다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Wear: An international journal on the science and technology of friction, lubrication and wear, v.162/164 no.B, 1993년, pp.713 - 720
Adler, T.A. , Walters, R.P.
AI-Helper
The wear and scratch hardness of 304 stainless steel was investigated with a scratch test developed by the US Bureau of Mines. The scratch was produced by a diamond indenter with a 0.2-mm spherical tip in air and in a corrosive environment. Scratch hardness was calculated from the width of the scrat...
Corros. Sci. Abd-El-Kader 26 647 1986 10.1016/0010-938X(86)90029-6 Wear-corrosion mechanism of stainless steel in chloride media
Corrosion Jang 45 402 1989 10.5006/1.3582036 The effects of galvanic interaction between martensite and ferrite in grinding media wear
Corrosion Pozzo 43 159 1987 10.5006/1.3583129 An electrochemical study of pyrrhotite-grinding media interaction under abrasive conditions
Corros. Sci. Stott 30 813 1990 10.1016/0010-938X(90)90005-P The corrosive wear of cast iron under potentiostatically-controlled conditions in sulfuric acid solutions
Kotlyar 1988 The role of localized corrosion on corrosive wear of high carbon low alloy steel grinding media
Corrosion Kotlyar 44 221 1988 10.5006/1.3583929 Simultaneous corrosion and abrasion measurements under grinding conditions
Wear Madsen 123 127 1988 10.1016/0043-1648(88)90095-6 Measurement of erosion-corrosion synergism with a slurry wear test apparatus
Corros. Sci. Lotz 30 95 1990 10.1016/0010-938X(90)90239-2 Erosion-corrosion in disturbed two phase liquid/particle flow
Corrosion Nesic 46 874 1990 10.5006/1.3580852 Relationship between the structure of disturbed flow and erosion-corrosion
Corrosion Chang 43 599 1987 10.5006/1.3583836 Corrosive-erosive wear of grinding ball metals at high velocities
Corrosion Pitt 42 312 1986 10.5006/1.3584909 Jet slurry corrosive wear of high-chromium cast iron and high-carbon steel grinding ball alloys
Prins 925 1977 Surface Effects in Crystal Plasticity Microcutting: a method to study surface plasticity at very high strain rates
Wear Torrance 67 233 1981 10.1016/0043-1648(81)90107-1 A new approach to the mechanics of abrasion
Trans. ASME J. Tribology Kato 108 346 1986 10.1115/1.3261193 Three dimensional shape effects on abrasive wear
Tribology Int. Hokkirigawa 21 51 1988 10.1016/0301-679X(88)90128-4 An experimental and theoretical investigation of ploughing, cutting and wedge formation during abrasive wear
Kitsunai Vol. 2 807 1989 The transition of microscopic wear modes during repeated sliding friction observed by semtribosystem
Wear Kayaba 110 419 1986 10.1016/0043-1648(86)90115-8 Analysis of the abrasive wear mechanism by successive observations of wear in a scanning electron microscope
T. A. Adler and R. P. Walters, Corrosion and wear of 304 stainless steel using a scratch test, to be published in Corros. Sci.
J. Electrochem. Soc. Ford 127 1325 1980 10.1149/1.2129893 Bare surface reactions rates and their relation to environment controlled cracking of aluminum alloys
Corros. Sci. Burstein 23 125 1983 10.1016/0010-938X(83)90111-7 Growth of passivating films on scratched 304L stainless steel in alkaline solutions
Corros. Sci. Marshall 23 1219 1983 10.1016/0010-938X(83)90049-5 The effects of pH on the repassivation of 304L stainless steel
Kaesche 40 1985 Metallic Corrosion, Principles of Physical Chemistry and Current Problem
Kaesche 121 1985 Metallic Corrosion, Principles of Physical Chemistry and Current Problem
Brookes 20 223 1990 I. Influence of minor alloying elements and applied potential on passive film growth Nucleation and growth of anodic films on stainless steel alloys
J. Electrochem. Soc. Simoes 137 82 1990 10.1149/1.2086444 Study of passive films formed on AISI 304 stainless steel by impedance measurement and photoelectrochemistry
Electrochem. Acta Goswami 16 1895 1971 10.1016/0013-4686(71)85145-9 Growth kinetics of passive films on Fe, Fe-Ni, Fe-Cr, Fe-Cr-Ni alloys
Corros. Sci. Barbosa 22 1025 1982 10.1016/0010-938X(82)90089-0 The role of repassivation kinetics in the measurement of the pitting potential of AISI 304 stainless steel by the scratch method
Corros. Sci. Covino 26 95 1986 10.1016/0010-938X(86)90039-9 The effects of oxygen on the open-circuit passivity of Fe-18Cr
Wear Challen 53 229 1979 10.1016/0043-1648(79)90080-2 An explanation of the different regimes of friction and wear using asperity deformation models
Wear Goddard 5 114 1962 10.1016/0043-1648(62)90235-1 A theory of friction and wear during the abrasion of metals
Wear Maan 42 365 1977 10.1016/0043-1648(77)90064-3 Low speed scratch experiments on steels
Wear Miyoshi 82 197 1982 10.1016/0043-1648(82)90292-7 Tribological properties of silicon carbide in the metal removal process
Wear Gane 24 207 1973 10.1016/0043-1648(73)90233-0 The friction and scratch deformation of metals on a micro scale
Shaw 445 1966 Mechanical Behavior of Materials
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.