참고문헌 (107)

1. Mat Sci Eng a-Struct Al-Samman 490 411 2008 10.1016/j.msea.2008.02.004 Dynamic recrystallization during high temperature deformation of magnesium 

   상세보기

2. J Eng Mater Technol-Trans Asme Anand 104 12 1982 10.1115/1.3225028 Constitutive-Equations for the Rate-Dependent Deformation of Metals at Elevated-Temperatures 

   상세보기

3. Mech Mater Armstrong 17 319 1994 10.1016/0167-6636(94)90069-8 Dislocation Mechanics Aspects of Plastic Instability and Shear Banding 

   상세보기

4. Metall Trans A Ayres 10 41 1979 10.1007/BF02686404 Strain and Strain-Rate Hardening Effects in Punch Stretching of 5182-0 Aluminum at Elevated-Temperatures 

   상세보기

5. J Mech Work Technol Baragar 14 295 1987 10.1016/0378-3804(87)90015-5 The High-Temperature and High Strain-Rate Behavior of a Plain Carbon and an Hsla Steel 

   상세보기

6. Int J Mech Sci Benaarbia 136 36 2018 10.1016/j.ijmecsci.2017.12.008 Unified viscoplasticity modelling and its application to fatigue-creep behaviour of gas turbine rotor 

   상세보기

7. Int J Plast Benaarbia 107 100 2018 10.1016/j.ijplas.2018.03.015 A thermodynamically-based viscoelastic-viscoplastic model for the high temperature cyclic behaviour of 9-12% Cr steels 

   상세보기

8. Trans Nonferrous Met Soc China Berge 25 1 2015 10.1016/S1003-6326(15)63572-5 Influence of temperature and strain rate on flow stress behavior of twin-roll cast, rolled and heat-treated AZ31 magnesium alloys 

   상세보기

9. Berstad 131 2004 7th ESAFORM Conference on Material Forming, Trondheim, FEM and a microstructure based work-hardening model used to calculate FLCs, In: storen, S. (ed.): proc 

10. Mater Prot Bluhm 5 45 1966 Fracture in a Tensile Specimen 

11. J Appl Mech-T Asme Bodner 42 385 1975 10.1115/1.3423586 Constitutive Equations for Elastic-Viscoplastic Strain-Hardening Materials 

    상세보기

12. Int J Plast Brown 5 95 1989 10.1016/0749-6419(89)90025-9 An Internal Variable Constitutive Model for Hot-Working of Metals 

    상세보기

13. Int J Plast Chaboche 24 1642 2008 10.1016/j.ijplas.2008.03.009 A review of some plasticity and viscoplasticity constitutive theories 

    상세보기

14. J Alloys Compd Chen 805 138 2019 10.1016/j.jallcom.2019.07.015 Effect of shear deformation on plasticity, recrystallization mechanism and texture evolution of Mg-3Al-1 Zn alloy sheet: experiment and coupled finite element-VPSC simulation 

    상세보기

15. Int J Fatigue Chen 112 70 2018 10.1016/j.ijfatigue.2018.03.010 Creep and fatigue behavior of 316 L stainless steel at room temperature: experiments and a revisit of a unified viscoplasticity model 

    상세보기

16. Int J Plast Cho 112 123 2019 10.1016/j.ijplas.2018.08.009 A unified static and dynamic recrystallization Internal State Variable (ISV) constitutive model coupled with grain size evolution for metals and mineral aggregates 

    상세보기

17. J Mech Phys Solids Chu 32 197 1984 10.1016/0022-5096(84)90008-5 A 3-Dimensional Model of Anisotropic Hardening in Metals and Its Application to the Analysis of Sheet-Metal Formability 

    상세보기

18. Int J Plast Chung 27 52 2011 10.1016/j.ijplas.2010.03.006 Formability of TWIP (twinning induced plasticity) automotive sheets 

    상세보기

19. Int J Plast Chung 58 3 2014 10.1016/j.ijplas.2014.03.009 Forming limit criterion for ductile anisotropic sheets as a material property and its deformation path insensitivity. Part I: deformation path insensitive formula based on theoretical models 

