$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

단일절리 암반에서 그라우팅 주입거리 분석
Analysis of grout injection distance in single rock joint 원문보기

Journal of Korean Tunnelling and Underground Space Association = 한국터널지하공간학회논문집, v.25 no.6, 2023년, pp.541 - 554  

김지영 (부산대학교 사회환경시스템공학과) ,  원조현 (부산대학교 사회환경시스템공학과) ,  이종원 (부산대학교 생산기술연구소) ,  오태민 (부산대학교 사회환경시스템공학과)

초록
AI-Helper 아이콘AI-Helper

터널 및 에너지/폐기물 저장과 관련하여 지하공간의 활용이 증가하는 추세이다. 지하공간의 안정성 확보를 위해서는 암반균열 및 절리를 보강하는 것이 중요하다. 절리와 같은 불연속면은 암반의 강도를 저하시키고, 지하공간 내부로 지하수 유입을 발생시킬 수 있다. 불연속면 주변의 암반 강도의 증대와 차수를 위해 암반 그라우팅을 활용할 수 있다. 그러나 암반 그라우팅 시 주입재료가 암반 절리 내 원활하게 주입되고 있는지 직접적인 확인에 한계가 있다. 그라우팅 주입재가 사전에 목표한 설계안과 같이 주입되지 않을 시 강도, 내구성 증대 및 차수성 향상 효과를 볼 수 없다. 따라서 실험적으로 평가가 어려운 그라우팅 주입재가 설계대로 주입되고 있는지 수치해석을 활용하여 사전에 평가할 필요가 있다. 본 연구에서는 개별요소 수치해석 프로그램인 UDEC (Universal Distinct Element Code)을 활용한 그라우팅 주입재의 물/시멘트 배합비, 주입압력, 주입유량과 같은 주입변수에 따른 주입성능을 평가하였다. 또한 실내실험을 통해 수치해석 결과와 비교하여 수치해석 모델의 신뢰도를 검증하였다. 본 연구결과는 향후 현장에서 그라우팅 설계 시 주입재의 물성, 주입시간, 펌프 압력과 같은 변수들을 최적화할 수 있는데 도움이 될 것으로 기대된다.

Abstract AI-Helper 아이콘AI-Helper

The utilization of underground spaces in relation to tunnels and energy/waste storage is on the rise. To ensure the stability of underground spaces, it is crucial to reinforce rock fractures and discontinuities. Discontinuities, such as joints, can weaken the strength of the rock and lead to groundw...

주제어

표/그림 (12)

참고문헌 (21)

  1. Baek, S.H., Joo, H.W., Kwon, T.H., Han, J.T., Lee, J.H., Yoo, W.K. (2020), "Effect of permeability?anisotropy on the effective radius of grout bulb in horizontal permeation grouting - numerical study",?Journal of the Korean Geotechnical Society, Vol. 36, No. 11, pp. 149-156. 

  2. Bandis, S.C., Lumsden, A.C., Barton, N.R. (1983), "Fundamentals of rock joint deformation", International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, Vol. 20, No. 6, pp.?249-268. 

  3. Barton, N., Choubey, V. (1977), "The shear strength of rock joints in theory and practice", Rock mechanics, Vol. 10, pp. 1-54. 

  4. Barton, N., Lien, R., Lunde, J.J.R.M. (1974), "Engineering classification of rock masses for the design of?tunnel support", Rock mechanics, Vol. 6, pp. 189-236. 

  5. Choi, S.O., Chung, S.K. (2004), "Stability analysis of jointed rock slopes with the Barton-Bandis constitutive model in UDEC", International Journal of Rock Mechanics and Mining Sciences, Vol. 41, No. 3,?pp. 581-586. 

  6. Hong, S.Y., Kwon, S.H., Min, K.B., Ji, S.H. (2021), "Effect of excavation and thermal stress on slip zone?and aperture change around disposal hole and tunnel in fractured rock", Tunnel and Underground Space,?Vol. 31, No. 2, pp. 125-144. 

