최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기방사선기술과학 = Journal of radiological science and technology, v.46 no.2, 2023년, pp.151 - 157
김정완 (가톨릭대학교 여의도성모병원 영상의학과) , 성열훈 (청주대학교 보건의료대학원 방사선학과)
The purpose of this study was to develop an assist device that could correct and support patient position during biopsy on computed tomography (CT) using 3D printing technology. The development method was conducted in the order of 3D design, 3D output, intermediate evaluation for product, final assi...
Kitamori H, Sumida I, Tsujimoto T, Shimamoto H,?Murakami S, Ohki M. Evaluation of mouthpiece fixation devices for head and neck radiotherapy patients fabricated in Polyjet photopolymer by a 3D?printer. Physica Medica. 2019;58:90-8.
Santos JC, Almeida CD, Iwahara A, Peixoto JE.?Charaterization and applicability of low-density?materials for making 3D physical anthropomorphic?breast phantoms. Radiation Physics and Chemistry.?2019;164:108361.
Kadoya N, Abe K, Nemoto H, Sato K, Leko Y, Ito?K, et al. Evaluation of a 3D-printed heterogeneous anthropomorphic head and neck phantom?for patient-specific quality assurance in intensitymodulated radiation therapy. Radiological Physics?and Technology. 2019;12:351-6.
Herrmann KH, GGrtner C, GGllmar D, KrGmer M,?Reichenbach JR. 3D printing of MRI compatible?components: Why every MRI research group should?have a low-budget 3D printer. Medical Engineering?& Physics. 2014;36(10):1373-80.
Iguchi T, Matsui Y, Tomita K, Uka M, Umakoshi?N, Munetomo K, Hiraki T. CT fluoroscopy-guided?biopsy of pulmonary lesions contacting theinterlobar fissure: An analysis of 72 biopsies, Diagnostic?and Interventional Imaging. 2022;103(6):302-9.
Saji H, Nakamura H, Tsuchida T, Tsuboi M, Kawate?N, Konaka C, et al. The incidence and the risk ofpneumothorax and chest tube placement after percutaneous CT-guided lungbiopsy: The angle of the?needle trajectory is a novel predictor. Chest. 2002;?121:1521-6.
Kim DG, Lee JA. Evaluation of the Efficiency of?Use of Fixation Instrumens in Computed TomographyGuided Biopsy of Lung Lesions. The Journal of the?Korea Contents Association. 2022;22(7):676-83.
Neyaz Z. Soft-Tip Stylet and Saline Instillation Technique:?Making Difficult Percutaneous CT-GuidedBiopsies?Possible. Indian Journal of Radiology & Imaging.?2021;31(4):956-60.
Lehmann S, Frank N. An Overview of Percutaneous?CT-Guided Lung Biopsies. Journal of Radiology?Nursing. 2018;37(1):2-8.
Pessis E, Campagna R, Sverzut JM, Bach F,?Rodallec M, Guerini H, et al. Virtual monochromatic spectral imaging with fast kilovoltage?switching: Reduction of metal artifacts at CT.?RadioGraphics. 2013;33(2):573-83.
Seoung YH. Effects on Changes of the Speed of Sound?and the Broadband Ultrasound Attenuation on the?Medium's Infilling in Additive Manufacturing?Method of 3D Printing. Journal of Radiological?Science and Technology. 2018;41(1):53-60.
Sugawara H, Takayanagi T, Ishikawa T, Katada Y,?Fukui R, Yamamoto Y, et al. New Fast kVp Switching?Dual-Energy CT: Reduced Severity of Beam?Hardening Artifacts and Improved Image Quality?in Reduced-Iodine Virtual Monochromatic Imaging.?Academic Radiology. 2020;27(11):1586-93.
Kim MS. Development of Patient-Immobilizing?Device for Total Body Irradiation (TBI). Korean?Society of Medical Physics. 2002;13(3):114-9.
Savi M, Andrade MAB, Potiens MPA. Commercial?filament testing for use in 3D printed phantoms.?Radiation Physics and Chemistry. 2020;174:108906.
Hong DY, Lee SW, Kim GB, Lee SM, Kim NK, Seo?JB. Development of a CT imaging phantom of anthromorphic lung using fused deposition modeling?3D printing. Medicine. 2020;99(1):e18617.
Ballard DH, Trace AP, Ali S, Hodgdon T, Zygmont?ME, DeBenedectis CM, et al. Clinical Applications of 3D Printing: Primer for the Radiologists.?Academic Radiology. 2018;25(1):52-65.
Hong DY, Lee J, Lee JH, Mun JW, Oh HS, Jeong?SH, et al. Evaluation of Usefulness and Fabrication?of Femur Phantom on Quality Control of Bone?Mineral Density Using 3D Printing Technology.?Journal of Radiological Science and Technology.?2023;46(1):1-8.
Lee JY, KIm JH, Park HH. Evaluation of the?Applicability of PET/CT Phantom as a 3D Printing?Material. Journal of Radiological Science and?Technology. 2022;45(5):423-31.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.