다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Materials characterization, v.45 no.1, 2000년, pp.39 - 49
Zhang, M.-X. (Corresponding author. Tel.: +61-7-3365-3669) , Kelly, P.M. (fax: +61-7-3365-3888) , Bekessy, L.K. (Department of Mining, Minerals and Materials Engineering, University of Queensland, St. Lucia, Brisbane, QLD 4072, Australia) , Gates, J.D. (Department of Mining, Minerals and Materials Engineering, University of Queensland, St. Lucia, Brisbane, QLD 4072, Australia)
AI-Helper
AbstractA new X-ray technique has been developed for determining the amount of retained austenite in steels with preferred orientation, such as white cast irons and deformed steels. The technique uses an X-ray texture goniometer. The X-ray goniometer was run as if a texture was being determined, but...
Metall Trans Bhadeshia 10A 895 1979 10.1007/BF02658309 The bainite transformation in a silicon steel
Metall Trans Chen 20A 437 1989 10.1007/BF02653923 Effect of phosphorus on the formation of retained austenite and mechanical properties in Si-containing low carbon steel sheet
Metall Trans Thomas 2A 2373 1971 10.1007/BF02814875 Electron microscopy investigations of ferrous martensite
Metall Trans Sakuma 22A 489 1991 10.1007/BF02656816 Mechanical properties and retained austenite in intercritically heat-treated bainite-transformed steel and their variation with Si and Mn additions
Metall Trans Zarei Hanzaki 28A 2405 1997 10.1007/s11661-997-0197-0 Retained austenite characteristics in thermomechanically processed Si-Mn transformation-induced plasticity steels
Trans AIME Hilliard 221 344 1961 An evaluation of procedures in quantitative metallography for volume-fraction analysis
Zavod Lab (Russian) Pemov 4 52 1982 Determination of small quantities of retained austenite in low-alloy steels
Fysh 1985 Retained austenite measurement using Mossbauer spectroscopy
Metalozn (Poland) Kesy 103-105 6 1990 Application of Mossbauer spectrometry for the determination of retained austenite
Trans Metal Heat Treat (China) Ma 10 54 1989 The Mossbauer method for quantitative determination of retained austenite in high speed steel
Met Technol Averbach 15 1 1948 X-ray determination of retained austenite by integrated intensity
Trans ASM Miller 57 892 1964 A rapid X-ray method for the determination of retained austenite
J Iron Steel Inst Durnin 206 60 1968 Determination of retained austenite in steel by X-ray diffraction
J Iron Steel Inst Arnell 206 1035 1968 Correspondence: determination of retained austenite in steel by X-ray diifraction
Trans AIME Averbach 215 682 1959 An X-ray method for the determination of beta phase in a Titanium alloy
Depiak 235 1994 Comparative materials characterisation technique for determination of retained austenite
Trans ASM Averbach 42 112 1950 Measurement of retained austenite in carbon steels
Trans ASM Beu 48 213 1955 Some effects of metal removal and heat treatment on the surfaces of hardened steels
Trans AIME Lopata 233 288 1965 Quantitative phase analysis in textured materials
Trans AIME Gullberg 236 1482 1969 X-ray determination of the volume fraction of phase in textured materials
Trans AIME Morris 239 1586 1967 Measurement of retained austenite in precipitation-hardening stainless steels
Trans ASM Miller 61 592 1968 Volume fraction analysis of phases in textured alloys
J Heat Treat Kim 1 43 1979 10.1007/BF02833237 X-ray method of measuring retained austenite in heat treated white cast irons
J Mater Sci Hann 32 1249 1997 10.1023/A:1018544204267 A transformation toughening white cast iron
Met Sci Ball 16 332 1982 10.1179/030634582790427460 X-ray method for determination of retained austenite in steels with pronounced texture
J Phys E: Sci Instrum Bate 20 51 1987 10.1088/0022-3735/20/1/009 A modified Siemens texture goniometer
Z Metallkd Bunge 75 124 1984 Principle of texture goniometer measurements
Bate 1990 Manual of the Siemens Goniometer and the TEXTAN Software Texture determination and analysis
Cullity 107 1978 Elements of X-Ray Diffraction
Zhang 1999 Study of stress induced martensitic transformation in Fe-Ni-C alloy
Zhang 1998 A Model of Stress Induced Martensitic Transformation in Fe-Ni-C Alloy
Cast Met Kootsookos 7 239 1995 10.1080/09534962.1995.11819184 Development of a white cast iron of fracture toughness 40 Mpam1/2
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.