최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기드라이브ㆍ컨트롤 = Journal of drive and control, v.20 no.4, 2023년, pp.133 - 139
정황훈 (Intelligent Control Lab., Korea Construction Equipment Technology Institute) , 신영일 (Intelligent Control Lab., Korea Construction Equipment Technology Institute) , 이진호 (Intelligent Control Lab., Korea Construction Equipment Technology Institute) , 조기용 (Intelligent Control Lab., Korea Construction Equipment Technology Institute)
A weighing system calculates the bucket's excavation amount of an excavator. Usually, the excavation amount is computed by the excavator's motion equations with sensing data. But these motion equations have computing errors that are induced by assumptions to the linear systems and identification of ...
K. W. Park, Y. J. Park and G. B. Jang, "Deep Learning-based Excavation Weighing System with Mitigated Driver Bias", KSAE Spring Conference Proceedings, pp.1210-1215, 2023?
M. S. Lee, Y. I. Shin, S. J. Choi, J. W. Kwon and K. Y. Choi, "Development of Load Weighing Algorithm for Excavator", KSAE Annual Conference Proceedings, pp.123-456, 2011.?
M. K. Seo, H. Y. Shin, H. Y. Lee, J. I. Ko and E. Tumrnjargal, "Development of Onboard Scales to Measure the Weight of Trucks", J. of Drive and Control, Vol.18, No.1, pp.9-16, 2021.?
D. Y. Shin, "A Study on Excavation Path Design of Excavator Considering Motion Limits", J. of Drive and Control, Vol.18, No.2, pp.20-31, 2021.?
J. Cho, S. Na, M. Kim and M. Park, "Development of a Workload Index for Monitoring Durability Test of an Excavator", J. of Drive and Control, Vol.19, No.4, pp.29-35, 2022.?
Caterpillar, Cat Payload for Excavator, https://www.cat.com/en_US/by-industry/construction-industry-resources/technology/payload.html, 2023.?
Trimble, Trimble LOADRITE Payload Management for Trimble Earthworks Grade Control Platform Datasheet-English, https://heavyindustry.trible.com/resources/datasheet-brochures-english/trimble-loadrite-payload-management-for-trimble-earthworks-grade-control-platform-english, 2023.?
H. H. Jeong, M. S. Lee and Y. I. Shin, "A Study of a Hydraulic Excavator's Test to Verify of Payload Estimation by Bucket's Motion Equation", J. of Drive and Control, Vol.19, No.2, pp.11-16, 2022.?
N. Bennett, A. Walawalkar and C. Schindler, "Payload Estimation in Excavators : Model- Based Evaluation and Comparison of Current Payload Estimation Systems" CVT 2014 3rd Commercial Vehicle Technology Symposium, Vol.3, pp.1-14, 2014.?
A. Bewley, R. Shekhar, S. Leonard, B. Upcroft and P. Lever, "Real-time volume estimation of a dragline payload", 2011 IEEE International Conference on Robotics and Automation (ICRA), Vol.3, pp. 1571-1576, 2011.?
A. Gawlik and P. Kucybala, "Dynamic Weighing System used in Excavator," J. of KONES Powertrain and Transport, Vol.24, No.4, pp.31-38, 2017.?
Q. Liu and C. Huang, "A Fault Diagnosis Method Based on Transfer Convolutional Neural Networks," in IEEE Access, vol. 7, pp. 171423-171430, 2019.?
D. Li, J. Zhang, Q. Zhang and X. Wei, "Classification of ECG signals based on 1D convolution neural network," 2017 IEEE 19th International Conference on e-Health Networking, Applications and Services (Healthcom), pp. 1-6, 2017.?
E. Ostertagova, "Modelling using Polynomial Regression", Procedia Engineering, Vol. 48, pp. 500-506, 2012.?
J. Hindman, R. Burton and G. Schoenau, "An Artificial Neural Network Approach to Payload Estimation in Four Wheel Drive Loaders," 2007 ASME International Mechanical Engineering Congress and Exposition, pp.1-5, 2007.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.