$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

[국내논문] 마 섬유 혼입에 따른 고밀도 섬유 시멘트 복합체의 불연 특성 연구
A Study on the Non-combustible Properties of High-density Fiber Cement Composites Mixed with Hemp Fibers 원문보기

Journal of the Korean Recycled Construction Resources Institute = 한국건설순환자원학회 논문집, v.10 no.3, 2022년, pp.314 - 320  

장경필 (한국건설기술연구원 건축연구본부) ,  송태협 (한국건설기술연구원 건축연구본부)

초록
AI-Helper 아이콘AI-Helper

건축자재에서 사용되는 보강 섬유의 기능은 휨하중에 대한 저항력 유지, 건조 수축에 의한 균열 방지 기능 등을 목적으로 하고 있다. 고밀도 섬유 시멘트 복합체는 주로 선형의 판재에 사용되는 것으로 휨 저항력을 높이기 위하여 사용한다. 따라서, 인장성, 시멘트 수화물과의 결합력, 내알칼리성 등이 요구된다. 최근 불연성능 기준이 강화되어 고온 가열 시 불꽃 발생을 최소화해야 하는 기능이 추가되었다. 따라서 유기 섬유의 사용이 제한되고 있다. 본 연구에서는 보강 섬유로 사용하는 폴리프로필렌 섬유를 내열성이 우수한 마 섬유로 대체하여 사용하는 연구를 수행하였다. 마 섬유는 내열성이 우수하고 시멘트와의 친화력이 좋으며 알칼리 저항력 또한 우수하다. 기존의 배합에서 사용하는 폴리프로필렌 섬유의 부피 총량을 기준으로 마 섬유를 대체하여 사용하여 불연성능을 비교 평가하였으며, 휨강도 등 기본 물리적 특성 시험을 진행하였다. 길이 7 mm의 마 섬유를 질량비 2 %, 3 %를 사용하여 불연 및 물리적 특성 시험을 수행한 결과 불꽃의 잔존 시간은 전혀 없는 것으로 나타났으며, 휨강도는 기존 폴리프로필렌 섬유의 95 % 수준까지 확보가 가능한 것으로 확인되었다.

Abstract AI-Helper 아이콘AI-Helper

The function of reinforcing fibers used in building materials is to maintain resistance to bending loads and to function for cracking caused by drying shrinkage. High-density fiber-cement composites are mainly used for linear plates and are used to increase bending resistance. Therefore, tensile pro...

주제어

표/그림 (14)

참고문헌 (9)

  1. Jang, B.K. (1998). Cement Materials Science, Chonnam National University Press [in Korean]. 

  2. Kim, Y.H. (2011). Strength characteristics according to the mixed CaO/SiO 2 ratio to autoclaved aerated concrete(AAC) used on the exterior panel in buildings, Journal of The Korean Digital Architecture.Interior Association, 11(3), 35-52 [in Korean]. 

  3. Kadashevich, I., Schneider, H.J., Stoyan, D. (2005). Statistical modeling of the geometrical structure of the system of artificial air pores in autoclaved aerated concrete, Cement and Concrete Research, 35(8), 1495-1502. 

  4. Min, B.R. (1998). Development of eco-friendly asbestos-free building materials practical technology, Korea Institute of Civil Engineering and Building Technology, Research Report [in Korean]. 

  5. Park, J.S., Song, T.H., Jeon, C.S. (2012). A study on the physical characteristic changes of high density cement complex using crushed stone powder from quarry, Journal of Korea Society of Waste Management, 29(8), 751-759 [in Korean]. 

  6. Song, T.H., Par, J.S., Lee, S.H. (2011a). An experimental study on the fire-resistant performance of eco-friendly extruding concrete panel, Journal of the Architectural Institute of Korea Structure & Construction, 27(12), 123-130 [In Korean]. 

  7. Song, T.H., Lee, S.H., Kim, Y.H. (2011b). Changes in physical properties depending on curing conditions of extruded cement mixture with crushed stone powder, Journal of the Architectural Institute of Korea Structure & Construction, 27(8), 97-104 [in Korean]. 

  8. Song, T.H., Jang, K.P. (2021). A study on improving the non-combustible properties of high-density fiber cement composites, Journal of the Korean Recycled Construction Resources Institute, 9(4), 521-528 [In Korean]. 

  9. Taylor, H.F.W. (1964). Hydration of Portland Cement, Cement Chemistry. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로