최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of Korean Tunnelling and Underground Space Association = 한국터널지하공간학회논문집, v.25 no.5, 2023년, pp.357 - 371
조선아 (한전전력연구원 송변전연구소 구조건설연구실) , 정주환 (한전전력연구원 송변전연구소 구조건설연구실) , 류희환 (한전전력연구원 송변전연구소 구조건설연구실) , 박준식 (부산대학교 사회환경시스템공학과) , 오태민 (부산대학교 사회환경시스템공학과)
In cable tunnel construction using TBM, the vertical shaft is an essential structure for entrance and exit of TBM equipment and power lines. Since a shaft penetrates the ground vertically, it often encounters rock mass. Blasting or rock splitting methods, which are mainly used to the rock excavation...
AASHTO (1996), Standard Specifications for Highway Bridges, 16th Edition, American Association of State Highway and Transportation Officials, Washington, DC, pp. 62-63.?
Herrenknecht Home page, http://www.herrenknecht.com/en/products/productdetail/vertical-shaft-sinking-machine-vsm/ (July 24, 2023).?
Kim, J.G., Park, T.D. (2003), "A study on the driving performance of the microtunneling machine with a rotating water jet cutterhead", Proceedings of the Korea Institute of Information and Telecommunication Facilities Engineering Summer Conference, Chuncheon, pp. 367-372.?
Kim, Y.G. (2020), "Roadheader solution in urban tunneling", Geotechnical Engineering, Vol. 36, No. 2, pp. 6-16.?
Kulhawy, F.H., Goodman, R.E. (1987), Foundations in Rock, Chapter 55 In Ground Engineer's Reference Book, F.G. Bell, ed., Butterworths, London, pp. 1-13.?
Liu, S., Cui, S., Li, H., Zhou, F., Xu, B., Hu, Y. (2022), "Impact characteristics of rock breaking using a conical pick assisted with abrasive slurry jet", Engineering Fracture Mechanics, Vol. 271, 108647.?
Liu, S., Li, H., Chang, H. (2017), "Drilling performance of rock drill by high-pressure water jet under different configuration modes", Shock and Vibration, Vol. 2017, 5413823, pp. 1-14.?
Luo, X., Zhang, J., Yang, F., He, F., Xia, Y. (2023), "Research on the hard rock cutting characteristics of disc cutter under front-mounted water jet precutting kerf conditions", Engineering Fracture Mechanics, Vol. 287, 109330.?
Ocak, I., Bilgin, N. (2010), "Comparative studies on the performance of a roadheader, impact hammer and drilling and blasting method in the excavation of metro station tunnels in Istanbul", Tunnelling and Underground Space Technology, Vol. 25, No. 2, pp. 181-187.?
Oh, T.M., Cho, G.C. (2014), "Characterization of effective parameters in abrasive waterjet rock cutting", Rock Mechanics and Rock Engineering, Vol. 47, pp. 745-756.?
Oh, T.M., Cho, G.C., Ji, I.T. (2013), "Effects of free surface using waterjet cutting for rock blasting excavation", Journal of Korean Tunnelling and Underground Space Association, Vol. 15, No. 1, pp. 49-57.?
Oh, T.M., Joo, G.W., Cha, Y., Cho, G.C. (2019a), "Effect of garnet characteristics on abrasive waterjet cutting of hard granite rock", Advances in Civil Engineering, Vol. 2019, 5732649, pp. 1-12.?
Oh, T.M., Joo, G.W., Cho, G.C. (2019b), "Effect of abrasive feed rate on rock cutting performance of abrasive waterjet", Rock Mechanics and Rock Engineering, Vol. 52, pp. 3431-3442.?
Oh, T.M., Park, E.S., Cheon, D.S., Cho, G.C., Joo, G.W. (2015), "A review of the effects of rock properties on waterjet rock cutting performance", Journal of Korean Tunnelling and Underground Space Association, Vol. 17, No. 5, pp. 533-551.?
Plinninger, R.J. (2008), "Abrasiveness assessment for hard rock drilling", Geomechanics and Tunnelling, Vol. 1, No. 1, pp. 38-46.?
Shin, J.H., Moon, H.K., Choi, K.C., Kim, T.K. (2009), "Evaluation of the blast-restriction zone to secure tunnel lining safety", Journal of Korean Tunnelling and Underground Space Association, Vol. 11, No. 1, pp. 85-95.?
Thuro, K.P.R.J., Plinninger, R.J. (1999), "Roadheader excavation performance-geological and geotechnical influences", Proceedings of the 9th ISRM Congress, Paris, pp. 1241-1244.?
Zhang, J., Li, Y., Zhang, Y., Yang, F., Liang, C., Tan, S. (2020), "Using a high-pressure water jet-assisted tunnel boring machine to break rock", Advances in Mechanical Engineering, Vol. 12, No. 10, pp. 1-16.?
Zhang, L. (2010), "Estimating the strength of jointed rock masses", Rock Mechanics and Rock Engineering, Vol. 43, pp. 391-402.?
Zhang, X., Hu, D., Li, J., Pan, J., Xia, Y., Tian, Y. (2021), "Investigation of rock breaking mechanism with TBM hob under traditional and free-face condition", Engineering Fracture Mechanics, Vol. 242, 107432.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.