참고문헌 (34)

1. IEEE Sensors. Muthuramalingam 18 736 2018 10.1109/JSEN.2017.2777880 Sensor integration based approach for automatic fork lift trucks 

   상세보기

2. IEEE Sensors. Rabik 18 732 2018 10.1109/JSEN.2017.2772316 Tracking and locking system for shooter with sensory noise cancellation 

   상세보기

3. Human Factors and Ergonomics Society. Suh 61 2018 On-Road Evaluation of In-vehicle Interface Characteristics and Their Effects on Performance of Visual Detection on the Road and Manual Entry 

4. IEEE Sensors. Khan 15 3164 2015 10.1109/JSEN.2014.2375203 Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review 

   상세보기

5. Phys. Status. Solidi. A. Leenen 206 588 2009 10.1002/pssa.200824428 Printable electronics: Flexibility for the future 

   상세보기

6. J. Microelectron. Electron. Packag. Dobie 16 103 2019 10.4071/imaps.788036 Flexible PET Substrate for High-Definition Printing of Polymer Thick-Film Conductive Pastes 

   상세보기

7. Venkata Krishna Rao 2015 Conductive silver inks and their applications in printed and flexible electronics 

8. Micromachines Rivadeneyra 2020 367 2020 10.3390/mi11040367 Recent Advances in Printed Capacitive Sensors 

   상세보기

9. Sensors Ji 14 22431 2014 10.3390/s141222431 Measurement of Gas-Liquid Two-Phase Flow in Micro-Pipes by a Capacitance Sensor 

   상세보기

10. Walker 2018 A review of technologies for sensing contact location on the surface of a display Society for Information Display 

11. International Journal of Engineering Research & Technology (IJERT) Sharma 5 2017 A Review Paper on Touch Screen 

12. Hlee 8 1998 Tactile sensing for mechatronics-a state of the art survey 

13. Chen 2012 

14. Elsevier Billinghurst 53 71 2015 Computers in Human Behavior 

15. Sensors Lee 18 3637 2015 10.3390/s18113637 Mutual Capacitive Sensing Touch Screen Controller for Ultrathin Display with Extended Signal Passband Using Negative Capacitance 

    상세보기

16. Liu 2016 On-chip touch sensor readout circuit using passive sigma-delta modulator capacitance-to-digital converter 

17. Bakkenes 2019 Android Automotive Transforms Vehicle Infotainment 

18. Saxena 2018 Everything You Need to Know About In-Vehicle Infotainment Systems. Automotive, Article. eInfochips 

19. IEEE Transactions on Electronics Packaging Manufacturing Yim 30 306 2007 10.1109/TEPM.2007.906496 Effect of Conductive Particle Properties on the Reliability of Anisotropic Conductive Film for Chip-on-Glass Applications 

    상세보기

20. Cruz 2017 10.1016/j.displa.2017.02.003 Analysis of the bonding process and materials optimization for mitigating the Yellow Border defect on optically bonded automotive display panels. Displays 

    상세보기

21. Blake 2010 Careful selection of optimal coatings and substrates can result in greatly enhanced display performance 

22. Journal of Micromechanics and Microengineering Lee 26 2016 10.1088/0960-1317/26/11/115008 Roll-type photolithography for continuous fabrication of narrow bus wires 

    상세보기

23. The International Journal of Advanced Manufacturing Technology Gong 108 749 2020 10.1007/s00170-020-05377-9 Deformation characteristics and resistance distribution in thermoforming of printed electrical circuits for in-mold electronics application 

    상세보기

24. Goldsberry 2020 In-Mold Electronics Market Will Exceed $1.11 Billion by 2029 

25. Das 2019 In Mold Electronics Market 

26. Weindorf 2015 Touch Sensor Transparent Conductor Optical Comparison 

27. Tseng 2012 10.1002/j.2168-0159.2012.tb05715.x Transparent Silver Nanowire Film as Pixel Electrode for Flexible Electrophoretic Display 

    상세보기

28. Bhat 2015 Curved Mobile Phone Cover with Carbon NanoBud TouchSID DIGEST 

29. Advances in Optical Thin Films. Puetz 5963 59631E 2005 10.1117/12.625208 Gravure Printing of Transparent Conducting ITO Coatings for Display Applications 

    

30. Macdonald 2015 10.1002/9783527679973.ch10 Latest Advances in Substrates for Flexible Electronics 

    

31. Advances in Science and Technology Karabey 11 139 2017 An Experimental Study on Wall Thickness Distribution in Thermoforming 

32. Chang 2011 Numerical and experimental investigation of polycarbonate vacuum-forming process 

33. Ngo 2018 10.1016/j.compositesb.2018.02.012 Additive manufacturing (3D printing): A review of materials, methods, applications and challenges 

    상세보기

34. Qin 2017 10.1115/1.4034663 Direct Printing of Capacitive Touch Sensors on Flexible Substrates by Additive E-Jet Printing With Silver Nanoinks 

    상세보기