    상세보기

20. Int J Plast Chung 58 35 2014 10.1016/j.ijplas.2014.03.014 Forming limit criterion for ductile anisotropic sheets as a material property and its deformation path insensitivity, Part II: boundary value problems 

    상세보기

21. Int J Plast Chung 27 1485 2011 10.1016/j.ijplas.2011.01.007 A modified damage model for advanced high strength steel sheets 

    상세보기

22. Int J Plast Chung 45 61 2013 10.1016/j.ijplas.2012.10.012 Consistency condition of isotropic-kinematic hardening of anisotropic yield functions with full isotropic hardening under monotonously proportional loading 

    상세보기

23. Cribb 91 1979 

24. Eng Fract Mech Dancette 87 48 2012 10.1016/j.engfracmech.2012.03.004 A finite element model for the prediction of Advanced High Strength Steel spot welds fracture 

    상세보기

25. eFunda, 2016. http://www.efunda.com/. 

26. Proc Am Soc Test Mater Fields 57 1259 1957 Determination of strain hardening characteristics by torsion testing. ASTM 

27. Acta Metall Mater Follansbee 36 81 1988 10.1016/0001-6160(88)90030-2 A Constitutive Description of the Deformation of Copper Based on the Use of the Mechanical Threshold Stress as an Internal State Variable 

    상세보기

28. Garofalo 1965 Fundamentals of creep and creep-rupture in metals 

29. J Eng Mater Technol-Trans Asme Ghosh 99 264 1977 10.1115/1.3443530 The Influence of Strain Hardening and Strain-Rate Sensitivity on Sheet Metal Forming 

    상세보기

30. Trans. Nonferrous Met Soc China Guan 18 315 2008 10.1016/S1003-6326(08)60055-2 Flow stress and microstructure evolution of semicontinuous casting AZ70 Mg-alloy during hot compression deformation 

    상세보기

31. J Eng Mater Technol-Trans Asme Gurson 99 2 1977 10.1115/1.3443401 Continuum theory of ductile rupture by void nucleation and growth: part 1 - yield criteria and flow rules for porous ductile media 

    상세보기

32. Int J Plast Habib 95 163 2017 10.1016/j.ijplas.2017.04.006 Anisotropy, tension-compression asymmetry and texture evolution of a rare-earth-containing magnesium alloy sheet, ZEK100, at different strain rates and temperatures: experiments and modeling 

    상세보기

33. J. Int Metals Hardwick 90 17 1961 Structural Changes During the Deformation of Copper, Aluminum and Nickel at High Temperatures and High Strain Rates 

34. J Eng Mater Technol-Trans Asme Hartley 105 162 1983 10.1115/1.3225636 Constitutive-Equations for Large Plastic-Deformation of Metals 

    상세보기

35. Proc R Soc Lon Ser-A Hill 193 281 1948 10.1098/rspa.1948.0045 A Theory of the Yielding and Plastic Flow of Anisotropic Metals 

    상세보기

36. T Am I Min Met Eng Hollomon 162 268 1945 Tensile Deformation 

37. Comp Mater Sci Hou 50 147 2010 10.1016/j.commatsci.2010.07.018 A modified Johnson-Cook constitutive model for Mg-Gd-Y alloy extended to a wide range of temperatures 

    상세보기

38. Johnson 541 1983 Proceedings of the 7th International Symposium on Ballistics A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures 

39. Int J Plast Kabirian 55 232 2014 10.1016/j.ijplas.2013.11.001 Negative to positive strain rate sensitivity in 5xxx series aluminum alloys: experiment and constitutive modeling 

    상세보기

40. Int J Plast Khan 8 397 1992 10.1016/0749-6419(92)90057-J Experimental and Theoretical-Study of Mechanical-Behavior of 1100-Aluminum in the Strain Rate Range 10(-5)-10(4)S(-1) 

    상세보기

41. Int J Plast Khan 15 1089 1999 10.1016/S0749-6419(99)00030-3 Behaviors of three BCC metal over a wide range of strain rates and temperatures: experiments and modeling 

    상세보기

42. Metals and Mater Int Kim 21 874 2015 10.1007/s12540-015-5141-z Inverse Characterization Method for Mechanical Properties of Strain/Strain-Rate/Temperature/Temperature-History Dependent Steel Sheets and Its Application for Hot Press Forming 

