다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Applied sciences, v.11 no.2, 2021년, pp.840 -
Citarella, Roberto (Department of Industrial Engineering, University of Salerno, 84084 Fisciano, Italy) , Giannella, Venanzio (Department of Industrial Engineering, University of Salerno, 84084 Fisciano, Italy)
AI-Helper
The advent of additive manufacturing (AM) processes applied to the fabrication of structural components has created the need for design methodologies and structural optimization approaches that take into account the specific characteristics of the fabrication process. While AM processes give unprece...
Citarella Modelling and Optimizing Structural Behavior of Advanced Materials for Aerospace Int. J. Aerosp. Eng. 2018 10.1155/2018/6296145 2018 6296145
Caiazzo Laser powder-bed fusion of Inconel 718 to manufacture turbine blades Int. J. Adv. Manuf. Technol. 2017 10.1007/s00170-017-0839-3 93 4023
10.3390/app10051652 Citarella, R., de Castro, P.M.S.T., and Maligno, A. (2020). Editorial on Special Issue “Fatigue and Fracture Behaviour of Additive Manufacturing Mechanical Components”. Appl. Sci., 10.
Sepe Correlation between real geometry and tensile mechanical behaviour for Ti6Al4V electron beam melted thin specimens Theor. Appl. Fract. Mech. 2020 10.1016/j.tafmec.2020.102519 107 102519
10.3390/app10249106 Borrelli, A., D’Errico, G., Borrelli, C., and Citarella, R. (2020). Assessment of Crash Performance of an Automotive Component Made through Additive Manufacturing. Appl. Sci., 10.
10.3390/app10228197 Sathujoda, P., Batchu, A., Obalareddy, B., Canale, G., Maligno, A., and Citarella, R. (2020). Free Vibration Analysis of a Thermally Loaded Porous Functionally Graded Rotor-Bearing System. Appl. Sci., 10.
10.3390/app10082936 Mehditabar, A., Ansari Sadrabadi, S., Sepe, R., Armentani, E., Walker, J., and Citarella, R. (2020). Influences of Material Variations of Functionally Graded Pipe on the Bree Diagram. Appl. Sci., 10.
10.3390/app10165556 Fischer, T., Kuhn, B., Rieck, D., Schulz, A., Trieglaff, R., and Wilms, M.B. (2020). Fatigue Cracking of Additively Manufactured Materials-Process and Material Perspectives. Appl. Sci., 10.
10.3390/app10124212 Carrozza, A., Aversa, A., Mazzucato, F., Lombardi, M., Biamino, S., Valente, A., and Fino, P. (2020). An Innovative Approach on Directed Energy Deposition Optimization: A Study of the Process Environment’s Influence on the Quality of Ti-6Al-4V Samples. Appl. Sci., 10.
10.3390/app10103379 Armentani, E., Greco, A., De Luca, A., and Sepe, R. (2020). Probabilistic Analysis of Fatigue Behavior of Single Lap Riveted Joints. Appl. Sci., 10.
10.3390/app10093284 Xie, B., Xue, J., Ren, X., Wu, W., and Lin, Z. (2020). A Comparative Study of the CMT+P Process on 316L Stainless Steel Additive Manufacturing. Appl. Sci., 10.
10.3390/app10010070 Li, C., Gu, H., Wang, W., Wang, S., Ren, L., Wang, Z., Ming, Z., and Zhai, Y. (2020). Effect of Heat Input on Formability, Microstructure, and Properties of Al-7Si-0.6Mg Alloys Deposited by CMT-WAAM Process. Appl. Sci., 10.
10.3390/app10051563 Jin, W., Zhang, C., Jin, S., Tian, Y., Wellmann, D., and Liu, W. (2020). Wire Arc Additive Manufacturing of Stainless Steels: A Review. Appl. Sci., 10.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.