$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

SLM 방식으로 제작한 도재관 금속하부구조물의 변연 및 내면 적합도 평가
Evaluation of marginal and internal fit of metal copings fabricated by selective laser melting 원문보기

Journal of technologic dentistry : JTD, v.45 no.1, 2023년, pp.1 - 7  

배성령 (고려대학교 대학원 보건과학과 치의기공학전공) ,  이하빈 (고려대학교 대학원 보건과학과 치의기공학전공) ,  노미준 (고려대학교 대학원 보건과학과 치의기공학전공) ,  김지환 (고려대학교 대학원 보건과학과 치의기공학전공)

Abstract ▼ AI-Helper 아이콘AI-Helper

Purpose: To evaluate the marginal and internal fit of metal coping fabricated by a metal three-dimensional (3D) printer that uses selective laser melting (SLM). Methods: An extraoral scanner was used to scan a die of the prepared maxillary right first molar, and the coping was designed using compute...

주제어

#Dental marginal adaptation   #Dental internal fit   #Metal three-dimensional printing   #Resin three-dimensional printing   #Selective laser melting  

참고문헌 (36)

  1. Turdean GL, Craciun A, Popa D, Constantiniuc M.？Study of electrochemical corrosion of biocompatible？Co-Cr and Ni-Cr dental alloys in artificial saliva. Influence of pH of the solution. Mater Chem Phys. 2019;？233:390-398. 

    상세보기

  2. Qiu J, Yu W, Zhang F. Effects of the porcelain-fused-to-metal firing process on the surface and corrosion？of two Co-Cr dental alloys. J Mater Sci. 2011;46:1359-1368. 

    상세보기

  3. Hung SH, Hung KS, Eick JD, Chappell RP. Marginal fit？of porcelain-fused-to-metal and two types of ceramic？crown. J Prosthet Dent. 1990;63:26-31. 

  4. Leinfelder KF. Porcelain esthetics for the 21st century.？J Am Dent Assoc. 2000;131 Suppl:47S-51S. 

    상세보기

  5. Almilhatti HJ, Giampaolo ET, Vergani CE, Machado？AL, Pavarina AC. Shear bond strength of aesthetic materials bonded to Ni-Cr alloy. J Dent. 2003;31:205-211. 

  6. Johnson T, van Noort R, Stokes CW. Surface analysis of porcelain fused to metal systems. Dent Mater.？2006;22:330-337. 

    상세보기

  7. Yim JH, Shin SY. Cr-Co removable partial denture？treatment fabricated by selective laser melting: a case？report. J Dent Rehabil Appl Sci. 2021;37:39-47. 

  8. Kim DY, Jeon JH, Park JY, Kim JH, Kim HY, Kim WC.？Comparison of the marginal and internal gap of metal？coping according to processing method of dental？CAD/CAM system. J Dent Hyg Sci. 2015;15:12-17. 

  9. Khaledi AA, Farzin M, Akhlaghian M, Pardis S, Mir N.？Evaluation of the marginal fit of metal copings fabricated by using 3 different CAD-CAM techniques: milling, stereolithography, and 3D wax printer. J Prosthet？Dent. 2020;124:81-86. 

    상세보기

  10. Kim DY, Sin CH, Jung ID, Kim JH, Kim WC. Evaluation？of Marginal and Internal Gap of Cobalt-Chromium？Sintering Metal Coping Fabricated by Dental CAD/CAM System. J Dent Hyg Sci. 2015;15:536-541. 

  11. Thakare A, Ramesh S, Patil V, Meenakshi S, Ramu R,？Byakodi R. WITHDRAWN: comparative evaluation of？internal and marginal fit of interim crowns fabricated？by CAD/CAM milling and two different 3D printing？systems - an in vitro study. Mater Today Proc. 2022;57(Pt 2):A1-A9. 

  12. Frazier WE. Metal additive manufacturing: a review. J？Mater Eng Perform. 2014;23:1917-1928. 

  13. Kim HD. Application of 3D printer in dental clinic. J？Korean Acad Esthet Dent. 2018;27:82-96. 

  14. Takaichi A, Suyalatu, Nakamoto T, Joko N, Nomura？N, Tsutsumi Y, et al. Microstructures and mechanical？properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications. J？Mech Behav Biomed Mater. 2013;21:67-76. 

  15. Won S, Kang HG, Ko KH, Huh YH, Park CJ, Cho LR.？Review on additive manufacturing of dental materials.？J Dent Rehabil Appl Sci. 2021;37:1-15. 

  16. Rutkunas V, Gedrimiene A, Auskalnis L, Admakin O,？Mangano F. Accuracy of fixed implant-supported？dental prostheses additively manufactured by metal,？ceramic, or polymer: a systematic review. J Prosthodont. 2022;31(S1):70-87. 

