최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기대한금속 . 재료학회지 = Korean journal of metals and materials, v.59 no.6, 2021년, pp.384 - 391
Shon, In-Jin
Tungsten carbides are very attractive because of their superior properties, e.g., high thermal and electrical conductivities, high melting point, high hardness, and relatively high chemical stability. Tungsten carbides with a binder metal, for example Ni or Co, are mainly used to fabricate nozzles, ...
Imasato, Shuichi, Tokumoto, Kei, Kitada, Tetsunori, Sakaguchi, Shigeya. Properties of ultra-fine grain binderless cemented carbide ‘RCCFN’. International journal of refractory metals & hard materials, vol.13, no.5, 305-312.
Gille, Gerhard, Bredthauer, J, Gries, B, Mende, B, Heinrich, W. Advanced and new grades of WC and binder powder – their properties and application. International journal of refractory metals & hard materials, vol.18, no.2, 87-102.
Lin, H., Tao, B., Xiong, J., Li, Q.. Using a cobalt activator to synthesize titanium carbide (TiC) nanopowders. International journal of refractory metals & hard materials, vol.41, 363-365.
Geim, A. K., Novoselov, K. S.. The rise of graphene. Nature materials, vol.6, no.3, 183-191.
Lee, Changgu, Wei, Xiaoding, Kysar, Jeffrey W., Hone, James. Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene. Science, vol.321, no.5887, 385-388.
Balandin, Alexander A., Ghosh, Suchismita, Bao, Wenzhong, Calizo, Irene, Teweldebrhan, Desalegne, Miao, Feng, Lau, Chun Ning. Superior Thermal Conductivity of Single-Layer Graphene. Nano letters : a journal dedicated to nanoscience and nanotechnology, vol.8, no.3, 902-907.
Kim, Seong-Eun, Yoon, Jin-Kook, Shon, In-Jin. Rapid Sintering of Nanostructured WC-Graphene Composites and Their Mechanical Properties. Journal of nanoscience and nanotechnology, vol.20, no.7, 4436-4439.
Shon, In-Jin, Yoon, Jin-Kook, Hong, Kyung-Tae. Enhanced properties of nanostructured TiO2-graphene composites by rapid sintering. Metals and materials international, vol.24, no.1, 130-135.
Norgren, S., Garcia, J., Blomqvist, A., Yin, L.. Trends in the P/M hard metal industry. International journal of refractory metals & hard materials, vol.48, 31-45.
Zhang, Z.G., Gesmundo, F., Hou, P.Y., Niu, Y.. Criteria for the formation of protective Al2O3 scales on Fe–Al and Fe–Cr–Al alloys. Corrosion science, vol.48, no.3, 741-765.
Niihara 1990
Kim, Seong-Eun, Shon, In-Jin. Rapid Sintering and Synthesis of Nanocrystalline Ta-ZrO2 Composite. 대한금속 . 재료학회지 = Korean journal of metals and materials, vol.58, no.11, 776-781.
Berger, S., Porat, R., Rosen, R.. Nanocrystalline materials: A study of WC-based hard metals. Progress in materials science, vol.42, no.1, 311-320.
Kang, Bo-Ram, Yoon, Jin-kook, Hong, Kyung-Tae, Shon, In-Jin. Mechanical properties and rapid low-temperature consolidation of nanocrystalline Cu-ZrO2 composites by pulsed current activated heating. Metals and materials international, vol.21, no.4, 698-703.
Shon, In-Jin, Kang, Bo-Ram. 펄스전류활성 가열에 의한 나노구조의 4Cr-3ZrO2 복합재료 급속소결과 특성. 대한금속 . 재료학회지 = Korean journal of metals and materials, vol.53, no.5, 320-325.
Shen, Zhijian, Johnsson, Mats, Zhao, Zhe, Nygren, Mats. Spark Plasma Sintering of Alumina. Journal of the American Ceramic Society, vol.85, no.8, 1921-1927.
Garay, Javier E., Glade, Stephen C., Anselmi-Tamburini, Umberto, Asoka-Kumar, Palakkal, Munir, Zuhair A.. Electric current enhanced defect mobility in Ni3Ti intermetallics. Applied physics letters, vol.85, no.4, 573-575.
Gu, Y., Shen, P., Yang, N.N., Cao, K.Z.. Effects of direct current on the wetting behavior and interfacial morphology between molten Sn and Cu substrate. Journal of alloys and compounds, vol.586, 80-86.
Shon, In-Jin. Study on Pulsed Current Activated Sintering. 대한금속 . 재료학회지 = Korean journal of metals and materials, vol.52, no.8, 573-580.
Suryanarayana 1998
Niihara, K., Morena, R., Hasselman, D. P. H.. Evaluation ofK Ic of brittle solids by the indentation method with low crack-to-indent ratios. Journal of materials science letters, vol.1, no.1, 13-16.
Upadhyaya, G.S. Materials science of cemented carbides — an overview. Materials & design, vol.22, no.6, 483-489.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.