Sha, Gang
(Department of Materials, Oxford Centre for Advanced Materials and Composites, University of Oxford, Oxford OX1 3PH, UK)
,
O’Reilly, Keyna
(Department of Materials, Oxford Centre for Advanced Materials and Composites, University of Oxford, Oxford OX1 3PH, UK)
,
Cantor, Brian
(Department of Materials, Oxford Centre for Advanced Materials and Composites, University of Oxford, Oxford OX1 3PH, UK)
,
Worth, John
(Alcan International Limited, Banbury Laboratory, Southam Road, Banbury, Oxon OX16 7 SP, UK)
,
Hamerton, Richard
(Alcan International Limited, Banbury Laboratory, Southam Road, Banbury, Oxon OX16 7 SP, UK)
AbstractBridgman furnace solidification has been used to study directional solidification of a model 6xxx series alloy. At solidification front growth velocities in the range of 5–120mm/min, α-AlFeSi, β-AlFeSi and Mg2Si were identified by transmission electron microscopy (TEM), ...
AbstractBridgman furnace solidification has been used to study directional solidification of a model 6xxx series alloy. At solidification front growth velocities in the range of 5–120mm/min, α-AlFeSi, β-AlFeSi and Mg2Si were identified by transmission electron microscopy (TEM), X-ray diffractometry (XRD) and differential scanning calorimetry (DSC). MTDATA predicts that α-AlFeSi and Mg2Si should form during equilibrium solidification. DSC results confirm that β-AlFeSi is a metastable phase. The eutectic reaction resulting in α-AlFeSi formation during directional solidification does not take place at a cooling rate of 10K/min. SEM and TEM observations show that intermetallic particle size strongly depends on the Bridgman growth velocity. Quantitative XRD results show that the maximum proportion of metastable β-AlFeSi intermetallic phase is produced at relatively low growth velocities in the range of 30–60mm/min. Both DSC and XRD analysis confirm that at higher growth velocities, such as 120mm/min, the formation of α-AlFeSi phase by the eutectic reaction dominates the phase selection.
AbstractBridgman furnace solidification has been used to study directional solidification of a model 6xxx series alloy. At solidification front growth velocities in the range of 5–120mm/min, α-AlFeSi, β-AlFeSi and Mg2Si were identified by transmission electron microscopy (TEM), X-ray diffractometry (XRD) and differential scanning calorimetry (DSC). MTDATA predicts that α-AlFeSi and Mg2Si should form during equilibrium solidification. DSC results confirm that β-AlFeSi is a metastable phase. The eutectic reaction resulting in α-AlFeSi formation during directional solidification does not take place at a cooling rate of 10K/min. SEM and TEM observations show that intermetallic particle size strongly depends on the Bridgman growth velocity. Quantitative XRD results show that the maximum proportion of metastable β-AlFeSi intermetallic phase is produced at relatively low growth velocities in the range of 30–60mm/min. Both DSC and XRD analysis confirm that at higher growth velocities, such as 120mm/min, the formation of α-AlFeSi phase by the eutectic reaction dominates the phase selection.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.