[논문]Robotic laser sensing and laser mirror excitation for pulse-echo scanning inspection of fixed composite structures with non-planar geometries

Ahmed, Hasan; Mohsin, Ali; Hong, Seung-Chan; Lee, Jung-Ryul; Ihn, Jeong-Beom

doi:10.1016/j.measurement.2021.109109

[해외논문] Robotic laser sensing and laser mirror excitation for pulse-echo scanning inspection of fixed composite structures with non-planar geometries

Measurement : journal of the International Measurement Confederation, v.176, 2021년, pp.109109 -

Ahmed, Hasan (Department of Aerospace Engineering, Korean Advanced Institute of Science and Technology) , Mohsin, Ali (Department of Aerospace Engineering, Korean Advanced Institute of Science and Technology) , Hong, Seung-Chan (Department of Aerospace Engineering, Korean Advanced Institute of Science and Technology) , Lee, Jung-Ryul (Department of Aerospace Engineering, Korean Advanced Institute of Science and Technology) , Ihn, Jeong-Beom (Structures Technology, Boeing Research and Technology)

Abstract ▼ AI-Helper

Abstract This paper proposes a system for a laser ultrasonic inspection of fixed non-planar composite structures. A pulse-echo configuration is used by which both the sensing and excitation lasers hit the same point on the structure, utilizing bulk waves for a through-the-thickness defect evaluation. A high signal-to-noise ratio is ensured by mounting a laser Doppler vibrometer (LDV), used as the sensing laser, on a 6 degree-of-freedom robot arm, thus allowing the correct distance and angle of the laser incident on the inspected structure to be maintained throughout the scan. The excitation laser is steered separately through a laser mirror scanner (LMS) to keep the robot payload sufficiently low, allowing the use of a lightweight portable robot arm. This robot arm can be mounted on a moveable platform suitable for in-situ inspections. An RGB-D camera is used for imaging the structure in front of the system, and a scan area with the required size can be delimited on the image produced by the camera. A scan path for the robot arm and laser mirror scanner is automatically generated by keeping the shape and distance of the structure within the delimited scan area. A graphical user interface allows the control of all individual blocks and contains the necessary algorithms for image capture of a specimen, geometry calculations, scan-path generation, signal acquisition, signal processing, and display of the results. This is a multithreaded software, ensuring a fast calculation of the structural geometry and scan path prior to the inspection and real-time updating of the results during the inspection. Composite specimens consisting of radial and conic sections with subsurface defects were inspected using the system. The test results show that the system is extremely reliable in detecting defects, particularly in the non-planar parts of the specimen. Highlights Laser ultrasonic inspection of non-planar structures in a pulse-echo configuration. Robot-arm based sensing laser for optimal angle and distance control. Separate, but synchronized, excitation laser steering, to reduce robot-arm payload. Distortion removal of laser mirror scanner with a novel robot-assisted method. Automatic generation of inspection scan-path regardless of structure’s shape.

Keyword

참고문헌 (27)

C.B. Scruby, L.E. Drain, Laser ultrasonics: techniques and applications, Hilger, Bristol, 1990, pp. xiii, 447 p.
K. T., Ultrasonic and electromagnetic NDE for structure and material characterization, CRC Press, 2018.
Nondestruct. Test. Eval. Petcher 1 2016 Mode mixing in shear horizontal ultrasonic guided waves
NDT & E Int. Lee 44 8 680 2011 10.1016/j.ndteint.2011.07.005 A time-of-flight mapping method for laser ultrasound guided in a pipe and its application to wall thinning visualization

상세보기
10.3390/s18113958 M. Abbas, M. Shafiee, Structural health monitoring (SHM) and determination of surface defects in large metallic structures using ultrasonic guided waves, Sensors 3958 (2018).

상세보기
NDT & E Int. Flynn 59 1 2013 10.1016/j.ndteint.2013.04.003 Structural imaging through local wavenumber estimation of guided waves

상세보기
Rose 2014 Ultrasonic guided waves in solid media
Compos. Struct. Lee 204 395 2018 10.1016/j.compstruct.2018.07.124 Composite repair patch evaluation using pulse-echo laser ultrasonic correlation mapping method

상세보기
Ultrasonics Zhang 94 411 2019 10.1016/j.ultras.2018.06.005 Detection of disbonds in multi-layer bonded structures using the laser ultrasonic pulse-echo mode

상세보기
Smart Struct. Syst. Abbas 22 223 2018 High-speed angular-scan pulse-echo ultrasonic propagation imager for in situ non-destructive evaluation
Hong 2016 Active and Passive Smart Structures and Integrated Systems Proc of SPIE Composite NDE using full-field pulse-echo ultrasonic propagation imaging system
Compos. Struct.res Lee 236 111871 2020 10.1016/j.compstruct.2020.111871 Filament-wound composite pressure vessel inspection based on rotational through-transmission laser ultrasonic propagation imaging

