참고문헌 (13)

1. Apai, Dániel, Milster, Tom D., Kim, Dae Wook, Bixel, Alex, Schneider, Glenn, Liang, Ronguang, Arenberg, Jonathan. A Thousand Earths: A Very Large Aperture, Ultralight Space Telescope Array for Atmospheric Biosignature Surveys. The Astronomical journal, vol.158, no.2, 83-.

   상세보기

2. 10.1117/12.2529428 

   

3. Lane, B.M., Shi, M., Dow, T.A., Scattergood, R.. Diamond tool wear when machining Al6061 and 1215 steel. Wear: An international journal on the science and technology of friction, lubrication and wear, vol.268, no.11, 1434-1441.

   상세보기

4. Liu, X., Ding, X., Lee, L., Fang, F., and Lim, G., “Direct Single Point Diamond Cutting of STAVAX Assisted with Ultrasonic Vibration to Produce Optical Quality Surface Finish,” Proc. of the ASPE Annual Meeting, pp. 67-70, 2003. 

5. Neo, K.S., Rahman, M., Li, X.P., Khoo, H.H., Sawa, M., Maeda, Y.. Performance evaluation of pure CBN tools for machining of steel. Journal of materials processing technology, vol.140, no.1, 326-331.

   상세보기

6. Krolczyk, G., Legutko, S., and Stoi, A., “Influence of Cutting Parameters and Conditions onto Surface Hardness of Duplex Stainless Steel after Turning Process,” Tehniki Vjesnik, Vol. 20, No. 6, pp. 1077-1080, 2013. 

7. Revankar, Goutam Devaraya, Shetty, Raviraj, Rao, Shrikantha Srinivas, Gaitonde, Vinayak Neelakanth. Analysis of surface roughness and hardness in titanium alloy machining with polycrystalline diamond tool under different lubricating modes. Materials research = Revista ibero-americana de materiais, vol.17, no.4, 1010-1022.

   상세보기

8. 전은채, 최환진, 이규민, 이윤희, 제태진, 김정환, 최두선. 겉보기 응력 개념에 기반한 공구각에 따른 비절삭저항 변화 분석. 한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, vol.13, no.2, 64-72.

   원문보기 상세보기

9. Lee, S. Y. and Kim, H. N., “Effects of Cutting Conditions on Surface Roughness in Turning,” Journal of the Korean Society for Precision Engineering, Vol. 18, No. 8, pp. 139-149, 2001. 

10. Yang, Zhichao, Zhu, Lida, Zhang, Guixiang, Ni, Chenbing, Lin, Bin. Review of ultrasonic vibration-assisted machining in advanced materials. International journal of machine tools & manufacture, vol.156, 103594-.

    상세보기

11. Jin, Masahiko, Murakawa, Masao. Development of a practical ultrasonic vibration cutting tool system. Journal of materials processing technology, vol.113, no.1, 342-347.

    상세보기

12. Nath, C., Rahman, M.. Effect of machining parameters in ultrasonic vibration cutting. International journal of machine tools & manufacture, vol.48, no.9, 965-974.

    상세보기

13. Song, Y. C., Tanaka, K., and Moriwaki, T., “Mirror Finishing of Co-Cr-Mo Alloy by Ultrasonic Elliptical Vibration Cutting Method,” Journal of the Korean Society for Precision Engineering, Vol. 25, No. 3, pp. 56-62, 2008.