$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

PES 여과막의 물리적 막오염 개선을 위한 기공 구조 개선 연구
Improving Physical Fouling Tolerance of PES Filtration Membranes by Using Double-layer Casting Methods 원문보기

멤브레인 = Membrane Journal, v.33 no.4, 2023년, pp.191 - 200  

김창헌 (한국화학연구원 화학공정연구본부 그린탄소연구센터) ,  유영민 (한국화학연구원 화학공정연구본부 그린탄소연구센터) ,  김인철 (한국화학연구원 화학공정연구본부 그린탄소연구센터) ,  남승은 (한국화학연구원 화학공정연구본부 그린탄소연구센터) ,  이정현 (고려대학교 화공생명공학과) ,  백영빈 (인하대학교 생명공학과) ,  조영훈 (한국화학연구원 화학공정연구본부 그린탄소연구센터)

초록
AI-Helper 아이콘AI-Helper

Polyethersulfone (PES)은 친수성과 상분리법의 용이성 덕분에 수처리 및 정제 분야에서 정밀여과한외여과막 소재로 일반적으로 사용된다. 그러나, 비용매 유도 상분리법으로 제조된 PES 분리막, 특히 지지체가 없는 여과막의 경우 도프의 조성과 기재의 특성에 따라 여과막 하부에 낮은 기공도를 갖는 치밀층이 형성되기 쉽고, 이러한 치밀층으로 인해 수투과 저항이 증가하고 오염물질의 쌓임에 의한 막오염이 일어난다. 본 연구에서는 PES 여과막 제조 시 상전이 과정의 수축으로 인해 분리막 하부에 물이 침투하여 치밀층을 형성, 심각한 막오염을 유발할 수 있음을 확인하였다. 동일한 선택층을 갖는 PES 여과막을 단일층 및 이중층 캐스팅법으로 각각 제조하여 하부 치밀층이 여과막의 투과성능 및 막오염에 미치는 영향을 파악하고자 하였다. 하부 치밀층이 없는 이중층 캐스팅된 여과막은 기존 여과막 대비 높은 투과성능 및 막오염에 대한 저항성을 보였으며, 이를 통해 다공성 여과막의 내오염성을 향상시키기 위한 표면 기공도 및 기공 구조 등 물리적 구조의 최적화가 중요함을 확인하였다.

Abstract AI-Helper 아이콘AI-Helper

Polyethersulfone (PES) is a widely employed membrane material for water and industrial purification applications owing to its hydrophilicity and ease of phase separation. However, PES membranes and filters prepared using the nonsolvent induced phase separation method often encounter significant flux...

주제어

참고문헌 (41)

  1. H. H. Aung, R. Patel, and J. H. Kim, "Review on?antifouling membranes with surface- patterning for?water purification", Membr. J., 31, 161-169 (2021). 

  2. M. Kim, S. Kim, S. Kim, H. Lee, and J. F. Kim,?"Effect of nonwoven support during fabrication of?flat sheet membranes via phase inversion method",?Membr. J., 32, 109-115 (2022). 

  3. P. van de Witte, P. J. Dijkstra, J. W. A. van den?Berg, and J. Feijen, "Phase separation processes in?polymer solutions in relation to membrane formation", J. Membr. Sci., 117, 1-31 (1996). 

  4. N. Ismail, A. Venault, J.-P. Mikkola, D. Bouyer,?E. Drioli, and N. Tavajohi Hassan Kiadeh,?"Investigating the potential of membranes formed?by the vapor induced phase separation process", J.?Membr. Sci., 597, 117601 (2020). 

  5. X. Wang, D. Chen, T. He, Y. Zhou, L. Tian, Z.?Wang, and Z. Cui, "Preparation of lateral flow pvdf?membrane via combined vapor- and non-solvent-induced phase separation (V-NIPS)", Membranes,?13, 91 (2023). 

  6. C.-K. Yeom, J. Kim, H. Park, S. E. Park, K. Y.?Lee, and K.-H. Lee, "Formation of mesoporous?membrane by reverse thermally induced phase separation (RTIPS) process using flash freezing",?Membr. J., 31, 67-79 (2021). 

  7. A. Dehban, F. Hosseini Saeedavi, and A. Kargari,?"A study on the mechanism of pore formation?through VIPS-NIPS technique for membrane fabrication", J. Ind. Eng. Chem., 108, 54-71 (2022). 

