참고문헌 (14)

1. ANOVA-TM Users Manual, 1993, American Supplier Institute 

2. Electrical Power & Energy Systems M. Bounou 17 No. 2 113 1995 10.1016/0142-0615(95)91406-A Bounou, M., Lefebvre, S., and Do, X. D., 1995, “Improving the Quality of an Optimal Power Flow Solution by Taguchi Method,”Electrical Power & Energy Systems, Vol. 17, No. 2, pp. 113-118 

   상세보기

3. Journal of Mechanical design, Transactions of the ASME W. Chen 118 478 1996 10.1115/1.2826915 Chen, W., Allen, J. K., Tsui, K. L., and Mistree, F., 1996, “A Procedure for Robust Design: Minimizing Variations Caused by Noise Factors and Control Factors,”Journal of Mechanical design, Transactions of the ASME, Vol. 118, pp. 478-485. 

   상세보기

4. Corson, D. N. and Scott, D., 1993, “Cooling the Side Panel Surface of a Residual Cooking Appliance,” Case Studies & Tutorials,Eleventh Annual Taguchi Symposium, November 2-4, Costa Mesa, California, American Supplier Institute 

5. Fowlkes, W. Y. and Creveling, C. M., 1995,Engineering Methods for Robust Product Design, Addison-Wesley Publishing Company 

6. National Technical Report K. Kadoya 30 No. 5 613 1984 Kadoya, K., Ohmichi, Y., Hosokawa, F., Yamamoto, T., Ishihara, T., Iwamura, A., Matsui, H., and Yari, K., 1984, “Condensation-type Clothes Dryer with New Heat-exchanger Fan,”National Technical Report, Vol. 30, No. 5, pp. 613-619 (in Japanese) 

7. Transactions of the Korean Society of Mechanical Engineers J. K. Kim 19 No. 10 2710 1995 Kim, J. K., 1995, “Study on the Development for Low Noise Package Air-conditioner,”Transactions of the Korean Society of Mechanical Engineers, Vol. 19, No. 10, pp. 2710-2719 (in Korean) 

8. Kim, J. K., 1998, “An Experimental Study on the Optimum Design of Sirocco Fan,”Proceedings of the KSME 1998 Fall Annual Meeting B, KSME 98F332, pp. 787-792 (in Korean) 

9. Transactions of the Korean Society of Mechanical Engineers B J. K. Kim 23 No. 6 761 1999 Kim, J. K., 1999, “An Experimental Study on the Optimum Design of Sirocco Fan by using Taguchi Method,”Transactions of the Korean Society of Mechanical Engineers B, vol. 23, No. 6, pp. 761-768 (in Korean) 

10. AIAA Journal K. H. Lee 34 No. 5 1059 1996 10.2514/3.13187 Lee, K. H., Eom, I. S., Park, G. J., and Lee, W. I., 1996, “Robust Design for Unconstrained Optimization Problems Using the Taguchi Method,”AIAA Journal, Vol. 34, No. 5, pp. 1059-1063 

    상세보기

11. LG Electronics, 1993,An Application Guide of the Taguchi Method (in Korean) 

12. M. S. Phadke 1989 Quality Engineering Using Robust Design Phadke, M. S., 1989,Quality Engineering Using Robust Design, Prentice Hall, Englewood Cliffs, New Jersey 

13. Pack, J., Kovch, I., Machin, R., Zhou, J. H., and Riley, S., 1993, “Systematic Design of Automotive Weatherstrips Using Taguchi Robust Design Methods,” Case Studies & Tutorials,Eleventh Annual Taguchi Symposium, November 2-4, Costa Mesa, California, American Supplier Institute 

14. Wilkins J., 1993, “Introduction to Quality Engineering,” Case Studies & Tutorials, Eleventh Annual Taguchi Symposium,November 2-4, Costa Mesa, California, American Supplier Institute