최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기드라이브ㆍ컨트롤 = Journal of drive and control, v.20 no.1, 2023년, pp.27 - 33
노대경 (Korea Institute of Science and Technology Information) , 이동원 (Korea Institute of Science and Technology Information) , 김택준 (R&D center, CYSKO) , 장주섭 (Department of Mechanical Engineering, Gachon University)
From the perspective of dental chair manufacturers, it is important to of localizing hydraulic system in order to secure market competitiveness. This study aims to develop the analysis model of a dental chair which overseas companies secure core technologies. The study follows the steps below. First...
J. H. Wi "A Study on the Design Direction of the Dental Unit Chair through the Design Satisfaction", J. of Cultural Product & Design, No.51, pp.121-131, 2017.?
S. W. Son, and D. S. Chung, "A Study about Color Improvement of Unit Chair Using Functional Color", J. of Industrial Design, Vol.8, No.2, pp.1-12, 2014.?
J. O. Choi, "A Convergence Study on Waterline Management of Unit Chair in Dental Hygiene Laboratory," J. of the Korea Convergence Society, Vol. 10, No. 10, pp. 27-31, 2019.?
H. S. Yun, J. H. Park, and D. U. Jeong, "Implemetation of Waterpipe Clean Control System for Dental Clinic Unit-chair", Korea Institute of Maritime Information & Communication Sciences Spring Conference, pp. 760-761, 2011.?
H. K. Jang, "Investigation of electromagnetic wave emissions from dental unit chair", Dankook University Graduate School Master's Thesis, 2018.?
Y. H. Yoon and J. S. Jang, "SimulationX, Multi-domain Simulation and Modeling tool for the Design, Analysis, and Optimization of Complex systems", Journal of Drive and Control, Vol.9, No.1, pp.56-69, 2012.?
D. K. Noh, Y. K. Kang, J. D. Ji, J. S. Park and J. S. Jang, "Case of Developing Analysis Model for Recoil System for Automatic Gun", Journal of Korea Society for Simulation, Vol.24, No.4, pp.35-41, 2015.?
D. K. Noh, S. C. Kim, Y. J. Kim, and J. S. Jang, "Lubricant flow analysis for effective lubrication of tractor forward/reverse clutch", Heliyon, Vol.3, No.4, e00295, 2017.?
D. K. Noh, D. H. Lee, J. S. Yun, and D. W. Lee, "Development of Analysis Model and Sensitivity Analysis for High-Power Hydraulic Drifter Design", J. of the Korea Society for Simulation, Vol.27, No.2, pp.11-24, 2018.?
D. K. Noh, D. W. Lee, J. S. Lee, and J. S. Jang, "Analysis of Surplus Flow in a Hydraulic System Applied to a Self-propelled Spinach Harvester," Journal of Drive and Control, Vol. 19, No. 1, pp.26-33, 2022.?
D. K. Noh, D. W. Lee, J. S. Lee, and J. S. Jang, "Improving Hydraulic System Design by Analysis Model of a Self-propelled Spinach Harvester," Journal of Drive and Control, Vol. 19, No. 1, pp.69-75, 2022.?
FINE SINTER CATALOG & Technical Data.?
G. H. Jung, "Design of a Height Adjustable Bunker Bed Using a Gas Spring", Journal of Drive and Control, Vol. 18, No. 4, pp.19-27, 2021.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.