  8. E. Yi, H. S. Kang, S. M. Lim, H. J. Heo, D. Han,?J. F. Kim, A. Park, D. H. Choi, Y.-I. Park, H. Park,?Y. H. Cho, and E.-H. Sohn, "Superamphiphobic?blood-repellent surface modification of porous fluoropolymer membranes for blood oxygenation applications", J. Membr. Sci., 648, 120363 (2022). 

  9. K. K. Chen, W. Salim, Y. Han, D. Wu, and W. S.?W. Ho, "Fabrication and scale-up of multi-leaf spiral-wound membrane modules for CO2 capture?from flue gas", J. Membr. Sci., 595, 117504 (2020). 

  10. S. J. Moon, Y. J. Kim, and J. H. Kim, "Tutorial?review on membrane classification and preparation?methods", Membr. J., 32, 198-208 (2022). 

  11. D. H. Choi, S. Kwon, Y. Yoo, I.-C. Kim, H. Park,?Y.-I. Park, S. Y. Yang, S.-E. Nam, and Y. H.?Cho, "Isoporous polyvinylidene fluoride membranes with selective skin layers via a thermal-vapor assisted phase separation method for industrial purification applications", Membranes, 12,?250 (2022). 

  12. J. T. Jung, H. H. Wang, J. F. Kim, J. Lee, J. S.?Kim, E. Drioli, and Y. M. Lee, "Tailoring non-solvent-thermally induced phase separation (N-TIPS)?effect using triple spinneret to fabricate high performance PVDF hollow fiber membranes", J.?Membr. Sci., 559, 117-126 (2018). 

  13. R. Li, P. Lyu, L. Xia, X. Li, C. Zhang, X. Liu,?and W. Xu, "Tuning surface texture of thermoplastic polyurethane/silk fibroin composites by?phase separation method", Compos. Commun., 29,?101039 (2022). 

  14. P. Radovanovic, S. W. Thiel, and S.-T. Hwang,?"Formation of asymmetric polysulfone membranes?by immersion precipitation. Part I. Modelling mass?transport during gelation", J. Membr. Sci., 65,?213-229 (1992). 

  15. H. Susanto, N. Stahra, and M. Ulbricht, "High performance polyethersulfone microfiltration membranes having high flux and stable hydrophilic?property", J. Membr. Sci., 342, 153-164 (2009). 

  16. Y. J. Song, J. H. Kim, Y. S. Kim, S. D. Kim, Y.?H. Cho, H. Park, S.-E. Nam, Y.-I. Park, E.-H.?Sohn, and J. F. Kim, "Controlling the morphology?of polyvinylidene-co-hexafluoropropylene (PVDF-co-HFP) membranes via phase inversion method",?Membr. J., 28, 187-195 (2018). 

  17. R. Thomas, E. Guillen-Burrieza, and H. A. Arafat,?"Pore structure control of PVDF membranes using?a 2-stage coagulation bath phase inversion process?for application in membrane distillation (MD)", J.?Membr. Sci., 452, 470-480 (2014). 

  18. C. Zhao, J. Xue, F. Ran, and S. Sun, "Modification?of polyethersulfone membranes - A review of?methods", Prog. Mater. Sci., 58, 76-150 (2013). 

  19. L. Zverina, M. Koch, M. F. Andersen, M. Pinelo,?J. M. Woodley, and A. E. Daugaard, "Controlled?pore collapse to increase solute rejection of modified?PES membranes", J. Membr. Sci., 595, 117515?(2020). 

  20. E. Fontananova, J. C. Jansen, A. Cristiano, E.?Curcio, and E. Drioli, "Effect of additives in the?casting solution on the formation of PVDF membranes", Desalination, 192, 190-197 (2006). 

  21. A. Hamraoui and T. Nylander, "Analytical approach for the Lucas-Washburn equation", J.?Colloid Interface Sci., 250, 415-421 (2002). 

  22. L. R. Fisher and P. D. Lark, "An experimental?study of the washburn equation for liquid flow in?very fine capillaries", J. Colloid Interface Sci., 69,?486-492 (1979). 

  23. M. Xiao, F. Yang, S. Im, D. S. Dlamini, D.?Jassby, S. Mahendra, R. Honda, and E. M. V.?Hoek, "Characterizing surface porosity of porous?membranes via contact angle measurements", J.?Membr. Sci. Lett., 2, 100022 (2022). 

