[논문]Fatigue Life Simulation of Tractor Spiral Bevel Gear According to Major Agricultural Operations

Kim, Wan-Soo; Kim, Yong-Joo; Baek, Seung-Min; Moon, Seok-Pyo; Lee, Nam-Gyu; Kim, Yeon-Soo; Park, Seong-Un; Choi, Yong; Kim, Young-Keun; Choi, Il-Su; Choi, Duck-Kyu; Choi, Chang-Hyun

doi:10.3390/app10248898

[해외논문] Fatigue Life Simulation of Tractor Spiral Bevel Gear According to Major Agricultural Operations 원문보기

Applied sciences, v.10 no.24, 2020년, pp.8898 -

Kim, Wan-Soo (Department of Biosystems Machinery Engineering, Chungnam National University, Daejeon 34134, Korea) , Kim, Yong-Joo (Department of Biosystems Machinery Engineering, Chungnam National University, Daejeon 34134, Korea) , Baek, Seung-Min (Department of Smart Agriculture Systems, Chungnam National University, Daejeon 34134, Korea) , Moon, Seok-Pyo (Department of Biosystems Machinery Engineering, Chungnam National University, Daejeon 34134, Korea) , Lee, Nam-Gyu (Department of Biosystems Machinery Engineering, Chungnam National University, Daejeon 34134, Korea) , Kim, Yeon-Soo (Department of Biosystems Machinery Engineering, Chungnam National University, Daejeon 34134, Korea) , Park, Seong-Un (Reliability Test Team, TYM ICT Co. Ltd., Gongju 32530, Korea) , Choi, Yong (Upland Mechanization Team, National Institute of Agricultural Sciences, Rural Development Administration (RDA), Jeonju 54875, Korea) , Kim, Young-Keun (Upland Mechanization Team, National Institute of Agricultural Sciences, Rural Development Administration (RDA), Jeonju 54875, Korea) , Choi, Il-Su (Upland Mechanization Team, National Institute of Agricultural Sciences) , Choi, Duck-Kyu , Choi, Chang-Hyun

Abstract ▼ AI-Helper

The spiral bevel gear in a tractor, unlike the other gears in the transmission, is one of the most vulnerable gears in terms of fatigue life, as it is consistently driven throughout the operations of the tractor. Conventional fatigue life tests of transmission gears require expensive equipment and repeated tests, and do not reflect dynamic field loads. The aim of this study is to develop a simulation model which can replace conventional fatigue life tests for actual gears, in order to evaluate the fatigue life of a tractor using dynamic field load data. A transmission simulation model including a spiral bevel gear was developed using commercial software. In order to measure the dynamic load of the tractor according to various field operations, an axle torque measurement system was developed, and field experiments were performed for major agricultural operations occurring in the field. Fatigue life was calculated using Rainflow cycle counting (RFC), the Smith-Watson-Topper (SWT) model, and S-N curves based on torque data measured in the field. The fatigue life under moldboard plow tillage, subsoiler tillage, rotary tillage, and baler operation were 13,599, 285, 278,884, and 525,977 h, respectively. The fatigue life of the tractor, according to subsoiler tillage and baler operation, was 0.104 and 192 times the service life, respectively, where the difference between these two operations was about 1846 times. The fatigue life of the tractor, according to the attached implement type, was significantly different. Therefore, it can be seen that the fatigue life of a tractor can be significantly different, depending on agricultural operation type which the farmer uses most often; this can be used as basic data for tractor design and evaluation. In addition, it is considered that the developed simulation model can be applied to fatigue life evaluation using dynamic field load data.

참고문헌 (45)

The Freedonia Group (2020, September 30). Freedonia Group Global Agricultural Equipment. Available online: https://www.freedoniagroup.com/World-Agricultural-Equipment.html.
KAMICO, and KSAM (2019). Agricultural Machinery Yearbook in Republic of Korea, Korea Agricultural Machinery Industry Cooperative and Korean Society for Agricultural Machinery, KSAM.
Kim Effects of gear selection of an agricultural tractor on transmission and PTO load during rotary tillage Soil Tillage Res. 2013 10.1016/j.still.2013.07.013 134 90

상세보기
10.3390/app10124195 Kim, W.S., Kim, Y.J., Baek, S.Y., Baek, S.M., Kim, Y.S., and Park, S.U. (2020). Development of a prediction model for tractor axle torque during tillage operation. Appl. Sci., 10.