    상세보기

43. potentials for anisotropic cubic metals Kim 24 2298 2008 An elasto-plastic constitutive model with plastic strain rate 

44. Macromolecules Kim 42 3147 2009 10.1021/ma900341m End Groups Adjusting the Molecular Nano-Assembly Pattern and Thermal Gelation of Polypeptide Block Copolymer Aqueous Solution 

    상세보기

45. J Mech Phys Solids Klepaczko 34 29 1986 10.1016/0022-5096(86)90004-9 On Rate Sensitivity of Fcc Metals, Instantaneous Rate Sensitivity and Rate Sensitivity of Strain-Hardening 

    상세보기

46. Prog Mater Sci Kocks 19 1 1975 Thermodynamics and Kinetics of Slip 

47. Int J Mech Sci Koh 93 204 2015 10.1016/j.ijmecsci.2015.02.001 Characterization of mechanical property of magnesium AZ31 alloy sheets for warm temperature forming 

    상세보기

48. Mater Trans Koike 44 445 2003 10.2320/matertrans.44.445 Grain-boundary sliding in AZ31 magnesium alloys at room temperature to 523 K 

    상세보기

49. Int J Mech Sci Kyaw 115-116 168 2016 10.1016/j.ijmecsci.2016.06.014 Determination of material parameters for a unified viscoplasticity-damage model for a P91 power plant steel 

    상세보기

50. Int J Plast Lee 126 2020 10.1016/j.ijplas.2019.10.006 An enhanced distortional-hardening-based constitutive model for hexagonal close-packed metals: application to AZ31B magnesium alloy sheets at elevated temperatures 

    상세보기

51. Metallurgical and Materials Transactions A Lee 50 2720 2019 10.1007/s11661-019-05213-0 Pulsed Electric Current V-Bending Springback of AZ31B Magnesium Alloy Sheets 

    상세보기

52. Int J Plast Lee 94 74 2017 10.1016/j.ijplas.2017.02.002 Distortional hardening concept for modeling anisotropic/asymmetric plastic behavior of AZ31B magnesium alloy sheets 

    상세보기

53. Int J Thermophys Lee 34 2343 2013 10.1007/s10765-011-1145-1 Thermal Conductivity of Magnesium Alloys in the Temperature Range from ？125 °C to 400 °C 

    상세보기

54. Acta MaterialiaActa Mater Lee 59 6809 2011 10.1016/j.actamat.2011.07.040 On the origin of dynamic strain aging in twinning-induced plasticity steels 

    상세보기

55. Met Mater Int Leem 24 2018 10.1007/s12540-018-0024-8 Identification of Dynamic Flow Stress Curves Using the Virtual Fields Methods: theoretical Feasibility Analysis 

    상세보기

56. Lemaitre 1971 Sur la determination des lois de comportement des materiaux elasto-viscoplastiques 

57. Lemoine 269 2007 10th ESAFORM conference on material forming Behavior laws and their influences on numerical prediction 

58. Int J Mech Sci Li 150 90 2019 10.1016/j.ijmecsci.2018.09.046 Unified viscoplastic constitutive model under axial-torsional thermo-mechanical cyclic loading 

    상세보기

59. Int J Plast Liang 15 963 1999 10.1016/S0749-6419(99)00021-2 A critical review of experimental results and constitutive models for BCC and FCC metals over a wide range of strain rates and temperatures 

    상세보기

60. Acta Mater Liang 88 170 2015 10.1016/j.actamat.2015.01.013 Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steel 

    상세보기

61. Mat Sci Eng a-Struct Lin 527 6980 2010 10.1016/j.msea.2010.07.061 A modified Johnson-Cook model for tensile behaviors of typical high-strength alloy steel 

    상세보기

62. J Mech Phys Solids Lindholm 12 317 1964 10.1016/0022-5096(64)90028-6 Some Experiments with the Split Hopkinson Pressure Bar 

    상세보기

63. Comp Mater Sci Liu 41 375 2008 10.1016/j.commatsci.2007.04.024 Modelling of flow stress characterizing dynamic recrystallization for magnesium alloy AZ31B 

