최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of remanufacturing, v.11 no.1, 2021년, pp.1 - 23
Kampker, Achim , Wessel, Saskia , Fiedler, Falko , Maltoni, Francesco
AbstractTraditional remanufacturing is characterized by disassembly of a core up to an optimal depth of disassembly and by the replacement of some parts in order to achieve the specifications and reliability of the original product. Because of the product architecture and the reliability characteris...
(2000) Directive 2000/53/EC on end-of life vehicles
(2003) DIN 8593-0. Fertigungsverfahren Fügen(8593)
(2008) Directive 2008/98/EC on Waste
J Power Sources A Barré 241 680 2013 10.1016/j.jpowsour.2013.05.040 Barré A, Deguilhem B, Grolleau S, Gérard M, Suard F, Riu D (2013) A review on lithium-ion battery ageing mechanisms and estimations for automotive applications. J Power Sources 241:680-689. https://doi.org/10.1016/j.jpowsour.2013.05.040
Becker J, Beverungen D, Winter M et al. (eds) Umwidmung und Weiterverwendung von Taktionsbatterien. Szenarien, Dienstleistungen und Entscheidungsunterstützung
J Energy Storage MJ Brand 1 7 2015 10.1016/j.est.2015.04.001 Brand MJ, Schmidt PA, Zaeh MF, Jossen A (2015) Welding techniques for battery cells and resulting electrical contact resistances. J Energy Storage 1:7-14. https://doi.org/10.1016/j.est.2015.04.001
J Power Sources J Cannarella 245 745 2014 10.1016/j.jpowsour.2013.06.165 Cannarella J, Arnold CB (2014) Stress evolution and capacity fade in constrained lithium-ion pouch cells. J Power Sources 245:745-751. https://doi.org/10.1016/j.jpowsour.2013.06.165
WEVJ A Das 9 2 22 2018 10.3390/wevj9020022 Das A, Li D, Williams D, Greenwood D (2018) Joining Technologies for Automotive Battery Systems Manufacturing. WEVJ 9(2):22. https://doi.org/10.3390/wevj9020022
Elektrische Kontakte, Werkstoffe und Anwendungen
Energy M Galeotti 89 678 2015 10.1016/j.energy.2015.05.148 Galeotti M, Cinà L, Giammanco C, Cordiner S, di Carlo A (2015) Performance analysis and SOH (state of health) evaluation of lithium polymer batteries through electrochemical impedance spectroscopy. Energy 89:678-686. https://doi.org/10.1016/j.energy.2015.05.148
J Electrochem Soc IA Hunt 163 9 A1846 2016 10.1149/2.0361609jes Hunt IA, Zhao Y, Patel Y, Offer J (2016) Surface cooling causes accelerated degradation compared to tab cooling for Lithium-ion pouch cells. J Electrochem Soc 163(9):A1846-A1852. https://doi.org/10.1149/2.0361609jes
Jan Philipp Schmidt Verfahren zur Charakterisierung und Modellierung von Lithium-Ionen Zellen
Batteries T Jansen 4 3 37 2018 10.3390/batteries4030037 Jansen T, Blass D, Hartwig S, Dilger K (2018) Processing of advanced battery materials-laser cutting of pure Lithium metal foils. Batteries 4(3):37. https://doi.org/10.3390/batteries4030037
J Eng Technol Manag MR Johnson 34 9 2014 10.1016/j.jengtecman.2013.11.002 Johnson MR, McCarthy IP (2014) Product recovery decisions within the context of extended producer responsibility. J Eng Technol Manag 34:9-28. https://doi.org/10.1016/j.jengtecman.2013.11.002
Kampker A (2016) Evaluation of a remanufacturing for Lithium ion batteries from electric cars. World Acad Sci Eng Technol 3(12)
10.1007/s35148-019-0050-y Kampker A (2019) Laserstrahlgeschweißte Batteriepackgehäuse für Elektrofahrzeuge. ATZ Worldwide: 74-78
J Clean Prod W Kerr 9 1 75 2001 10.1016/S0959-6526(00)00032-9 Kerr W, Ryan C (2001) Eco-efficiency gains from remanufacturing. J Clean Prod 9(1):75-81. https://doi.org/10.1016/S0959-6526(00)00032-9
Phys Procedia MR Kronthaler 39 213 2012 10.1016/j.phpro.2012.10.032 Kronthaler MR, Schloegl F, Kurfer J, Wiedenmann R, Zaeh MF, Reinhart G (2012) Laser cutting in the production of Lithium ion cells. Phys Procedia 39:213-224. https://doi.org/10.1016/j.phpro.2012.10.032
