최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of the Electrochemical Society : JES, v.147 no.12, 2000년, pp.4671 -
Castillo-Mejia, Danilo , Perlov, Andreas , Beaudoin, Stephen
A two-dimensional, finite element wafer scale model for chemical mechanical polishing (CMP) is described. The model is solved using the commercial software package ANSYS (Version 5.5. ANSYS Inc.). The proposed model shows good qualitative agreement between observed CMP nonuniformities obtained on Applied Materials' Mirra polisher and the distribution of calculated von Mises stresses on the wafer surface. The paper also considers three different polishing parameters that influence the polishing nonuniformity on the Mirra: (i) the effect of the distance between the retaining ring and wafer, known as the gap, (ii) the effect of varying retaining ring pressure at a constant wafer down force, and (iii) the effect of pad/wafer relative velocity. The results suggest that improved wafer uniformity is achieved when the gap between the ring and wafer is maximized or completely eliminated, when the ring pressure is close to the carrier pressure, and when the pad/wafer relative velocity is high. The model results also indicate that all three of the effects mentioned above must be considered in an optimization process.(Author abstract)
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.