  24. F. A. AlMarzooqi, M. R. Bilad, B. Mansoor, and?H. A. Arafat, "A comparative study of image analysis and porometry techniques for characterization?of porous membranes", J. Mater. Sci., 51, 2017-2032 (2016). 

  25. P. van der Marel, A. Zwijnenburg, A. Kemperman,?M. Wessling, H. Temmink, and W. van der Meer,?"Influence of membrane properties on fouling in?submerged membrane bioreactors", J. Membr. Sci.,?348, 66-74 (2010). 

  26. N. Arora and R. H. Davis, "Yeast cake layers as?secondary membranes in dead-end microfiltration?of bovine serum albumin", J. Membr. Sci., 92,?247-256 (1994). 

  27. A. G. Fane, C. J. D. Fell, and A. G. Waters, "The?relationship between membrane surface pore characteristics and flux for ultrafiltration membranes",?J. Membr. Sci., 9, 245-262 (1981). 

  28. C.-C. Ho and A. L. Zydney, "Effect of membrane?morphology on the initial rate of protein fouling?during microfiltration", J. Membr. Sci., 155, 261-275 (1999). 

  29. G. B. van den Berg and C. A. Smolders,?"Concentration polarization phenomena during?dead-end ultrafiltration of protein mixtures. The influence of solute-solute interactions", J. Membr.?Sci., 47, 1-24 (1989). 

  30. J. Hermia, "Blocking filtration. Application to non-ewtonian fluids", pp 83-89, Springer Netherlands?(1985). 

  31. M. C. V. Vela, S. A. Blanco, J. L. Garcia, and E.?B. Rodriguez, "Analysis of membrane pore blocking models applied to the ultrafiltration of PEG",?Sep. Purif. Technol., 62, 489-498 (2008). 

  32. M. C. Vincent Vela, S. Alvarez Blanco, J. Lora?Garcia, and E. Bergantinos Rodriguez, "Analysis?of membrane pore blocking models adapted to?crossflow ultrafiltration in the ultrafiltration of?PEG", Chem. Eng. J., 149, 232-241 (2009). 

  33. A. Y. Kirschner, Y.-H. Cheng, D. R. Paul, R. W.?Field, and B. D. Freeman, "Fouling mechanisms in?constant flux crossflow ultrafiltration", J. Membr.?Sci., 574, 65-75 (2019). 

  34. M.-J. Corbaton-Baguena, S. Alvarez-Blanco, and?M.-C. Vincent-Vela, "Fouling mechanisms of ultrafiltration membranes fouled with whey model solutions", Desalination, 360, 87-96 (2015). 

  35. S. Heidari, M. Amirinejad, and H. Jahangirian,?"Investigation of fouling mechanisms using surface?morphology and physicochemical membrane features", Chem. Eng. Technol., 42, 1310-1320 (2019). 

  36. I. A. Khan, Y.-S. Lee, and J.-O. Kim, "A comparison of variations in blocking mechanisms of mem-brane-fouling models for estimating flux during?water treatment", Chemosphere, 259, 127328 (2020). 

  37. D. Suh, H. Jin, H. Park, C. Lee, Y. H. Cho, and?Y. Baek, "Effect of protein fouling on filtrate flux?and virus breakthrough behaviors during virus filtration process", Biotechnol. Bioeng., 120, 1891-1901 (2023). 

  38. Y.-J. Kim and K.-H. Youm, "Analysis of membrane fouling reduction by natural convection instability flow in membrane filtration of protein solution using blocking filtration model", Membr. J.,?29, 18-29 (2019). 

  39. S. R. Wickramasinghe, E. D. Stump, D. L. Grzenia,?S. M. Husson, and J. Pellegrino, "Understanding?virus filtration membrane performance", J. Mater.?Sci., 365, 160-169 (2010). 

  40. V. Hoseinpour, A. Ghaee, V. Vatanpour, and N.?Ghaemi, "Surface modification of PES membrane?via aminolysis and immobilization of carboxymethylcellulose and sulphated carboxymethylcellulose?for hemodialysis", Carbohydr. Polym., 188, 37-47?(2018). 

  41. M. Irfan and A. Idris, "Overview of PES biocompatible/hemodialysis membranes: PES-blood interactions and modification techniques", Mater. Sci.?Eng. C., 56, 574-592 (2015). 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로