최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國鋼構造學會 論文集 = Journal of Korean Society of Steel Construction, v.32 no.1, 2020년, pp.55 - 65
Kyung, Kab Soo , Lee, Jun Ho , Park, Jin Eun , Lee, Sung Jin , Kong, Byung Seung
초록이 없습니다.
Twomey, B. (2012) Decommissioning Financial Planning & Analysis, Presented at CCOP and EPPM Workshop on End of Concession & Decommissioning Guidelines, Coordinating Committee for Geoscience Programmes in East and Southeast Asia, Thailand.
Ahn, K.S., Choi, B.J., Oh, Y.S., and Kim, J.W. (2010) An Availability Analysis on the Gap K-Joints Using High Strength Circular Hollow Section Members, Journal of Korean Society of Steel Construction, KSSC, Vol. 22, No.2, pp.109-119 (in Korean).
Lee, S.J., Kim, J.W., Kim, S.S., Lee, M.J., and Yang, J.G. (2011) In-Plane Bending Moment Capacity of T-Joints in the Circular Hollow Section of New High Strength Steel Subjected to Cyclic Loadings, Journal of Korean Society of Steel Construction, KSSC, Vol.23, No.2, pp. 169-177 (in Korean).
Sadat Hosseini, Alireza, Bahaari, Mohammad Reza, Lesani, Mohammad. Parametric Study of FRP Strengthening on Stress Concentration Factors in an Offshore Tubular T-Joint Subjected to In-Plane and Out-of-Plane Bending Moments. International journal of steel structures, vol.19, no.6, 1755-1766.
Wang, X., Chen, T., Zhao, Q., Yuan, G., Liu, J.. Fatigue evaluation of grouted connections under bending moment in offshore wind turbines based on ABAQUS scripting interface. International journal of steel structures, vol.16, no.4, 1149-1159.
Efthymiou, M. (1988) Development of SCF Formulae and Generalised Influence Functions for Use in Fatigue Analysis, Proceedings of Offshore Tubular Joints Conference on Recent Developments in Tubular Joints Technology, UEG Offshore Research, UK, pp.1-13.
Graff, W.J. (1981) Introduction to Offshore Structures: Design, Fabrication, Installation, Gulf Publishing, USA.
경갑수, 이준호, 박진은, 이성진. 고정식 자켓구조물의 기하형상 조건에 따른 구조거동특성. 韓國鋼構造學會 論文集 = Journal of Korean Society of Steel Construction, vol.30, no.3, 163-173.
Hobbacher, A. (2008) Recommendations for Fatigue Design of Welded Joints and Components (IIW Document IIW-1823-07), International Institute of Welding, France.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.