최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.27 no.5, 2023년, pp.9 - 15
서은아 (한국건설기술연구원 구조연구본부) , 이호재 (한국건설기술연구원 구조연구본부)
In this study, the lamination performance and strength characteristics of cement-based composite materials according to the laminated specimens manufacturing method were analyzed. As a result of evaluating the buildability according to the layer height, the highest dimensional stability was shown wh...
AC509. (2019), 3D Automated Construction Technology for 3D?Concrete Walls, ICC Evaluation Service.
ASTM Standard C39. (2012), Standard Test Method for?Compressive Strength of Cylindrical Concrete Specimens, ASTM?Standard International.
Feng, P., Meng, X., Chen, J. F., and Ye, L. (2015), Mechanical?properties of structures 3D printed with cementitious powders,?Construction and Building Materials, 93, 486-497.
Lee, H. J., Kim, J. H., Moon, J. H., Kim, W. W., and Seo, E. A.?(2019), Correlation between pore characteristics and tensile bond?strength of additive manufactured mortar using X-ray computed?tomography, Construction & Building Materials, 226, 712-720.
Lee, H. J., Kim, J. H. J., Moon, J. H., Kim, W. W., and Seo, E. A.?(2020), Experimental analysis on rheological properties for?control of concrete extrudability, Advances in Concrete?Construction, 9(1), 93-102.
Lee, H. J., Seo, E. A., Kim, W. W., Yang, J. M., and Moon, J. H.?(2021), X-ray CT analysis of the cross-section of a 3D-printed?deformed layer, Materials, 14(24), 7764.
Le, T. T., Austin., S. A. Lim, S., Buswell, R. A., Gibb, A. G. F., and?Thorpe, T. (2012), Mix design and fresh properties for?high-performance printing concrete, Materials and Structures,?45(8), 1221-1232.
Murcia, D. H., Geneeby, M., and Taha M. R. (2020), Examining?the significance of infill printing pattern on the anisotropy of 3D?printed concrete, Construction and Building Materials, 262, 1-14.
Shakor, P., Sanjayan, J., Nazari, A., and Nejadi, S. (2017),?Modified 3D printed powder to cement-based material and?mechanical properties of cement scaffold used in 3D printing,?Construction and Building Materials, 138, 398-409.
Seo, E. A., Lee, H. J., and Yang, K. H. (2021), Strength?Characteristics of 3D Printed Composite Materials According to?Lamination Patterns, Journal of the Korea Institute for Structural?Maintenance and Inspection, 25(6), 193-198 (in Korean).
Seo, E. A., Lee, H. J., and Yang, K. H. (2022), Evaluation of?Fluidity Over Time and Mechanical Properties of Cement-based?Composite Materials for 3D Printing, Journal of the Korea?Institute for Structural Maintenance and Inspection, 26(4), 73-80?(in Korean).
Seo, E. A., Kim, W. W., Kim, S. W., Kwon, H. K., and Lee, H. J.?(2023), Mechanical properties of 3D printed concrete with coarse?aggregates and polypropylene fiber in the air and underwater?environment, Construction and Building Materials, 378, 131184.
Seo, J. S., Lee, B. C., and Kim, Y. Y. (2019), The Effects of Void?Ratio on Extrudability and Buildability of Cement-based?Composites Produced by 3D Printers, Journal of the Korea?Institute for Structural Maintenance and Inspection, 23(7),?104-112 (in Korean).
Won, H. J. (2021), Strength characteristics of 3D printed concrete?according to the stacking direction, Journal of the Korea?Academia-Industrial Cooperation Society, 22(2), 632-637 (in?Korean).
KCI-CT115, (2021), Standard Method of Making Compressive?Strength Specimens of Underwater Additive Layering Concrete,?Standards of the Korean Concrete Society (in Korean).
Zhang, Y., Zhang, Y., Liu, G., Yang, Y., Wu, M., and Pang, B.?(2018), Fresh properties of a novel 3D printing concrete ink,?Construction and Building Materials, 174, 263-271.?
※ AI-Helper는 부적절한 답변을 할 수 있습니다.