상세보기
Opt. Lasers Eng. Hong 99 58 2017 10.1016/j.optlaseng.2016.08.010 Three dimensional evaluation of aluminum plates with wall-thinning by full-field pulse-echo laser ultrasound

상세보기
L.Z. Eng, Hands-on GUI programming with C++ and Qt5: Build stunning cross-platform applications and widgets with the most powerful GUI framework, 2018.
Struct. Health Monitor. Ahmed 2019 Development of autonomous target recognition and scanning technology for pulse-echo ultrasonic propagation imager
Measurement Morozov 122 284 2018 10.1016/j.measurement.2018.02.020 Off-line scan path planning for robotic NDT

상세보기
10.1016/j.rcim.2017.06.007 Xiao Zhen, Y. Yong, X.C. Guang, X.D. Guo, L.F. Fang, L.X. Liang, Profile tracking with ultrasonic alignment for automatic Non-destructive testing of complex structures, Robot. Comput.-Integr. Manuf. 49 (2018) 134-142.

상세보기
AIP Conf. Proc. Mineo 1806 2017 10.1063/1.4974567 Flexible integration of robotics, ultrasonics and metrology for the inspection of aerospace components
10.1088/0957-0233/14/8/336 S. Vanlanduit, P. Guillaume, B. Cauberghe, P. Verboven, An automatic position calibration method for the scanning laser Doppler vibrometer, Meas. Sci. Technol. 14 (8) (2003).

상세보기
Opt. Lasers Eng. Sels 99 23 2017 10.1016/j.optlaseng.2016.09.007 3D model assisted fully automated scanning laser Doppler vibrometer measurements

상세보기
10.1109/IROS.2012.6385999 S. Holzer, R.B. Rusu, M. Dixon, S. Gedikli, N. Navab, Adaptive neighborhood selection for real-time surface normal estimation from organized point cloud data using integral images, in: IEEE/RSJ International Conference on Intelligent Robots and Systems, Vilamoura, 2012, pp. 2684-2689.
10.1109/ROBOT.2009.5152493 K. Klasing, D. Althoff, D. Wollherr, M. Buss, Comparison of surface normal estimation methods for range sensing applications, in: IEEE International Conference on Robotics and Automation (ICRA), Kobe, Japan, 2009.
X. Lu, Y. Liu, K. Li, Fast 3D line segment detection from unorganized point cloud, in: Presented at the IEEE Conference on Computer Vision Pattern Recognition, 15-21 June, 2019.
Marshall 2004 Handbook of optical and laser scanning
P. Eisert, K. Polthier, J. Hornegger, A mathematical model and calibration procedure for galvanometric laser scanning systems, in: Vision, Modeling, and Visualization, 2011, pp. 207-214.
Opt. Lasers Eng. Ortega Delgado 86 106 2016 10.1016/j.optlaseng.2016.05.016 Reducing field distortion for galvanometer scanning system using a vision system

상세보기
10.3390/s19061353 W. Zhang, W. Guo, C. Zhang, S. Zhao, An online calibration method for a galvanometric system based on wavelet kernel ELM, Sensors 19(6) (2019) 1353.

상세보기

LOADING...

활용도 분석정보

상세보기

다운로드

내보내기

활용도 Top5 논문

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.

원문 URL 링크

DOI : 10.1016/j.measurement.2021.109109
Elsevier : 저널 > 논문

*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.

저작권 관리 안내

내보내기 메뉴

내보내기 구분

파일저장
인쇄
메일전송

구성항목

기본정보
상세정보

관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관

저장형식

Text(ASCII format)
Excel format
RefWorks Direct Export
RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley

메일정보

받는사람 (필수): @
보내는사람 (선택): @
제목
내용: KISTI 검색결과 이메일 서비스

안내

총 건의 자료가 검색되었습니다.

다운받으실 자료의 인덱스를 입력하세요. (1-10,000)

검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다.

데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요)

다운로드 파일은 UTF-8 형태로 저장됩니다.
파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오.

Text(ASCII format)
Excel format

표제어: PCR

동의어: Packet Collision Rate

용어 설명 출처 목록 (6)

용어 설명: PCR은 세균 특이성이 있는 primer를 이용하여 적은 수의 세균이 있을지라도 쉽게 검출할 수 있는 유용한 방법이며, 이를 이용하여 구강 내 치면세균막이나 타액에서 직접 세균을 검출할 수 있게 되었다[8].

AI-Helper ※ AI-Helper는 을 사용합니다.

AI-Helper

안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

연합인증