  17. Ucar Y, Akova T, Akyil MS, Brantley WA. Internal fit？evaluation of crowns prepared using a new dental？crown fabrication technique: laser-sintered Co-Cr？crowns. J Prosthet Dent. 2009;102:253-259. 

  18. Kim J, Park JM, Kim M, Heo SJ, Shin IH, Kim M. Comparison of experience curves between two 3-dimensional intraoral scanners. J Prosthet Dent. 2016;116:221-230. 

    상세보기

  19. Jeong SJ, Cho HW, Jung JH, Kim JM, Kim YL. Comparative evaluation of marginal and internal fit of metal？copings fabricated by various CAD/CAM methods. J？Korean Acad Prosthodont. 2019;57:211-218. 

  20. Yan X, Xu YX, Wu Y, Lin H. Effects of heat treatment on metal-ceramic combination of selective-laser-melted cobalt-chromium alloy. J Prosthet Dent.？2018;120:319.e1-319.e6. 

    상세보기

  21. Hong MH, Min BK, Lee DH, Kwon TY. Marginal fit of？metal-ceramic crowns fabricated by using a casting？and two selective laser melting processes before and？after ceramic firing. J Prosthet Dent. 2019;122:475-481. 

    상세보기

  22. Kim JH. Evaluation of marginal and internal gap of？metal substructures fabricated by the state-of-the-art manufacturing technologies. Korean J Dent Mater.？2020;47:1-10. 

  23. Huang Z, Zhang L, Zhu J, Zhang X. Clinical marginal？and internal fit of metal ceramic crowns fabricated？with a selective laser melting technology. J Prosthet？Dent. 2015;113:623-627. 

    상세보기

  24. Wu M, Dong X, Qu Y, Yan J, Li N. Analysis of microstructure and fatigue of cast versus selective laser-melted dental Co-Cr alloy. J Prosthet Dent. 2022;128:218.e1-218.e7. 

    상세보기

  25. Liu W, Qing H, Pei X, Wang J. Internal adaptation of？cobalt-chromium posts fabricated by selective laser？melting technology. J Prosthet Dent. 2019;121:455-460. 

    상세보기

  26. Pyo SW, Lee JJ, Han JS, Lim YJ. Study on methodology？for the assessment of internal and marginal adaptation on fixed dental prosthesis. J Dent Rehabil Appl？Sci. 2016;32:158-168. 

  27. Quante K, Ludwig K, Kern M. Marginal and internal fit？of metal-ceramic crowns fabricated with a new laser？melting technology. Dent Mater. 2008;24:1311-1315. 

    상세보기

  28. McLean JW, von Fraunhofer JA. The estimation of cement film thickness by an in vivo technique. Br Dent J.？1971;131:107-111. 

  29. Jorgensen KD, Esbensen AL. The relationship between？the film thickness of zinc phosphate cement and？the retention of veneer crowns. Acta Odontol Scand.？1968;26:169-175. 

    상세보기

  30. Daou EE, Baba NZ. The effect of firing cycles on the？fit of cobalt-chromium multiunit prostheses fabricated？by additive manufacturing. J Prosthodont. 2023;32:71-76. 

    상세보기

  31. Zhang M, Gan N, Qian H, Jiao T. Retentive force and？fitness accuracy of cobalt-chrome alloy clasps for？removable partial denture fabricated with SLM technique. J Prosthodont Res. 2022;66:459-465. 

    상세보기

  32. Lapcevic AR, Jevremovic DP, Puskar TM, Williams？RJ, Eggbeer D. Comparative analysis of structure and？hardness of cast and direct metal laser sintering produced Co-Cr alloys used for dental devices. Rapid？Prototyp J. 2016;22:144-151. 

  33. Zhou Y, Li N, Yan J, Zeng Q. Comparative analysis？of the microstructures and mechanical properties of？Co-Cr dental alloys fabricated by different methods. J？Prosthet Dent. 2018;120:617-623. 

  34. Kruth JP, Levy G, Klocke F, Childs THC. Consolidation？phenomena in laser and powder-bed based layered？manufacturing. CIRP Ann. 2007;56:730-759. 

    상세보기

  35. Xu D, Xiang N, Wei B. The marginal fit of selective laser melting-fabricated metal crowns: an in vitro study.？J Prosthet Dent. 2014;112:1437-1440. 

    상세보기

  36. Kakinuma H, Izumita K, Yoda N, Egusa H, Sasaki？K. Comparison of the accuracy of resin-composite？crowns fabricated by three-dimensional printing and？milling methods. Dent Mater J. 2022;41:808-815. 

    상세보기

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로