참고문헌 (21)

1. 10.1016/B978-0-08-096527-7.00006-4 

   

2. Cardarelli, F., “Ceramics, Refractories, and Glasses,” Materials Handbook: A Concise Desktop Reference, pp. 593-689, 2008. 

3. Eberle, G., Wegener, K.. Ablation Study of WC and PCD Composites Using 10 Picosecond and 1 Nanosecond Pulse Durations at Green and Infrared Wavelengths. Physics procedia, vol.56, 951-962.

   상세보기

4. Urbina, J.P.C., Daniel, C., Emmelmann, C.. Experimental and Analytical Investigation of Cemented Tungsten Carbide Ultra-Short Pulse Laser Ablation. Physics procedia, vol.41, 752-758.

   상세보기

5. 10.1117/12.413990 

   

6. 10.1007/s003390050357 

   

7. Le Harzic, R., Huot, N., Audouard, E., Jonin, C., Laporte, P., Valette, S., Fraczkiewicz, A., Fortunier, R.. Comparison of heat-affected zones due to nanosecond and femtosecond laser pulses using transmission electronic microscopy. Applied physics letters, vol.80, no.21, 3886-3888.

   상세보기

8. Bogaerts, Annemie, Chen, Zhaoyang. Effect of laser parameters on laser ablation and laser-induced plasma formation: A numerical modeling investigation. Spectrochimica acta. Part B, Atomic spectroscopy, vol.60, no.9, 1280-1307.

   상세보기

9. Liu, J. M.. Simple technique for measurements of pulsed Gaussian-beam spot sizes. Optics letters, vol.7, no.5, 196-.

   상세보기

10. Di Niso, Francesca, Gaudiuso, Caterina, Sibillano, Teresa, Mezzapesa, Francesco Paolo, Ancona, Antonio, Lugarà, Pietro Mario. Role of heat accumulation on the incubation effect in multi-shot laser ablation of stainless steel at high repetition rates. Optics express, vol.22, no.10, 12200-.

    상세보기

11. Chichkov, B. N., Momma, C., Nolte, S., Alvensleben, F., Tünnermann, A.. Femtosecond, picosecond and nanosecond laser ablation of solids. Applied physics. A, Materials science & processing, vol.63, no.2, 109-115.

    상세보기

12. Xu, Gang, Dai, Yutang, Cui, Jianlei, Xiao, Xiang, Mei, Huaping, Li, Hongli. Simulation and experiment of femtosecond laser polishing quartz material. Integrated ferroelectrics, vol.181, no.1, 60-69.

    상세보기

13. Domke, M., Matylitsky, V., Stroj, S.. Surface ablation efficiency and quality of fs lasers in single-pulse mode, fs lasers in burst mode, and ns lasers. Applied surface science, vol.505, 144594-.

    상세보기

14. 10.1201/b15030-4 

    

15. Wang, Wenjun, Mei, Xuesong, Jiang, Gedong. Control of microstructure shape and morphology in femtosecond laser ablation of imprint rollers. International journal of advanced manufacturing technology, vol.41, no.5, 504-512.

    상세보기

16. Zhao, Wanqin, Wang, Wenjun, Jiang, Gedong, Li, Ben Q., Mei, Xuesong. Ablation and morphological evolution of micro-holes in stainless steel with picosecond laser pulses. International journal of advanced manufacturing technology, vol.80, no.9, 1713-1720.

    상세보기

17. Sipe, J. E., Young, Jeff F., Preston, J. S., van Driel, H. M.. Laser-induced periodic surface structure. I. Theory. Physical review. B, Condensed matter, vol.27, no.2, 1141-1154.

    상세보기

18. Racine, Vincent, Le Barh, Mickael, Killaire, Graham, Weck, Arnaud. Effect of polarization on ripple formation in deep femtosecond laser machined cavities. Journal of materials processing technology, vol.271, 162-171.

    상세보기

19. Mostafa, Ayman M., Hameed, Mohamed F., Obayya, Salah S.. Effect of laser shock peening on the hardness of AL-7075 alloy. Journal of King Saud University. Science, vol.31, no.4, 472-478.

    상세보기

20. Wang, Qingsong, Jiang, Lan, Sun, Jingya, Pan, Changji, Han, Weina, Wang, Guoyan, Zhang, Hao, Grigoropoulos, Costas P., Lu, Yongfeng. Enhancing the expansion of a plasma shockwave by crater-induced laser refocusing in femtosecond laser ablation of fused silica. Photonics research, vol.5, no.5, 488-.

    상세보기

21. Shi, Xuesong, Xu, Xuefeng. Laser fluence dependence of ripple formation on fused silica by femtosecond laser irradiation. Applied physics. A, Materials science & processing, vol.125, no.4, 256-.

    상세보기