$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

혈액산화용 인공폐 분리막 기술 연구동향
Membrane Technology for Artificial Lungs and Blood Oxygenators 원문보기

멤브레인 = Membrane Journal, v.33 no.2, 2023년, pp.61 - 69  

박동현 (인천대학교 에너지화학공학과) ,  (인천대학교 에너지화학공학과) ,  (인천대학교 에너지화학공학과) ,  김정 (인천대학교 에너지화학공학과)

초록
AI-Helper 아이콘AI-Helper

최근 COVID-19로 인해 증가한 급성 폐부전 중증환자 치료를 위한 인공폐 기술의 필요성이 부각되었다. 또한, 빠르게 진행되고 있는 인구고령화는 인공장기(artificial organ, AO) 기술에 대한 높은 수요를 불가피하게 만들고 있다. 분리막은폐, 신장, 간 및 췌장을 포함한 많은 AO 기기의 핵심 부품이다. 특히 인공폐(artificial lung, AL) 기술은 지난 50년간 빠르게 발전해왔지만, 장기부전 환자의 생존율은 50% 내외로 여전히 낮은 편이다. 현재 대부분의 AL 관련문헌은 임상결과에 집중되어 있으며, AL 분리막의 개발연구는 매우 부족한 편이다. 이에 대한 원인 중 하나는 AL 기술이 생명공학을 포함하여 고분자 화학분리공정 기술을 아우르는 융합적 기술개발을 요구하기 때문인 것으로 판단된다. 본 총설에서는 헬스케어산업에서 AL 분리막 기술의 역할과 기술개발이 필요한 난제들을 정리하였다. 특히, 분리막 소재의 혈액적합성, 분리성능, 모듈 디자인 및 공정 구성 측면에서 다양한 연구개발이 필요하다는 부분을 강조하고자 한다.

Abstract AI-Helper 아이콘AI-Helper

The technical importance of membrane-based artificial lung technology has been re-emphasized after the recent breakout of COVID-19 to treat acute lung-failure patients. The world population, particularly in Korea, is aging at an unprecedented rate, which can increase the demand for better artificial...

주제어

참고문헌 (31)

  1. Researchandmarkets, "Extracorporeal membrane oxygenation machine market by modality, application and region - Analysis & forecasts to 2021", (2017).? 

  2. A. A. Shah, H. J. Heo, S. Park, E. Yi, Y. Cho, S.-E. Nam, Y.-I. Park, H. Kim, E.-H. Sohn, and H. Park, "Origin of fluoropolymer affinity toward water and its impact on membrane performance", ACS Appl. Polym. Mater., 2, 5249- 5258, (2020).? 

  3. S. Kim, B. T. D. Nguyen, H. Ko, M. Kim, K. Kim, S. Nam, and J. F. Kim, "Accurate evaluation of hydrogen crossover in water electrolysis systems for wetted membranes", Int. J. Hydrogen Energy, 46, 15135-15144 (2021).? 

  4. M. G. Shin, W. Choi, J. Huh, W. D. Mulhearn, J. S. Hwang, C. M. Stafford, J. F. Kim, and J.-H. Lee, "Solvent transport model for polyamide nanofilm membranes based on accurate Hansen solubility parameters", J. Membr. Sci., 674, 121505 (2023).? 

  5. H. Y. Nguyen Thi, S. Kim, B. T. Duy Nguyen, D. Lim, S. Kumar, H. Lee, G. Szekely, and J. F. Kim, "Closing the sustainable life cycle loop of membrane technology via a cellulose biomass platform", ACS Sustain. Chem. Eng., 10, 2532-2544 (2022).? 

  6. M. Ochs, J. R. Nyengaard, A. Jung, L. Knudsen, M. Voigt, T. Wahlers, J. Richter, and H. J. G. Gundersen, "The number of alveoli in the human lung", Am. J. Respir Crit. Care Med., 169, 120- 124 (2004).? 

  7. R. Johnson and C. Hsia, "Human respiration : Anatomy and physiology, mathematical modeling, numerical simulation and applications", pp. 1-29, WIT Press, Southampton, UK (2006).? 

  8. M. C. Annesini, L. Marrelli, V. Piemonte, and L. Turchetti, "Artificial organ engineering", pp. 117-161, Springer, London, UK (2017).? 

  9. S. Goutelle, M. Maurin, F. Rougier, X. Barbaut, L. Bourguignon, M. Ducher, and P. Maire, "The Hill equation: a review of its capabilities in pharmacological modelling", Fundam. Clin. Pharmacol., 22, 633- 648 (2008).? 

  10. A. V. Hill, "The possible effects of the aggregation of the molecules of haemoglobin on its dissociation curves", J. Physiol., 40, 4-7 (1910).? 

  11. T. Des Jardins, "Cardiopulmonary anatomy & physiology: Essentials of respiratory care", pp. 3-76, Delmar, New York, USA (2012).? 