상세보기
Kim Case study of accelerated life test method for agricultural tractor transmission J. Biosyst. Eng. 2009 10.5307/JBE.2009.34.5.325 34 325

원문보기 상세보기
Ashmore Accelerated service life testing of automotive vehicles on a test course Veh. Syst. Dyn. 1992 10.1080/00423119208969004 21 89

상세보기
10.3390/en12061100 Kim, Y.S., Lee, P.U., Kim, W.S., Kwon, O.W., Kim, C.W., Lee, K.H., and Kim, Y.J. (2019). Strength analysis of a PTO (Power Take-Off) gear-train of a multi-purpose cultivator during a rotary ditching operation. Energies, 12.

상세보기
Kim Strength analysis of mechanical transmission using equivalent torque of plow tillage of an 82 kW-class tractor Korean J. Agric. Sci. 2019 10.7744/kjoas.20190048 46 723

원문보기 상세보기
Baek Analysis of the load distribution and contact safety factor of PTO gears of a 71 kW class agricultural tractor Korean J. Agric. Sci. 2020 10.7744/kjoas.20200023 47 327

원문보기 상세보기
Litvin Computerized design, simulation of meshing, and contact and stress analysis of face-milled formate generated spiral bevel gears Mech. Mach. Theory 2002 10.1016/S0094-114X(01)00086-6 37 441

상세보기
Kong Strength Design Evaluation of the Multi-range Transmission J. Korea Soc. Power Syst. Eng. 2011 10.9726/kspse.2011.15.3.012 15 12

원문보기 상세보기
Wu Transmission and load analysis for a crowned helical gear pair with twist-free tooth flanks generated by an external gear honing machine Mech. Mach. Theory 2016 10.1016/j.mechmachtheory.2015.11.014 98 36

상세보기
Dong Time domain-based gear contact fatigue analysis of a wind turbine drivetrain under dynamic conditions Int. J. Fatigue 2013 10.1016/j.ijfatigue.2012.10.011 48 133

상세보기
Islam Performance evaluation of trenchless subsurface drainage piping machine J. Biosyst. Eng. 2019 10.1007/s42853-019-00032-y 44 218

상세보기
Okyere Analysis of draft force requirement of a compact disc harrow and model development for future predictions J. Biosyst. Eng. 2019 10.1007/s42853-019-00003-3 44 47

상세보기
Kim Analysis of power requirement of 78 kW class agricultural tractor according to the major field operation Trans. Korean Soc. Mech. Eng. A 2019 10.3795/KSME-A.2019.43.12.911 43 911

상세보기
Kim Analysis of power requirement of agricultural tractor by major field operation J. Biosyst. Eng. 2011 10.5307/JBE.2011.36.2.79 36 79

원문보기 상세보기
Kim Evaluation of PTO severeness for 78 kW-class tractor according to disk plow tillage and rotary tillage J. Drive Control 2019 16 23
Kim Work load analysis for determination of the reduction gear ratio for a 78 kW all wheel drive electric tractor design Korean J. Agric. Sci. 2019 10.7744/kjoas.20190047 46 613

원문보기 상세보기
Renius Random load fatigue in tractor transmissions Landtechnik 2001 56 390
Kim Analysis of transmission load of agricultural tractors J. Terramechanics 2000 10.1016/S0022-4898(99)00022-1 37 113

상세보기
Lee Analysis of load spectrum of 70kW-class tractor for plowing operation J. Agric. Life Sci. 2014 45 18
Graham Cumulative damage used to analyze tractor final drives Trans. ASAE 1962 10.13031/2013.40960 5 0139

상세보기
Lee Analysis of the PTO load of a 75 kW agricultural tractor during rotary tillage and baler operation in Korean upland fields J. Terramechanics 2015 10.1016/j.jterra.2015.06.002 60 75

상세보기
Han Severeness of transmission loads of agricultural tractor for rotary operations in poorly drained paddy field J. Biosyst. Eng. 1999 24 293
Mattetti Damage evaluation of driving events for agricultural tractors Comput. Electron. Agric. 2017 10.1016/j.compag.2017.01.018 135 328

상세보기
10.3390/app7101027 Bai, J., Wu, X., Gao, F., and Li, H. (2017). Analysis of powertrain loading dynamic characteristics and the effects on fatigue damage. Appl. Sci., 7.

