최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of the American Ceramic Society, v.82 no.1, 1999년, pp.50 - 56
Jr. Walker, William J. , Reed, James S. , Verma, Surendra K.
Alumina specimens were prepared by compacting well‐characterized spray‐dried alumina granules of excellent deformability, followed by sintering. The strength and Weibull modulus were measured and microstructure was evaluated for specimens prepared from granules with different density a...
Strong Solids Kelly A. 1986
Kendall, K., Alford, N. McN., Tan, S. R., Birchall, J. D.. Influence of toughness on Weibull modulus of ceramic bending strength. Journal of materials research, vol.1, no.1, 120-123.
B. D.MosserIII “Processing Steps to Eliminate Green and Fired Defects in Dry Pressed Alumina Substrates”;M.S. Thesis.Alfred University Alfred New York 1987.
Kendall, K.. Influence of powder structure on processing and properties of advanced ceramics. Powder technology, vol.58, no.3, 151-161.
Science and Technology of Zirconia V Haylock J. 249 1993
Takahashi, Hideo, Shinohara, Nobuhiro, Uematsu, Keizo, JunIchiro, Tsubaki. Influence of Granule Character and Compaction on the Mechanical Properties of Sintered Silicon Nitride. Journal of the American Ceramic Society, vol.79, no.4, 843-848.
Introduction to Ceramics Kingery W. D. 1976
Engineered Materials Handbook Quinn G. D. 585 1991
Ceramic Transactions Verma S. K. 369 1991
W. J.Walker Jr. J. S.Reed andS. K.Verma “Influence of Slurry Parameters on Characteristics of Spray‐Dried Granules ”J. Am. Ceram. Soc. in review.
Principles of Ceramic Processing Reed J. S. 1995
Song, Jin‐Hua, Evans, Julian R. G.. A Die Pressing Test for the Estimation of Agglomerate Strength. Journal of the American Ceramic Society, vol.77, no.3, 806-814.
MIL STD 1942 “4‐Pt. Flexural Testing Standard ” Army Materials Technology Lab Watertown MA 1979.
W. J.Walker Jr. “Powder Compaction Processing to Optimize the Granule Characteristics for Advanced Ceramics”;Ph.D. Thesis.Alfred University Alfred NY 1996.
Deis, Terry A., Lannutti, John J.. X‐ray Computed Tomography for Evaluation of Density Gradient Formation during the Compaction of Spray‐Dried Granules. Journal of the American Ceramic Society, vol.81, no.5, 1237-1247.
Technometrics Thomas D. R. 445 11 1969 10.1080/00401706.1969.10490706 Inferences on the Parameters of Weibull Distribution
Handbook of Properties of Technical and Engineering Ceramics Morrell R. 1985
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.