  7. Jeon, K.H., Ryu, D.W., Kim, H.M., Park, E.S., Song, J.J. (2010), "Numerical analysis of grout flow and injection pressure affected by joint roughness and aperture", Tunnel and Underground Space, Vol. 20,?No. 2, pp. 82-91. 

  8. Kim, J.H., Choi, B.I. (2018), "Mechanical and microstructural analysis of cement suspension", Magazine?of the Korea Concrete Institute, Vol. 30, No. 3, pp. 33-37. 

  9. Kim, J.M., Lee, E.K. (2022), "A fundamental study on the criteria of basic parameters for planning rock?grouting", Journal of the Korean Geotechnical Society, Vol. 38, No. 2, pp. 15-27. 

  10. Kim, S.H., Kim, T.K., Choi, J.I., Yim, K.W. (2010), "A study on the injection efficiency and strength for?grouting method", Journal of the Korean Geotechnical Society, Vol. 26, No. 9, pp. 47-58. 

  11. Koh, H.S., Cho, B.J. (2021), "Performance evaluation of injection grouting method for structure foundation ground improvement", Journal of Disaster and Safety, Vol. 3, No. 1, pp. 1-10. 

  12. Lee, J.W., Kim, H.M., Yazdani, M., Park, E.S. (2017), "Influence of design parameters of grout injection?in rock mass using numerical analysis", Tunnel and Underground Space, Vol. 27, No. 5, pp. 324-332. 

  13. Lee, J.W., Kim, J.Y., Weon, J.H., Oh, T.M. (2022), "Time-dependent characteristics of viscous fluid for?rock grouting", Journal of Korean Tunnelling and Underground Space Association, Vol. 24, No. 6, pp.?465-481. 

  14. Lee, W.H., Lim, H.D. (2007), "Analysis of fine particle transfer and shear strength increase using PFC in?permeation grouting", Journal of the Korean Geotechnical Society, Vol. 23, No. 11, pp. 49-58. 

  15. Nam, H.Y., Lee, W.J., Lee, C.H., Choo, H.W. (2018), "Estimation of unconfined compressive strength?(UCS) of microfine cement grouted sand", Journal of the Korean Geotechnical Society, Vol. 34, No. 7,?pp. 5-15. 

  16. Oh, J.Y., Park, H.K., Chang, S.B., Choi, H.S. (2018), "Numerical investigation on the effect of backfill?grouting on ground behavior during shield TBM tunneling in sandy ground", Journal of Korean Tunnelling?and Underground Space Association, Vol. 20, No. 2, pp. 375-392. 

  17. Park, J.H., Park, Y.W. (2003), "Investigation of the optimum injection pressure in pressure grouting by?laboratory model tests", Journal of the Korean Geotechnical Society, Vol. 19, No. 2, pp. 217-225. 

  18. Park, J.W., Park, C.H., Lee, C.S. (2021), "Hydro-mechanical modeling of fracture opening and slip using?grain-based distinct element model: DECOVALEX-2023 Task G (Benchmark Simulation)", Tunnel and?Underground Space, Vol. 31, No. 4, pp. 270-288. 

  19. Saeidi, O., Ramezanzadeh, A., Sereshki, F., Jalali, M.E. (2013a), "Numerical modeling of the effects of?joint hydraulic aperture, orientation and spacing on rock grouting using UDEC: a case study of Bakhtiary?Dam of Iran", Journal of Mining and Environment, Vol. 4, No. 1, pp. 15-26. 

  20. Saeidi, O., Stille, H., Torabi, S.R. (2013b), "Numerical and analytical analyses of the effects of different?joint and grout properties on the rock mass groutability", Tunnelling and Underground Space Technology,?Vol. 38, pp. 11-25. 

  21. Yoon, I.K., Moon, J.H., Lee, J.S., Kim, Y.K. (2021), "Characteristics of high-viscosity grouting materials?for rock joint reinforcement of deep tunnel", Journal of the Korean Geo-Environmental Society, Vol. 22,?No. 12, pp. 59-63. 

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로