$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

기존 임시의치와 디지털 안궁이전을 이용하여 상하악 CAD-CAM 총의치 수복 증례
Fabrication of CAD-CAM complete denture using existing provisional denture and digital facebow transfer 원문보기

대한치과보철학회지 = The journal of Korean academy of prosthodontics, v.61 no.4, 2023년, pp.268 - 274  

노재혁 (전남대학교 치의학전문대학원 보철학교실) ,  방혜민 (전남대학교 치의학전문대학원 보철학교실) ,  박상원 (전남대학교 치의학전문대학원 보철학교실) ,  임현필 (전남대학교 치의학전문대학원 보철학교실) ,  윤귀덕 (전남대학교 치의학전문대학원 보철학교실) ,  박찬 (전남대학교 치의학전문대학원 보철학교실)

초록
AI-Helper 아이콘AI-Helper

본 증례는 요양병원에 입원치료 중인 환자에서 치과에 내원하기 힘든 점과 의치 분실이 많은 점을 고려하여 내원 횟수를 감소시키고 재제작이 쉬운 CAD-CAM 총의치를 제작하였다. 환자가 적응한 기존 임시의치의 형태 및 수직고경, 악간관계를 최종의치 제작에 반영하기 위해 기존 임시의치를 스캔하고 프린팅한 개인트레이로 폐구인상을 채득하였다. UTS CAD를 이용하여 디지털 안궁이전하고 CAD 소프트웨어에서 치아배열 후 상하악 총의치를 단일 구조의 디스크로 의치상과 인공치를 한번에 절삭하여 제작하였다.

Abstract AI-Helper 아이콘AI-Helper

In this case, a CAD-CAM complete denture that can be easily remanufactured and reduced the number of visits was decided in consideration of the fact that it was difficult to visit the dental hospital and many existing dentures were lost because the patient was inpatient in a nursing hospital. In ord...

주제어

참고문헌 (9)

  1. Boucher CO. A critical analysis of mid-century impression techniques for full dentures. J Prosthet Dent 1951;1:472-91.? 

  2. Abe J. Difference of preliminary impression takings between conventional mandibular complete denture and the mandibular complete denture intended with effective suction. Pract Prosthodont 2010;43:510-24.? 

  3. Critchlow SB, Ellis JS. Prognostic indicators for conventional complete denture therapy: a review of the literature. J Dent 2010;38:2-9.? 

  4. Pacquet W, Benoit A, Hatege-Kimana C, Wulfman C. Mechanical properties of CAD/CAM denture base resins. Int J Prosthodont 2019;32:104-6.? 

  5. Inoue N, Scialabba R, Lee JD, Lee SJ. A comparison of virtually mounted dental casts from traditional facebow records, average values, and 3D facial scans. J Prosthet Dent 2022:S0022-3913(22)00146-9.? 

  6. Soo S, Cheng AC. Complete denture copy technique-A practical application. Singapore Dent J 2014;35:65-70.? 

  7. Hazeveld A, Huddleston Slater JJ, Ren Y. Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniques. Am J Orthod Dentofacial Orthop 2014;145:108-15.? 

  8. Park JH, Lee GH, Moon DN, Kim JC, Park M, Lee KM. A digital approach to the evaluation of mandibular position by using a virtual articulator. J Prosthet Dent 2021;125:849-53.? 

  9. Sun A, Yang Y, Gao H, Lin WS, Chen L, Tan J. Integrating facial and intraoral scans for digital esthetic and occlusal design: a technical report. J Prosthodont 2021;30:729-33. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로