참고문헌 (25)

1. Am. Ceram. Soc. Bull. Bruch C. A. 799 41 12 1962 Sintering Kinetics for the High Density Alumina Process 

2. KELLETT, BRUCE, LANGE, F. F.. Stresses Induced by Differential Sintering in Powder Compacts. Journal of the American Ceramic Society, vol.67, no.5, 369-371.

   상세보기

3. EVANS, A. G.. Considerations of Inhomogeneity Effects in Sintering. Journal of the American Ceramic Society, vol.65, no.10, 497-501.

   상세보기

4. Am. Ceram. Soc. Bull. Phillips D. H. 69 72 11 1993 X‐ray Computed Tomography for the Testing and Evaluation of Ceramic Process 

5. Deis, Terry A., Lannutti, John J.. X‐ray Computed Tomography for Evaluation of Density Gradient Formation during the Compaction of Spray‐Dried Granules. Journal of the American Ceramic Society, vol.81, no.5, 1237-1247.

   상세보기

6. Int. J. Powder Metall. Gethin D. T. 385 30 4 1994 An Investigation of Powder Compaction Processes 

   상세보기

7. Am. Ceram. Soc. Bull. Lannutti J. J. 53 76 1 1997 Density Gradient Evolution during Dry Pressing 

   상세보기

8. NIES, C. W., MESSING, G. L.. Effect of Glass‐Transition Temperature of Polyethylene Glycol‐Plasticized Polyvinyl Alcohol on Granule Compaction. Journal of the American Ceramic Society, vol.67, no.4, 301-304.

   상세보기

9. Am. Ceram. Soc. Bull. Brewer J. A. 212 60 2 1981 Effect of Relative Humidity on the Compaction of Barium Titanate and Manganese Zinc Ferrite Agglomerates Containing Polyvinyl Alcohol 

   상세보기

10. Aydin, I., Briscoe, B.J., Sanliturk, K.Y.. Density distributions during the compaction of alumina powders: A comparison of a computational prediction with experiment. Computational materials science, vol.3, no.1, 55-68.

    상세보기

11. Met. Trans. Duwez P. 137 1 1 1949 Pressure Distribution in Compacting Metal Powders 

12. Trans. Inst. Chem. Eng. Train D. 258 35 1 1957 Transmission of Forces through a Powder Mass during the Process of Pelleting 

13. T. A.Deis “Compact Density Gradient Dependence on Processing Variables and Subsequent Effects on Sintering Shrinkage;”M. S. Thesis p.21.The Ohio State University Columbus OH 1996. 

14. James, B. A.. Die Wall Lubrication for Powder Compaction: A Feasible Solution?. Powder metallurgy, vol.30, no.4, 273-280.

    상세보기

15. Fischmeister, H. F., Arzt, E.. Densification of Powders by Particle Deformation. Powder metallurgy, vol.26, no.2, 82-88.

    상세보기

16. Rahaman, Mohamed N., De Jonghe, Lutgard C., Chu, May‐Ying. Effect of Green Density on Densification and Creep During Sintering. Journal of the American Ceramic Society, vol.74, no.3, 514-519.

    상세보기

17. Coble, R. L.. Sintering Crystalline Solids. II. Experimental Test of Diffusion Models in Powder Compacts. Journal of applied physics, vol.32, no.5, 793-799.

    상세보기

18. LANGE, F. F., METCALF, M.. Processing‐Related Fracture Origins: II, Agglomerate Motion and Cracklike Internal Surfaces Caused by Differential Sintering. Journal of the American Ceramic Society, vol.66, no.6, 398-406.

    상세보기

19. Veringa, H. J.. Sintering models and the development of instabilities. Journal of materials science, vol.26, no.22, 5985-5995.

    상세보기

20. N.Ozkan andB. J.Briscoe “Shape Prediction Procedure for Die‐Pressed Ceramic Compacts”; presented at the 5th European Ceramic Society Conference (Versallines France June22-26 1997). 

21. Tsvelikh, A., Thompson, W., Easton, A., Freshwater, I.. A geometrical finite element model of the sintering process of advanced ceramics. Computational materials science, vol.3, no.4, 457-464.

    상세보기

22. 10.1007/978-1-4757-2321-2 

    

23. Phillips, D.H., Lannutti, J.J.. Measuring physical density with X-ray computed tomography. NDT & E international : independent nondestructive testing and evaluation, vol.30, no.6, 339-350.

    상세보기

24. P. K.Lu andJ. J.Lannutti “Effect of Density Gradients on Dimensional Tolerance during Binder Removal ”J. Am. Ceram. Soc. in press. 

25. Sintering and Related Phenomena Kingery W. D. 471 1967