참고문헌 (17)

1. M. R. Zakaria, H. M. Akil, M. F. Omar, M. M. A. B. Abdullah, A. A. A. Rahman, and M. B. H. Othman, "Improving Flexural and Dielectric Properties of Carbon Fiber Epoxy Composite Laminates Reinforced with Carbon Nanotubes Interlayer using Electrospray Deposition", Nanotechnol. Rev., 2020, 9, 1170-1182.？ 

   상세보기

2. M. S. Islam, Y. Deng, L. Tong, S. N. Faisal, A. K. Roy, A. I. Minett, and V. G. Gomes, "Grafting Carbon Nanotubes Directly onto Carbon Fibers for Superior Mechanical Stability: Towards Next Generation Aerospace Composites and Energy Storage Applications", Carbon, 2016, 96, 701-710.？ 

   상세보기

3. B. I. Lee, S. H. Kim, and M. S. Lee, "Preparation and Physical Properties of Biodegradible Poly(L-lactide)/Silica Composites", Text. Sci. Eng., 2008, 45, 269-275.？ 

4. M. A. banilla, Y. Li, and V. M. Karbhari, "Durability Characterization of Wet Layup Graphite/Epoxy Composites Used in External Strengthening", Compos. B. Eng., 2005, 37, 200-212.？ 

   상세보기

5. B. A. Kim and C. K. Moon, "Nanoparticle Effect on Durability of Carbon Fiber/Epoxy Composites in Saline Water Environment", J. Ocean Eng. Technol., 2014, 28, 64-68.？ 

   원문보기 상세보기

6. S. R. Karnati, P. Agbo, and L. Zhang, "Applications of Silica Nanoparticles in Glass/Carbon Fiber-reinforced Epoxy Nanocomposite", Compos. Commun., 2020, 17, 32-41.？ 

   상세보기

7. J. Ha, Y. Song, Y. Joo, Z. M. Huang, J. S. Yun, and D. Lee, "Rheological Characterization of the Dispersibility of Graphene Nanoparticles in Polymer Nanocomposites", Text. Sci. Eng., 2021, 58, 17-24.？ 

   상세보기

8. C. D. Doyle, "Estimating Thermal Stability of Experimental Polymers by Empirical Thermogravimetric Analysis", Anal. Chem., 1961, 33, 77-79.？ 

   상세보기

9. S. J. Park, H. C. Kim, H. I. Lee, and D. H. Suh, "Thermal Stability of Imidized Epoxy Blends Initiated by N-benzylpyrazinium Hexafluoroantimonate Salt", Macromolecules, 2001, 34, 7573-7575.？ 

   상세보기

10. C. H. Lee and K. M. Kim, "A Study on Cure Behavior of an Epoxy/Anhydride System and Silica Filler Effects", J. Adhes. Interfac., 2009, 10, 117-126.？ 

11. X. Li, S. Shonkwiler, and S. McMains, "Detection of Resin-rich Areas for Statistical Analysis of Fiber-reinforced Polymer Composites", Compos. B. Eng., 2021, 225, 109252.？ 

12. J. H. Eun, J. W. Gwak, K. J. Kim, M. S. Kim, S. M. Sung, B. K. Choi, D. H. Kim, and J. S. Lee, "Effect of Fabricating Temperature on the Mechanical Properties of Spread Carbon Fiber Fabric Composites", Compos. Res., 2020, 33, 161-168.？ 

13. S. S. Devangamath, B. Lobo, S. P. Masti, and S. Narasagoudr, "Mechanical and Dynamic Mechanical Studies on Epoxy-cobaltous Sulfate Polymer Hybrids", Fiber. Polym., 2018, 19, 1490-1499.？ 

    상세보기

14. D. Lee and D. Kim, "Effects of Nano Silica and Siloxane on Properties of Epoxy Composites for Adhesion of Micro Electronic Device", Korean Chem. Eng. Res., 2009, 47, 332-336.？ 

15. C. H. Lee and J. J. Park, "The Properties of DSC and DMA for Epoxy Nano-and-micro Mixture Composites", Trans. Electr. Electron. Mater., 2010, 11, 69-72.？ 

    원문보기 상세보기

16. P. Yang, G. Wang, X. Xia, Y. Takezawa, H. Wang, S. Yamada, Q. Du, and W. Zhong, "Preparation and Thermo-Mechanical Properties of Heat-resistant Epoxy/Silica Hybrid Materials", Polym. Eng. Sci., 2008, 48, 1214-1221.？ 

    상세보기

17. Y. Oh, B. I. You, J. H. Ahn, and G. W. Lee, "Investigation of Mechanical and Electrical Properties of Hybrid Composites Reinforced with Carbon Nanotubes and Micrometer-sized Silica Particles", Trans. Korean Soc. Mech. Eng. A, 2016, 40, 103-1046.