최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.32 no.1, 2023년, pp.5 - 11
이성민 (한국생산기술연구원 스마트제조기술연구그룹) , 이인규 (한국생산기술연구원 스마트제조기술연구그룹) , 이성윤 (한국생산기술연구원 스마트제조기술연구그룹) , 황선광 (한국생산기술연구원 스마트제조기술연구그룹) , 박재욱 (대한메탈 주식회사, 기술연구소) , 황원석 (대한메탈 주식회사, 기술연구소) , 문영훈 (부산대학교 기계공학부) , 이상곤 (한국생산기술연구원 스마트제조기술연구그룹)
The aim of this study is to manufacture an aluminum pipe yoke of automotive steering system for lightweight. In a multistage cold forging process for aluminum pipe yoke, the surface defects frequently occur due to excessive deformation or friction during extrusion process for forming hollow pipe par...
P. E. Pfeffer, M. Harrer, D. N. Johnston, 2002,?Interaction of Vehicle and Steering Ssystem Rregarding?On-centre Handling, Veh. Sys. Dyn, Vol. 46, No. 5, pp.?413~428, https://doi.org/10.1080/00423110701416519.
K. M. Kim, M. C. Kim, T. M. Hwang, S. H. Chung, M.?S. Joun, 2019, Numerical and Experimental Study on?Spring Back in Automatic Multi-Stage Precision Cold?Forging Process of a Steering Yoke, Trans. Mater.?Process., Vol. 28, No. 3, pp. 115~122.
J. D. Yoo, T. M. Hwang, M. S. Joun, 2020, Finite?Element Prediction of Temperature Variation of Material?and Dies in Aluminum Forging, Key Eng. Mater., Vol.?830, pp. 93~100, https://doi.org/10.4028/www.scientific.net/KEM.830.93.
S. G. Seong, K. H. Kim, Y. S. Lee, S. Y. Lee, E. Y.?Yoon, 2022, Die Stress Reduction Design and?Mechanical Properties Analysis of Warm Forging?Process for the Application of Warm-Closed Forging of?Automotive Steering Unit Yoke, Trans. Mater. Process.,?Vol. 31, No. 2, pp. 51~56, http://data.doi.or.kr/10.5228/KSTP.2022.31.2.51.
B. S. Han, S. H. Kim, J. H. Sin, J. P. Kim, D. O. Kim,?S. Y. Seong, 2022, Automotive Technology Trends and?Lightweight Technologies, J. Kor. Foundry Soc., Vol.?42, No. 2, pp. 97~104.
J. C. Ryu, J. H. Kim, D. H. Kam, D. C. Ko, 2022,?Feasibility of One-shot Forming for Manufacturing of?Steel/CFRP Hybrid B-piller, Mater. Manuf. Processes,?Vol. 37, No. 14, pp. 1~15, https://doi.org/10.1080/10426914.202 2.2039693.
K. M. Kim, J. D. Yoo, M. S. Jeong, 2018, Nonisothermal Analysis of an Aluminum Forging Process?fo Yoke in Room Temperature, Proc. Kor. Soc. Tech.?Plast. Conf., pp. 150~151.
C. I. Pruncu, T. T. Pham, A. Dubois, M. Dubar, L.?Dubar, 2018, Morphology of Surface Integrity as?Effect of Cold Forging of Aluminum Alloy, Tribol.?Trans., Vol. 61, No. 4, pp. 632~639,?https://doi.org/10.1080/10402004.2017.1386339.?
[10]H. Sofuoglu, H. Gidikli, J. Rasty, 2001, Determination?of Friction Coefficient by Employing the Ring?Compression Test, ASME J. Eng. Mater. Technol., Vol.?123, No. 3, pp. 338~348, https://doi.org/10.1115/1.1369601.
Scientific Forming Technologies Corporation, Columbus, OH, USA, 1992.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.