Lehner S Reliability assessment of lithium-ion battery systems with special emphasis on cell performance distribution. Dissertation, RWTH Aachen; Shaker Verlag GmbH
Lienemann C (2016) Evaluation of a remanufacturing for Lithium ion batteries from electric cars, Sydney
J Power Sources M Mathew 349 94 2017 10.1016/j.jpowsour.2017.03.010 Mathew M, Kong QH, McGrory J, Fowler M (2017) Simulation of lithium ion battery replacement in a battery pack for application in electric vehicles. J Power Sources 349:94-104. https://doi.org/10.1016/j.jpowsour.2017.03.010
Int J of Precis Eng and Manuf-Green Tech M Matsumoto 3 1 129 2016 10.1007/s40684-016-0016-4 Matsumoto M, Yang S, Martinsen K, Kainuma Y (2016) Trends and research challenges in remanufacturing. Int J of Precis Eng and Manuf-Green Tech 3(1):129-142. https://doi.org/10.1007/s40684-016-0016-4
Office P (2006) Directive 2006/66/EC on batteries and accumulators and waste batteries and accumulators and repealing directive 91/157/EEC. Batteries directive (2006/66/EC)
Procedia Manufacturing S Rohr 8 603 2017 10.1016/j.promfg.2017.02.077 Rohr S, Müller S, Baumann M, Kerler M, Ebert F, Kaden D, Lienkamp M (2017) Quantifying uncertainties in reusing Lithium-ion batteries from electric vehicles. Procedia Manufacturing 8:603-610. https://doi.org/10.1016/j.promfg.2017.02.077
Schmidt P (2015) Laserstrahlschweißen elektrischer Kontakte von Lithium-Ionen-Batterien in Elektro- und Hybridfahrzeugen. Dissertation, Technische Universität München
ATZ Automobiltech Z R Singer 120 1 100 2018 10.1007/s35148-017-0167-9 Singer R, Fleischer J (2018) Demontagegerechtes Batteriemodul. ATZ Automobiltech Z 120(1):100-103
ATZ Automobiltech Z R Singer 120 1 80 2018 10.1007/s35148-017-0167-9 Singer R, Fleischer J (2018) Demountable battery module. ATZ Automobiltech Z 120(1):80-83
J Ind Ecol VM Smith 8 1-2 193 2004 10.1162/1088198041269463 Smith VM, Keoleian GA (2004) The value of remanufactured engines: life-cycle environmental and economic perspectives. J Ind Ecol 8(1-2):193-221. https://doi.org/10.1162/1088198041269463
Res Valid Using Analytical Hierarchical Process J Cleaner Product R Subramoniam 40 212 2013 10.1016/j.jclepro.2011.09.004 Subramoniam R, Huisingh D, Chinnam RB, Subramoniam S (2013) Remaufacturing decision-making Framwork: research validation using the analythical hierarchical process remanufacturing decision-making framework (RDMF) // remanufacturing decision-making framework (RDMF). Res Valid Using Analytical Hierarchical Process J Cleaner Product 40:212-220. https://doi.org/10.1016/j.jclepro.2011.09.004
Sundin E (2004) Product and process design for successful remanufacturing. Zugl.: Linköping, Univ., Diss., 2004. Linköping studies in science and technology dissertation, vol 906. Univ, Linköping
Calif Manag Rev MW Toffel 46 2 120 2004 10.2307/41166214 Toffel MW (2004) Strategic Management of Product Recovery. Calif Manag Rev 46(2):120-141. https://doi.org/10.2307/41166214
US2015093611A1
J Power Sources J Vetter 147 1-2 269 2005 10.1016/j.jpowsour.2005.01.006 Vetter J, Novák P, Wagner MR, Veit C, Möller KC, Besenhard JO, Winter M, Wohlfahrt-Mehrens M, Vogler C, Hammouche A (2005) Ageing mechanisms in lithium-ion batteries. J Power Sources 147(1-2):269-281. https://doi.org/10.1016/j.jpowsour.2005.01.006
10.1016/j.procir.2017.02.003 Wang H (2017) Selective disassembly planning for end of life product
WO2015016979A1
Proceed Inst Mech Eng, Part B: J Eng Manuf Z Zhou 18 4 095440541878997 2018 10.1177/0954405418789975 Zhou Z, Liu J, Pham DT et al (2018) Disassembly sequence planning: recent developments and future trends. Proceed Inst Mech Eng, Part B: J Eng Manuf 18(4):095440541878997. https://doi.org/10.1177/0954405418789975
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.