    상세보기

64. Comp Mater Sci Liu 41 375 2008 10.1016/j.commatsci.2007.04.024 Modelling of flow stress characterizing dynamic recrystallization for magnesium alloy AZ31B 

    상세보기

65. Metall Trans Ludwigso 2 2825 1971 10.1007/BF02813258 Modified Stress-Strain Relation for Fcc Metals and Alloys 

    상세보기

66. Phys Z Ludwik 10 411 1909 On the influence of the speed of deformation in case of enduring deformations with special regard to the after-effects 

67. Acta Metall Mater Luton 17 1033 1969 10.1016/0001-6160(69)90049-2 Dynamic Recrystallization in Nickel and Nickel-Iron Alloys during High Temperature Deformation 

    상세보기

68. Met Mater Int Ma 16 427 2010 10.1007/s12540-010-0613-7 Numerical and experimental evaluation of the impact performance of advanced high-strength steel sheets based on a damage model 

    상세보기

69. Int J Plast Madivala 115 178 2019 10.1016/j.ijplas.2018.11.015 Anisotropy and strain rate effects on the failure behavior of TWIP steel: a multiscale experimental study 

    상세보기

70. J Appl Mech McClintock 35 363 1968 10.1115/1.3601204 A Criterion for Ductile Fracture by the Growth of Holes 

    상세보기

71. Acta Metall Mater Mecking 29 1865 1981 10.1016/0001-6160(81)90112-7 Kinetics of Flow and Strain-Hardening 

    상세보기

72. Mat Sci Eng a-Struct Mirzadeh 527 1160 2010 10.1016/j.msea.2009.09.060 Flow stress prediction at hot working conditions 

    상세보기

73. Int J Plast Mohebbi 90 167 2017 10.1016/j.ijplas.2017.01.003 Development of equations for strain rate sensitivity of UFG aluminum as a function of strain rate 

    상세보기

74. Mech Mater Molinari 37 737 2005 10.1016/j.mechmat.2004.07.005 Constitutive modeling of high-strain-rate deformation in metals based on the evolution of an effective microstructural length 

    상세보기

75. Nandedkar 437 1999 Proc. of the NUMISHEET 1999 Conference Prediction of forming limits incorporating work-hardening behavior, In: elin, J.C., Picart, P. (eds) 

76. International Journal of Material Forming. Noh 2014 Mechanical Property of Magnesium Alloy Sheet with Hardening Deterioration at Warm Temperatures and its Application for Failure Analysis: part I - Property Characterization 

77. Numisheet 2011 The 8th Internatinal Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes Benchmark2: simulation of the Cross-shaped Cup Deep-drawing Process 

78. Int J Solids Struct Park 49 3582 2012 10.1016/j.ijsolstr.2012.02.015 Non-associated flow rule with symmetric stiffness modulus for isotropic-kinematic hardening and its application for earing in circular cup drawing 

    상세보기

79. Acta Mater Picu 52 3447 2004 10.1016/j.actamat.2004.03.042 A mechanism for the negative strain-rate sensitivity of dilute solid solutions 

    상세보기

80. Mat Sci Eng a-Struct Picu 390 334 2005 10.1016/j.msea.2004.08.029 Strain rate sensitivity of the commercial aluminum alloy AA5182-O 

    상세보기

81. Int J Plast Puchi-Cabrera 108 70 2018 10.1016/j.ijplas.2018.04.013 Plausible extension of Anand’s model to metals exhibiting dynamic recrystallization and its experimental validation 

    상세보기

82. Chinese Phys Lett Qin 26 2009 Mechanism of Strain Rate Effect Based on Dislocation Theory 

83. Mat Sci Eng a-Struct Quan 528 8051 2011 10.1016/j.msea.2011.07.064 Constitutive modeling for the dynamic recrystallization evolution of AZ80 magnesium alloy based on stress-strain data 

    상세보기

84. J Mech Phys Solids Rice 17 1969 10.1016/0022-5096(69)90033-7 On Ductile Enlargement of Voids in Triaxial Stress Fields 

    상세보기

85. Int J Plast Roth 56 19 2014 10.1016/j.ijplas.2014.01.003 Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: experiments and modeling 

