$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

미세파편 및 입자를 활용한 극초음속 비행체 요격 연구
A Study on the Interception using Fine Fragments and Particles to Hypersonic Vehicles 원문보기

韓國軍事科學技術學會誌 = Journal of the KIMST, v.27 no.2, 2024년, pp.285 - 293  

김인수 (국방과학연구소 군전력연구센터) ,  강봉주 (국방과학연구소 군전력연구센터) ,  김성표 (국방과학연구소 군전력연구센터) ,  윤종원 (풍산 방산기술연구원) ,  김성훈 (풍산 방산기술연구원)

Abstract AI-Helper 아이콘AI-Helper

This paper describes the interception using fine fragments and particles to hypersonic vehicles which have a vulnerability in thermal and pressure during glide-phase flight. This interception concept is based on the fast relative velocity and the flight vulnerability of hypersonic vehicles. For the ...

주제어

참고문헌 (21)

  1. Tom Karako, Masao Dahlgren, "Complex Air Defense?Countering the Hypersonic Missile Threat," Center?for Strategic & International Studies, 2022.? 

  2. "Hypersonic missiles," Post-note, number 696, Jun.?2023.? 

  3. I. S. Kim, et al., "A Study on Alternative?Interceptions to Hypersonic Vehicles," KIMST?Annual Conference Proceedings, pp. 1204-1205, 2023.? 

  4. H. S. Son, et al., "Hypersonic Weapons and National Secutity," Journal of Aerospace System Engineering,?Vol. 16, pp. 56-69, 2022.? 

  5. Kyoung-haing Lee, "A Study on the Defense?System of the Hypersonic Missile Systems," Journal?of Aerospace System Engineering, Vol. 16, No. 5,?pp. 43-48, 2022.? 

  6. Dipl.-Lng. Hans-Ludwig Besser, "Hypersonic vehicles,"?The journal of the JAPCC, edition 24, 2017.? 

  7. "Air-launched ballistic missile kh-47M2 "Kinzhal","?https://www.redstar.gr? 

  8. Andreas Schmidt, et al., "Hypersonic threats," Joint?air power competence centre, The journal of the?JAPCC, edition 31, 2021.? 

  9. Jun Hwang, et al., "Deriving a control-oriented?model for an axisymmetric vehicle with the?power-law revolution nose," Journal of aerospace?technology and management, 2020. 09.? 

  10. Jill Hruby, "Russia's new nuclear weapon delivery?systems_An open source technical review," Nuclear?Threat Initiative, 2019.11.? 

  11. I. S. Kim, "Technical Analysis of Aero-operation?Hypersonic Missile," KIMST Annual Conference?Proceedings, pp. 1503-1504, 2021.? 

  12. K. Y. Hwang and H. N. Huh, "Research and?Development Trends of a Hypersonic Glide Vehicle?(HGV)," JKSAS, Vol. 48, No. 9, pp. 731-743, 2020.? 

  13. J. H. Park, et al., "A study on IR signal properties?in the flight profile of a hypersonic glide vehicle,"?Agency for Defense Development Report, 2022.? 

  14. H. S. Oh, et al., "Modeling and Simulation of?Hypersonic Glide Vehicle Using Trajectory Shaping,"? KSAS Spring Conference Proceedings, pp. 314-315,?2022.? 

  15. Bruce Emerson Moylan, "Raindrop demise in a?high-speed projectile flowfield," UAH Electronic?Theses and Dissertations, University of Alabama in?Huntsville, 2010.? 

  16. A. P. T. M. J. Lamberts, "Numerical simulation of?ballistic impacts on ceramic material," PDE?Automotive, pp. 1-66, 2007.? 

  17. Y. Dong, Y. Ren, S. Fan, Y. Wang and S. Zhao,?"Investigation of Notch-Induced Precise Splitting of?Different Bar Materials under High-Speed Load,"?Materials, p. 13:2461, 2022.? 

  18. W. S. Lee, C. F. Lin, "High-temperature deformation?behavior of Ti6Al4V alloy evaluated by high?strain-rate compression tests," Journal of Materials?Processing Technology, Vol. 75, pp. 127-136, 1998.? 

  19. Y. Zhang, J. C. Outeiro, T. Mabrouki, "On the?selection of Johnson-Cook constitutive model?parameters for Ti-6AL-4V using three types of?numerical models of orthogonal cutting," 15th?Conference on Modelling of Machining Operations,?pp. 112-117, 2015.? 

  20. G. C. Soares, M. C. M. Rodrigues, Leandro,?"Influence of Temperature on Mechanical Properties,?Fracture Morphology and Strain Hardening Behavior?of a 304 Stainless Steel," 15th Conference on?Modelling of Machining Operations, Materials?Research, Vol. 20, pp. 141-151, 2017.? 

  21. "High-Temperature Characteristics of Stainless Steels,"?A Designers' Handbook Series No. 9004.? 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로