최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.21 no.8, 2022년, pp.25 - 31
손휘준 (창원대학교 스마트제조융합협동과정) , 김석 (창원대학교 스마트제조융합협동과정) , 박기범 (창원대학교 스마트제조기술센터) , 정현철 ((주) 티씨티) , 조영태 (창원대학교 스마트제조융합협동과정)
Recently, investment in the aerospace industry has increased, and titanium alloys have been widely adopted for manufacturing parts in the aerospace industry. The Ti-6Al-4V alloy has high strength in high-temperature and high-pressure environments and is evaluated as a material with excellent heat, c...
Lee, S. H., "A Study on the Productivity Improvement of Aircraft Parts Using AdvantEdge PM," A Thesis for a Masterate, Changwon National University, Republic of Korea, 2017.
Brewer, W. D., Bird, R. K., & Wallace, T. A., "Titanium alloys and processing for high speed aircraft," Material Science and Engineering, Vol. 243, No. 1-2, pp. 299-304, 1998.
Kim, G. H., "A Study on Characteristics of Cutting by Cutting Conditions in Titanium Machining," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 1, pp. 84-89, 2013.
Kim, N. Y., Hong, W. P., Lee, D. J., "A Study on the Cutting Characteristics and Analysis by a FEM in the Machining of Ti-6Al-4V alloy," Transactions of the Korean Society of machine Tool Engineers, Vol. 10, No. 6, 2001.
Pujana, Joseba, Rivero-Rastrero, Asun, Celaya, Ainhoa, Lopez de Lacalle, Luis Norberto, "Analysis of ultrasonic-assisted drilling of Ti6Al4V," Interational J. of Machine Tools & Manufacturing, Vol. 49, No. 6, pp. 500-508, 2009.
Lee, J. H., Kim, H. Y., Yoon, H. S., "Sustainability Analysis in Titanium Alloy Machining," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 12, pp. 73-81, 2019.
Kim, D. H., Park, K. B., Cho, Y. T., Jung, Y. G., "A Study on Improved Drill Shape for Efficient Drilling of Inconel 718 Using the Design of Experiment," Journal of Korean Society for Precision Engineering, Vol. 34, No. 3, pp. 161-166, 2017.
Kim, D. H., Jung, Y. G., Mo, Y. S., Cho, Y. T., "Cutting Characteristics and Deformation Analysis for Chord andSide Fitting Parts in an Aircraft Bulkhead," Journal of Korean Society of Manufacturing Technology Engineers, Vol. 29, No. 1, pp. 74-81, 2020.
Kim, J. M., Koo, J. Y., Jun, C. S., "Improving Machining Quality of L-Shaped Thin-Walled Structure in Milling Process of Ti-Alloy (Ti 6Al 4V)," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 20, No. 11, pp. 52-59, 2021.
Park, K. B., Cho, Y. T., Jung, Y. G., "Study on Deformation Analysis of Holes during Drilling of Aircraft Engine Compressor Cases," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 3, pp. 65-70, 2018.
Kim, D. H., Jung, Y. G., Cho, Y. T., "Study on the Selection of End Mill Shape to Improve Tool Life in End Mill Process of Ti-6Al-4V Alloy," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 11, pp. 76-82, 2019.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.