    상세보기

86. Int J Solids Struct Rusinek 44 5611 2007 10.1016/j.ijsolstr.2007.01.015 Constitutive relations in 3-D for a wide range of strain rates and temperatures - Application to mild steels 

    상세보기

87. Comp Mater Sci Safaei 81 15 2014 10.1016/j.commatsci.2013.05.035 An evolutionary anisotropic model for sheet metals based on non-associated flow rule approach 

    상세보기

88. Acta Metall Mater Sellars 14 1136 1966 10.1016/0001-6160(66)90207-0 On the mechanism of hot deformation 

    상세보기

89. Met Mater Int Seok 21 54 2015 10.1007/s12540-015-1007-7 Fracture Criterion for AZ31 Mg Alloy Plate at Elevated Temperature 

    상세보기

90. J Eng Mater Technol-Trans Asme Shin 132 2010 10.1115/1.4000225 A Phenomenological Constitutive Equation to Describe Various Flow Stress Behaviors of Materials in Wide Strain Rate and Temperature Regimes 

    상세보기

91. J Mater Process Technol Sing 63 105 1997 10.1016/S0924-0136(96)02608-8 Role of strain-hardening laws in the prediction of forming limit curves 

    상세보기

92. J Appl Phys Steinberg 51 1498 1980 10.1063/1.327799 A Constitutive Model for Metals Applicable at High-Strain Rate 

    상세보기

93. J Phys-Paris Steinberg 49 433 1988 10.1051/jphyscol:1988362 A Constitutive Model for Strain Rates from 10 to 4 to 106 S-1 

    

94. Int J Plast Sung 26 1746 2010 10.1016/j.ijplas.2010.02.005 A plastic constitutive equation incorporating strain, strain-rate, and temperature 

    상세보기

95. J Mech Phys Solids Swift 1 1 1952 10.1016/0022-5096(52)90002-1 Plastic Instability under Plane Stress 

    상세보기

96. Takuda 330 2006 Proceedings of the 7 International Conference on Magnesium Alloys and Their Applications Change in Formability of AZ31 and AZ61 from Room to Elevated Temperatures 

97. Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character Taylor 145 362 1934 The Mechanism of Plastic Deformation of Crystals. Part I. Theoretical 

    상세보기

98. Acta Metall Mater Tvergaard 32 157 1984 10.1016/0001-6160(84)90213-X Analysis of the cup-cone fracture in a round tensile bar 

    상세보기

99. J I Met Voce 74 537 1948 The Relationship between Stress and Strain for Homogeneous Deformation 

100. Mat Sci Eng a-Struct Vural 520 56 2009 10.1016/j.msea.2009.05.026 Experimental analysis and constitutive modeling for the newly developed 2139-T8 alloy 

     상세보기

101. Int J Plast Wang 107 207 2018 10.1016/j.ijplas.2018.04.005 Strain rate sensitivities of deformation mechanisms in magnesium alloys 

     상세보기

102. Materials Research Express Wei 6 2019 10.1088/2053-1591/ab45e0 Hot tensile deformation constitutive equation and processing map of AZ61Ce magnesium alloy sheet 

     상세보기

103. Int J Plast Xu 106 129 2018 10.1016/j.ijplas.2018.03.005 In-situ micro-tensile investigation of strain rate response along <100>and <110>directions in single crystal nickel 

     상세보기

104. Comp Mater Sci Yoshida 46 459 2009 10.1016/j.commatsci.2009.03.034 Improvement in formability of aluminum alloy sheet by enhancing geometrical hardening 

     상세보기

105. Int J Plast Zang 59 84 2014 10.1016/j.ijplas.2014.03.015 Measurement of the Bauschinger behavior of sheet metals by three-point bending springback test with pre-strained strips 

     상세보기

106. J Appl Phys Zerilli 61 1816 1987 10.1063/1.338024 Dislocation-Mechanics-Based Constitutive Relations for Material Dynamics Calculations 

     상세보기

107. Int J Mech Sci Zhou 133 457 2017 10.1016/j.ijmecsci.2017.09.006 A damage-coupled unified viscoplastic constitutive model for prediction of forming limits of 22MnB5 at high temperatures 

     상세보기

활용도 Top5 논문

더보기

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.