최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국생산제조학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, v.27 no.6, 2018년, pp.499 - 504
Lee, Jisung , Oh, Min Chul , Lee, Se Hwan , Jeon, Yongho , Ahn, Byungmin
초록이 없습니다.
Lee, H. J., Park, S. H., Park, W. J., 2009, Characteristics of Fatigue Crack Growth for Camshaft Material Applied to High Frequence Induction Treatment, J. Ocean Eng. Technol., 23:3 46-52
Park, J. D., Kim, S. W., 2003, Current Status and Prospects of Induction Hardening Technology, Journal of the Korean Society for Heat Treatment, 16:4 224-231
10.2472/jsms.44.187 Tokaji, K., Ogawa, T., 1995, Fatigue Life Distribution and Its Simulation in Spheroidal Graphite Cast Irons, J. Soc. Mater. Sci., 44:497 187-193
10.1016/S0261-3069(01)00033-4 Kristoffersen, H., Vomacka, P., 2001, Influence of Process Parameters for Induction Hardening on Residual Stresses, Mater. Des., 22:8 637-644
10.1016/S0261-3069(02)00099-7 Totik, Y., Sadeler, R., Altun, H., Gavagali, M., 2003, The Effects of Induction Hardening on Wear Properties of AISI 4140 Steel in Dry Sliding Conditions, Mater. Des., 24:1 25-30
Koga, H., Kawasaki, K., Wamazaki, T., 2004, Recent Trends on Induction Heat Treatment, Journal of the Korean Society for Heat Treatment, 17:2 106-116
Suzuki, D., Yatsushiro, K., Shimizu, S., Sugita, Y., Saito, M., Kubota, K., 2009, Development of Induction Surface Hardening Process for Small Diameter Carbon Steel Specimens, JCPDS-ICDD, 569-576
10.1504/IJMMP.2008.022033 Lauralice, C. F. C., Xin, Y., Jiangeng, G., George, E. T., 2008, A Historical Overview of Steel Tempering Parameters, Int. J. Microstructure and Materials Properties, 3:4-5 474-525
Lee, J. H., Jeong, W. C., 2010, A Study on Mechanical Properties and Microstructure of Local-Hardening Heat-Treated Automotive Panel, Journal of the Korean Society for Heat Treatment, 23:6 301-308
※ AI-Helper는 부적절한 답변을 할 수 있습니다.