다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Journal of vibration and acoustics, v.119 no.1, 1997년, pp.52 - 59
Panza, M. J. (Department of Mechanical Engineering, Gannon University, Erie, PA 16541) , McGuire, D. P. (Mechanical Products Division, Lord Corporation, Erie, PA 16514) , Jones, P. J. (Mechanical Products Division, Lord Corporation, Erie, PA 16514)
AI-Helper
An integrated mathematical model for the dynamics, actuation, and control of an active fluid/elastomeric tuned vibration isolator in a two mass system is presented. The derivation is based on the application of physical principles for mechanics, fluid continuity, and electromagnetic circuits. Improv...
10.4050/JAHS.29.30 DuVal, R. W., Gregory, C. Z., and Gupta, N. K., 1984, “Design and Evaluation of a State-Feedback Vibration Controller,” Journal of the American Helicopter Society, Vol. 29, No. 3.
10.4271/850975 Flower, W. C., 1985, “Understanding Hydraulic Mounts for Improved Vehicle Noise, Vibration and Ride Qualities,” SAE Paper No. 850975.
10.1115/1.3152706 Graf P. L. , and ShoureshiR., 1988, “Modeling and Implementation of Semi-Active Hydraulic Engine Mounts,” ASME Journal of Dynamic Systems, Measurements, and Control, Vol. 10, No. 12, pp. 422-429.
Hodgson, D. A., 1991, “Frequency-Shaped Control of Active Isolators,” Proceedings, American Helicopter Society Technical Specialists Meeting on Rotocraft Acoustics, Philadelphia.
10.1115/1.2899126 Kim G. , and SinghR., 1993, “Nonlinear Analysis of Automotive Hydraulic Engine Mount,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 115, pp. 482-487.
10.4050/JAHS.25.17 Kuczynski, W. A., and Madden, J., 1980, “Active Isolation/Rotor Balance System,” Journal of the American Helicopter Society, Vol. 25, No. 2.
Kuo, B. C., 1991, Automatic Control Systems, 6th ed., Prentice Hall, New York.
10.4271/852349 Majoram, R. H., 1985, “Pressurized Hydraulic Mounts for Improved Isolation of Vehicle Cabs,” SAE Paper No. 852349.
McGuire, D. P., 1994, “Fluidlastic® Dampers and Isolators for Vibration Control in Helicopters,” Proceedings, American Helicopter Society 50th Annual Forum, Washington, DC, May.
Miller, L. R., and Ahmadian, M., 1992, “Active Mounts-A Discussion of Future Technological Trends,” Proceedings, Inter-Noise 92, Toronto.
Panza, M. J., Sah, F. J., Mayne, R. W., and Inman, D. J., 1988, “Prospects of Damping Structures Via Actuator Interaction,” Proceedings, International Conference on Computational Engineering Science, Atlanta, pp. 44.6.1-4.
10.1115/1.2930386 Panza M. , and MayneR., 1994, “Theoretical and Experimental Investigation of Hydraulic Actuator Interaction in the Dynamics of a Rotating Flexible Beam,” ASME JOURNAL OF VIBRATION AND ACOUSTICS, Vol. 116, pp. 113-119.
10.1115/1.3269279 Rakheja S. , and SankarS., 1985, “Vibration and Shock Isolation Performance of a Semi-Active On-Off Damper,” ASME JOURNAL OF VIBRATION, ACOUSTICS, STRESS, AND RELIABILITY IN DESIGN, Vol. 107, pp. 398-403.
Sah, J. F., and Mayne, R. W., 1990, “Modeling of a Slewing Motor-Beam System,” Proceedings, ASME International Computers in Engineering Conference, Boston, Aug.
10.1115/DETC1993-0240 Sah, J. F., Lin, J. S., Crassidis, A., and Mayne, R. W., 1993, “Dynamic Interaction in a Slewing Motor-Beam System: Closed Loop Control,” Proceedings, 14th Biennial ASME Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, Sept.
10.1115/1.3269278 Tanaka N. , and KitsushimaY., 1985, “A Study of Active Vibration Isolation,” ASME JOURNAL OF VIBRATION, ACOUSTICS, STRESS, AND RELIABILITY IN DESIGN, Vol. 107, pp. 392-397.
10.1115/1.3269478 Tanaka N. , and KitsushimaY., 1988, “Optimal Design of Active Vibration Isolation System,” ASME JOURNAL OF VIBRATION, ACOUSTICS, STRESS, AND RELIABILITY IN DESIGN, Vol. 110, pp. 42-48.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.