최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전자통신학회 논문지 = The Journal of the Korea Institute of Electronic Communication Sciences, v.18 no.5, 2023년, pp.827 - 834
이현장 (대림대학교 전기공학과) , 정희석 (대림대학교 보건의료공학과) , 조선호 (대림대학교 전기공학과)
In this paper, a slotless outer rotor BLDC motor for a vehicle blower was designed and manufactured to improve the disadvantages of general motors. The proposed motor solves the noise caused by mechanical friction of DC motor during rotation by removing the brush, Also, slotless air-gap windings are...
G Lee, J Jeong, K Lee, S Yoon, and S Park, "Study on Range and Energy Consumption Efficiency of Electric Passenger Vehicle under Real-Road Driving Conditions," Transaction of the Korean Society of Automotive Engineers, vol. 31, no. 5, May 2023, pp. 361-369.?
H Song, "Introduction to International Discussion on Automotive LCA and Life Cycle Assessment of Greenhouse Gas Emissions of Passenger Vehicle in 2030," Journal of the Korean Society of Automotive Engineers, vol. 45, no. 5, May 2023, pp. 39-42.?
G. Lee, W. Lee, and G Kim, "The Design of Radial Magnetic Force Equilibrium for Reduction of Vibration in IPM Type BLDC Motor," The transactions of The Korean Institute of Electrical Engineers, vol. 65, no. 2, Feb. 2016, pp. 298-303.?
D. Kim, S. Lee, and D. Yoon, "A Study on the Electromagnetic Noise Reduction of BLDC Motor for Fuel Pump of Vehicles," The transactions of The Korean Institute of Electrical Engineers, vol. 68, no. 2, Feb. 2019, pp. 277-284.?
B. Kim, J. Seen Yun, G. Shin, G. Min, and J. Chung, "Noise Reduction of an In-wheel Motor System for an Electric Vehicle," Transactions of the Korean Society for Noise and Vibration Engineering, vol. 29, no. 3, June 2019, pp. 422-428.?
C. Woong, "Development of Domestic Standardization in Smart Factory and Manufacturing Data," The Journal of The Korea Institute of Electronic Communication Sciences, vol. 16, no. 5, Oct. 2021 pp. 783-788.?
K. Seo, S. Jung, and C. Lee, "Topology Design of BLDC Motor for Cogging Torque Reduction and Characteristic Analysis," The transactions of The Korean Institute of Electrical Engineers, vol. 63, no. 11, Nov. 2014, pp. 1519-1525.?
B. Byeon, E. Park and Y. Kim, "Harmonic Reduction of Synchronous Generator by Permanent Magnet Shape Deformation," The Journal of The Korea Institute of Electronic Communication Sciences, vol. 17, no. 6, Dec. 2022 pp. 1081-1088.?
S. Baek, "A study on energy conversion through torque control of IPMSM in EV powertrain," The Journal of The Korea Institute of Electronic Communication Sciences, vol. 16, no. 5, Oct. 2021 pp. 845-850.?
Y. Choi, E. Han, and C. Lee, "Development Process and Technology Trend of Permanent Magnet Motor System for Electric Vehicle," Journal of the Korean Magnetics Society, vol. 31, no. 3, June 2021, pp. 97-108.?
H. Lee, "A Study on the Design and Manufacture of HVAC Double Cylinder Motor for a Car Blower", Master's Thesis, Korea University of Technology and Education School of Information Technology, 2008.?
J Jung, B Lee, and D. Ahn, "Electromagnetic Field Analysis of Distributed Winding Permanent Magnet Synchronous Motor Considering Axial Leakage Flux using Two-Dimensional Finite-Element," Analysis.Journal of Magnetics, vol. 27, no. 4, Dec. 2022, pp. 379-387.?
D. Lim and S. Kim, "Thermal Characteristics of Oil-cooled In-wheel Motor in Electric Vehicles," Transaction of the Korean Society of Automotive Engineers, vol. 22, no. 5, July 2014, pp. 29-34.?
J. Chang, "Theoretische und experimentelle Unter suchungen an einem elektronisch kommutierten Gleichstrom-Dopplelzylinderlaufermotor," PHD's Thesis, TU Berlin 1984.?
C. Park, "Theoretische und experimentelle Untersuchungen an einem elektronisch kommutierten Scheibenlaufer-Kleinmotor," PHD's Thesis, TU Berlin 1989.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.