상세보기
10.31399/asm.tb.ffub.9781627083034 Campbell, F. (2012). Fatigue and Fracture, ASM International.
Xiong A reliability-based data treatment system for actual load history Fatigue Fract. Eng. Mater. Struct. 2005 10.1111/j.1460-2695.2005.00924.x 28 875

상세보기
Dowling Fatigue failure predictions for complicated stress-strain histories J. Mater. 1972 7 71
Chen Study on reliability of shearer permanent magnet semi-direct drive gear transmission system Int. J. Fatigue 2020 10.1016/j.ijfatigue.2019.105387 132 105387

상세보기
Yan Load characteristic analysis and fatigue reliability prediction of wind turbine gear transmission system Int. J. Fatigue 2020 10.1016/j.ijfatigue.2019.105259 130 105259

상세보기
Smith A stress-strain fuction for the fatigue of metals J. Mater. 1970 5 767
Fatemi Cumulative fatigue damage and life prediction theories Int. J. Fatigue 1998 10.1016/S0142-1123(97)00081-9 20 9

상세보기
Lee, D.H. (2011). Analysis of Power Requirements of Tractor for Field Operations, Sungkyunkwan University.
Lee Analysis of the effects of operating point of tractor engine on fatigue life of PTO gear using simulation Korean J. Agric. Sci. 2016 10.7744/kjoas.20160047 43 441

원문보기 상세보기
Fernandes Tooth bending fatigue failures in gears Eng. Fail. Anal. 1996 10.1016/1350-6307(96)00008-8 3 219

상세보기
ISO (2014). ISO 10300-1:2014. Calculation of Load Capacity of Bevel Gears-Part 1: Introduction and General Influence Factors, Vernier.
ISO (2014). ISO 10300-2:2014. Calculation of Load Capacity of Bevel Gears-Part 2: Calculation of Surface Durability (Pitting), Vernier.
ISO (2014). ISO 10300-3:2014. Calculation of Load Capacity of Bevel Gears-Part 3: Calculation of Tooth Root Strength, Vernier.
Park, S.U. (2019). Fatigue life evaluation of spiral bevel gear of transmission using agricultural workload of tractor. [Ph.D. Thesis, Chungnam National University].
Miner Cumulative damage in fatigue J. Appl. Mech. 1945 10.1115/1.4009458 3 159

상세보기
Lias Bending Fatigue Life Prediction of Spur Gear in Axial Misalignment Condition IOP Conf. Ser. Mater. Sci. Eng. 2020 10.1088/1757-899X/864/1/012109 864 012109

상세보기
Korean Standards Association (2015). Cylindrical Gears-ISO System of Accuracy-Part 1: Definitions and Allowable Values of Deviations Relevant to Corresponding Flanks of Gear Teeth, Korean Standards Association.
Kim Effect of the Cone Index on the Work Load of the Agricultural Tractor J. Drive Control 2020 17 9

LOADING...

활용도 분석정보

상세보기

다운로드

내보내기

활용도 Top5 논문

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

[해외논문] Fatigue Life Simulation of Tractor Spiral Bevel Gear According to Major Agricultural Operations 원문보기

Abstract ▼ AI-Helper

참고문헌 (45)

이 논문을 인용한 문헌

연구과제 타임라인

활용도 분석정보

활용도 Top5 논문

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트

연합인증

[해외논문] Fatigue Life Simulation of Tractor Spiral Bevel Gear According to Major Agricultural Operations 원문보기

Abstract ▼ AI-Helper

참고문헌 (45)

이 논문을 인용한 문헌

연구과제 타임라인

전체(0) 논문(0) 특허(0) 보고서(0)

전체(0) 논문(0) 특허(0) 보고서(0)

활용도 분석정보

활용도 Top5 논문 더보기

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트

활용도 Top5 논문