참고문헌 (29)

1. Lu, Yiping, Gao, Xuzhou, Jiang, Li, Chen, Zongning, Wang, Tongmin, Jie, Jinchuan, Kang, Huijun, Zhang, Yubo, Guo, Sheng, Ruan, Haihui, Zhao, Yonghao, Cao, Zhiqiang, Li, Tingju. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range. Acta materialia, vol.124, 143-150.

   상세보기

2. Zou, Yu, Wheeler, Jeffrey M., Ma, Huan, Okle, Philipp, Spolenak, Ralph. Nanocrystalline High-Entropy Alloys: A New Paradigm in High-Temperature Strength and Stability. Nano letters : a journal dedicated to nanoscience and nanotechnology, vol.17, no.3, 1569-1574.

   상세보기

3. Gludovatz, Bernd, Hohenwarter, Anton, Catoor, Dhiraj, Chang, Edwin H., George, Easo P., Ritchie, Robert O.. A fracture-resistant high-entropy alloy for cryogenic applications. Science, vol.345, no.6201, 1153-1158.

   상세보기

4. George, E.P., Curtin, W.A., Tasan, C.C.. High entropy alloys: A focused review of mechanical properties and deformation mechanisms. Acta materialia, vol.188, 435-474.

   상세보기

5. Li, Zhiming, Pradeep, Konda Gokuldoss, Deng, Yun, Raabe, Dierk, Tasan, Cemal Cem. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off. Nature, vol.534, no.7606, 227-230.

   상세보기

6. Miracle, D.B., Senkov, O.N.. A critical review of high entropy alloys and related concepts. Acta materialia, vol.122, 448-511.

   상세보기

7. Li, Ruidi, Niu, Pengda, Yuan, Tiechui, Cao, Peng, Chen, Chao, Zhou, Kechao. Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical property. Journal of alloys and compounds, vol.746, 125-134.

   상세보기

8. Zhang, Y., Zuo, T.T., Tang, Z., Gao, M.C., Dahmen, K.A., Liaw, P.K., Lu, Z.P.. Microstructures and properties of high-entropy alloys. Progress in materials science, vol.61, 1-93.

   상세보기

9. Ye, Y.F., Wang, Q., Lu, J., Liu, C.T., Yang, Y.. High-entropy alloy: challenges and prospects. Materials today, vol.19, no.6, 349-362.

   상세보기

10. Alshataif, Yaser A., Sivasankaran, S., Al-Mufadi, Fahad A., Alaboodi, Abdulaziz S., Ammar, Hany R.. Manufacturing Methods, Microstructural and Mechanical Properties Evolutions of High-Entropy Alloys: A Review. Metals and materials international, vol.26, no.8, 1099-1133.

    상세보기

11. Seifi, Mohsen, Salem, Ayman, Beuth, Jack, Harrysson, Ola, Lewandowski, John J.. Overview of Materials Qualification Needs for Metal Additive Manufacturing. JOM : the journal of the Minerals, Metals & Materials Society, vol.68, no.3, 747-764.

    상세보기

12. Kok, Y., Tan, X.P., Wang, P., Nai, M.L.S., Loh, N.H., Liu, E., Tor, S.B.. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review. Materials & Design, vol.139, 565-586.

    상세보기

13. Sutton, Austin T., Kriewall, Caitlin S., Leu, Ming C., Newkirk, Joseph W.. Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes. Virtual and physical prototyping, vol.12, no.1, 3-29.

    상세보기

14. Nguyen, Quy Bau, Nai, Mui Ling Sharon, Zhu, Zhiguang, Sun, Chen-Nan, Wei, Jun, Zhou, Wei. Characteristics of Inconel Powders for Powder-Bed Additive Manufacturing. Engineering : (beijing, china), vol.3, no.5, 695-700.

    상세보기

15. Mullis, A.M., Bigg, T.D., Adkins, N.J.. A microstructural investigation of gas atomized Raney type Al-27.5 at.% Ni catalyst precursor alloys. Journal of alloys and compounds, vol.648, 139-148.

    상세보기

16. Brif, Yevgeni, Thomas, Meurig, Todd, Iain. The use of high-entropy alloys in additive manufacturing. Scripta materialia, vol.99, 93-96.

    상세보기

17. Ocelík, V., Janssen, N., Smith, S. N., De Hosson, J. Th. M.. Additive Manufacturing of High-Entropy Alloys by Laser Processing. JOM : the journal of the Minerals, Metals & Materials Society, vol.68, no.7, 1810-1818.

    상세보기

18. Wang, Pan, Huang, Pengfei, Ng, Fern Lan, Sin, Wai Jack, Lu, Shenglu, Nai, Mui Ling Sharon, Dong, ZhiLi, Wei, Jun. Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder. Materials & Design, vol.168, 107576-.

    상세보기

19. Eißmann, Nadine, Klöden, Burghardt, Weißgärber, Thomas, Kieback, Bernd. High-entropy alloy CoCrFeMnNi produced by powder metallurgy. Powder metallurgy, vol.60, no.3, 184-197.

    상세보기

20. Methodology of powders measurement, Ostrava: Laboratory of Bulk Materials. VSB-TU Ostrava, 2014;27. 

21. International Standardization Organization ISO 4490:2014-Metallic Powders-Determination of flow rate by means of a calibrated funnel (Hall flowmeter). ISO 2014. 

22. Standard guide for characterizing properties of metal powders used for additive manufacturing processes ASTM-International ASTM F3049-14 2014 

23. Measuring powder flowability: a comparison of test methods. Part II. Powder and bulk engineering Schulze D. 1996 

24. Chem Eng Carr RL. 69 1 1965 

25. Chemical engineer’s handbook Raymus GJ. 1985 6 

26. Özbilen, S.. Satellite formation mechanism in gas atomised powders. Powder metallurgy, vol.42, no.1, 70-78.

    상세보기

27. Conlon, K. T., Maire, E., Wilkinson, D. S., Henein, H.. Processing and microstructural characterization of Al-Cu alloys produced from rapidly solidified powders. Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol.31, no.1, 249-260.

    상세보기

28. Chen, Z., Lei, Y., Zhang, H.. Structure and properties of nanostructured A357 alloy produced by melt spinning compared with direct chill ingot. Journal of alloys and compounds, vol.509, no.27, 7473-7477.

    상세보기

29. Leung, Chu Lun Alex, Marussi, Sebastian, Towrie, Michael, Atwood, Robert C., Withers, Philip J., Lee, Peter D.. The effect of powder oxidation on defect formation in laser additive manufacturing. Acta materialia, vol.166, 294-305.

    상세보기

활용도 Top5 논문

더보기

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.