation at 8th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2019). 

  38. G. Emanuel, D. Ourinson, G. Dammass, H. Muller, C. Sternkiker, F. Ogiewa, K. Rahmanpour, T. Javaid, A. Csordas, S. Nold, S. W. Glunz and Clement, F., "Project "FEUERDRACHE": Process Development and Control of Contact Firing Processes for High-Efficiency Silicon Solar Cells," Presentation at 9th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2020). 

  39. G. Emanuel, D. Ourinson, G. Dammass, H. Muller, C. Sternkiker, F. Ogiewa, K. Rahmanpour, T. Javaid, A. Csordas, S. Nold, S. W. Glunz and F. Clement, "Project "FEUERDRACHE": Process Development and Control of Contact Firing Processes for High-Efficiency Silicon Solar Cells," These proceedings (2021). 

  40. E. Krassowski, S. Grosser, Turek, Marko, Henning, Andreas and H. Zhao, "Investigation of monocrystalline p-type PERC cells featuring the Laser Enhanced Contact Optimization process and new LECO paste," These proceedings (2021). 

  41. E. Krassowski, B. Jaeckel, U. Zeller, M. Pander, P. Schenk, Eckehard Hofmueller, "Reliability Evaluation of Photovoltaic Modules Fabricated from Treated Solar Cells by Laser-Enhanced Contact Optimization Process," Special Issue : EUPVSEC, 6, 2100537 (2022). 

  42. Yang Yi, Seyedmohammadi Shahram, Kumar Umesh, Gnizak Dave, Graddy E.d. and Shaikh Aziz, "Screen Printable Silver Paste For Silicon Solar Cells With High Sheet Resistance Emitters," Energy Procedia, 8, 607-613 (2011). 

    상세보기

  43. K. Abdel Aal and N. Willenbacher, "Highspeed Video Analysis of The Paste Transfer Process During Screen Printing," Presentation at 9th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2020). 

  44. J. J. Diaz Leon, C. Allebe, A. Ingenito, F.-J. Haug , M. Despeisse, C. Ballif and S. Nicolay, Lean "Integration of p- and n-type passivating contacts by PECVD and PVD," Presentation at 9th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2020). 

  45. A. Chaudhary, J. Hoss, Jan Lossen, Rene van Swaaij and M. Zeman, "Advancement in screen printed fire through silver paste metallisation of polysilicon based passivating contacts," Presentation at 9th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2020). 

  46. D. Erath, S. Pingel, R. Khotimah, A. De Rose, D. Eberlein, T. Wenzel, A. Lorenz and F. Clement, "Fast screen printing and curing process for silicon heterojunction solar cells," Presentation at 9th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells (2020). 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로