최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기IEEE journal of solid-state circuits, v.33 no.10, 1998년, pp.1470 - 1481
Niknejad, A.M. (Dept. of Electr. Eng. & Comput. Sci., California Univ., Berkeley, CA, USA) , Meyer, R.G.
Silicon integrated circuit spiral inductors and transformers are analyzed using electromagnetic analysis. With appropriate approximations, the calculations are reduced to electrostatic and magnetostatic calculations. The important effects of substrate loss are included in the analysis. Classic circuit analysis and network analysis techniques are used to derive two-port parameters from the circuits. From two-port measurements, low-order, frequency-independent lumped circuits are used to model the physical behavior over a broad-frequency range. The analysis is applied to traditional square and polygon inductors and transformer structures as well as to multilayer metal structures and coupled inductors. A custom computer-aided-design tool called ASITIC is described, which is used for the analysis, design, and optimization of these structures. Measurements taken over a frequency range from 100 MHz to 5 GHz show good agreement with theory.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.