  12. K. Tsakiridis, A. Mpakas, G. Kesisis, S. Arikas, M. Argyriou, S. Siminelakis, P. Zarogoulidis, N. Katsikogiannis, I. Kougioumtzi, and T. Tsiouda, "Lung inflammatory response syndrome after cardiac-operations and treatment of lornoxicam", J. Thorac. Dis., 6, S78 (2014).? 

  13. S. Dimitrios, "Biomedical membranes and (bio) artificial organs 2", pp. 83-104, World Scientific, Singapore (2017).? 

  14. K. Nagase, F. Kohori, and K. Sakai, "Oxygen transfer performance of a membrane oxygenator composed of crossed and parallel hollow fibers", Biochem. Eng. J., 24, 105-113 (2005).? 

  15. T. K. Poddar, S. Majumdar, and K. K. Sirkar, "Removal of VOCs from air by membrane-based absorption and stripping", J. Membr. Sci., 120, 221-237, (1996).? 

  16. A. Mansourizadeh, I. Rezaei, W. J. Lau, M. Q. Seah, and A. F. Ismail, "A review on recent progress in environmental applications of membrane contactor technology", J. Environ. Chem. Eng., 10, 107631 (2022).? 

  17. K. W. Low, R. Van Loon, S. A. Rolland, and J. Sienz, "Formulation of generalized mass transfer correlations for blood oxygenator design", J. Biomech. Eng., 139, 031007 (2017).? 

  18. S. Wickramasinghe, A. Goerke, J. Garcia, and B. Han, "Designing blood oxygenators", Ann. N. Y. Acad. Sci., 984, 502-514 (2003).? 

  19. N. Matsuda and K. Sakai, "Blood flow and oxygen transfer rate of an outside blood flow membrane oxygenator", J. Membr. Sci., 170, 153-158 (2000).? 

  20. J. R. Zierenberg, H. Fujioka, K. E. Cook, and J. B. Grotberg, "Pulsatile flow and oxygen transport past cylindrical fiber arrays for an artificial lung: Computational and experimental studies", J. Biomech. Eng., 130, 031019 (2008).? 

  21. B. P. N. Thi, B. T. D. Nguyen, I.-S. Jeong, and J. F. Kim, "Hemocompatibility challenge of membrane oxygenator for artificial lung technology", Acta Biomater., 152, 19-46 (2022).? 

  22. W. J. Federspiel and K. A. Henchir, "Lung, artificial: basic principles and current applications", Encyclopedia of Biomaterials and Biomedical Engineering, pp. 910-921, CRC Press, Boca Raton, (2008).? 

  23. J. A. Awad, R. Cloutier, L. Fournier, D. Major, L. Martin, M. Masson, and R. Guidoin, "Pumpless respiratory assistance using a membrane oxygenator as an artificial placenta: a preliminary study in newborn and preterm lambs", J. Invest. Surg., 8, 21-30 (1995).? 

  24. F. Wieses, D. Paul, W. Possart, G. Malsch, and E. Bossin, "Grenzflauchenenergie gequollener Polymermembranen", Acta Polym., 41, 95-98 (1990).? 

  25. F. Wiese, "Membranes for artificial lungs", Membranes for the Life Sciences, 1, pp. 49-68, New York, USA (2007).? 

  26. N. G. LaFayette, R. E. Schewe, J. P. Montoya, and K. E. Cook, "Performance of a MedArray silicone hollow fiber oxygenator", ASAIO J., 55, 382- 387 (2009).? 

  27. E. Khoshbin, N. Roberts, C. Harvey, D. Machin, H. Killer, G. J. Peek, A. W. Sosnowski, and R. K. Firmin, "Poly-methyl pentene oxygenators have improved gas exchange capability and reduced transfusion requirements in adult extracorporeal membrane oxygenation", ASAIO J., 51, 281-287 (2005).? 

  28. J. M. Toomasian, R. J. Schreiner, D. E. Meyer, M. E. Schmidt, S. E. Hagan, G. W. Griffith, R. H. Bartlett, and K. E. Cook, "A polymethylpentene fiber gas exchanger for long-term extracorporeal life support", ASAIO J., 51, 390-397 (2005).? 

  29. J. F. Kim, J. H. Kim, Y. M. Lee, and E. Drioli, "Thermally induced phase separation and electrospinning methods for emerging membrane applications: A review", AIChE J., 62, 461-490 (2016).? 

  30. A. Park, Y. Song, E. Yi, B. T. Duy Nguyen, D. Han, E. Sohn, Y. Park, J. Jung, Y. M. Lee, and Y. H. Cho, "Blood Oxygenation Using FluoropolymerBased Artificial Lung Membranes", ACS Biomater. Sci. Eng., 6, 6424-6434 (2020).? 

  31. B. T. Duy Nguyen, H. Y. Nguyen Thi, B. P. Nguyen Thi, D.-K. Kang, and J. F. Kim, "The roles of membrane technology in artificial organs: current challenges and perspectives", Membranes, 11, 239 (2021). 

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로