[논문]Design of the High-Speed PMSG with Two Different Shaft Material Considering Overhang Effect and Mechanical Characteristics

Lee, Jeong-In; Bang, Tae-Kyoung; Lee, Hoon-Ki; Woo, Jong-Hyeon; Nah, Junghyo; Choi, Jang-Young

doi:10.3390/app11167670

[해외논문] Design of the High-Speed PMSG with Two Different Shaft Material Considering Overhang Effect and Mechanical Characteristics 원문보기

Applied sciences, v.11 no.16, 2021년, pp.7670 -

Lee, Jeong-In (Department of Electrical Engineering, Chungnam National University, Daejeon 34134, Korea) , Bang, Tae-Kyoung (Department of Electrical Engineering, Chungnam National University, Daejeon 34134, Korea) , Lee, Hoon-Ki (Department of Electrical Engineering, Chungnam National University, Daejeon 34134, Korea) , Woo, Jong-Hyeon (Department of Electrical Engineering, Chungnam National University, Daejeon 34134, Korea) , Nah, Junghyo (Department of Electrical Engineering, Chungnam National University, Daejeon 34134, Korea) , Choi, Jang-Young (Department of Electrical Engineering, Chungnam National University, Daejeon 34134, Korea)

Abstract ▼ AI-Helper

In general, high-speed machines should be designed to satisfy electromagnetic and mechanical characteristics. In this study, the design of high-speed permanent magnet synchronous generator with two different shaft materials considering overhang effect and mechanical characteristics was performed. It was confirmed that the leakage magnetic flux generated by the two shaft materials electromagnetically affects the high-speed generator. Additionally, it is important to accurately predict the natural frequency mode and critical speed to prevent damage and vibration of the rotating body owing to scattering during high-speed rotation. Therefore, the mechanical characteristics of the designed model were analyzed. In this study, we propose a design method that considers both the electromagnetic effects and mechanical characteristics. Subsequently, verification was performed through experiments and comparisons for the validity and reliability of the proposed design method.

참고문헌 (21)

Qiu Analysis of the super high-speed permanent magnet generator under unbalanced load condition IET Electro. Power Appl. 2017 10.1049/iet-epa.2016.0669 11 1492

상세보기
Zhang Power Loss and Thermal Analysis of a MW High-Speed Permanent Magnet Synchronous Machine IEEE Trans. Energy Convers. 2017 10.1109/TEC.2017.2710159 32 1468

상세보기
Zhao A Highly Efficient 200,000 RPM Permanent Magnet Motor System IEEE Trans. Magn. 2007 10.1109/TMAG.2007.893523 43 2528

상세보기
Paulides An Evaluation of Alternative Stator Lamination Materials for a High-Speed, 1.5 MW Permanent Magnet Generator IEEE Trans. Magn. 2004 10.1109/TMAG.2004.832172 40 2041

상세보기
Ede Rotor Resonances of High-Speed Permanent-Magnet Brushless Machines IEEE Trans. Ind. Appl. 2002 10.1109/TIA.2002.804765 38 1542

상세보기
Hong Investigations on a Super High Speed Motor-Generator for Microturbine Applications Using Amorphous Core IEEE Trans. Magn. 2013 10.1109/TMAG.2013.2239276 49 4072

상세보기
Liu A Loss Separation Method of a High-Speed Magnetic Levitated PMSM Based on Drag System Experiment Without Torque Meter IEEE Trans. Ind. Electron. 2019 10.1109/TIE.2018.2844795 66 2976

상세보기
Shin Design and Analysis of High-Speed Permanent Magnet Synchronous Generator with Rotor Structure Considering Electromechanical Characteristics IEEE Trans. Appl. Supercond. 2020 30 1

상세보기
Du Parameter Design for a High-Speed Permanent Magnet Machine under Multiphysics Constraints IEEE Trans. Energy Convers. 2020 10.1109/TEC.2020.3000054 35 1

상세보기
Gerada High-Speed Electrical Machines: Technologies, Trends, and Developments IEEE Trans. Ind. Electron. 2014 10.1109/TIE.2013.2286777 61 2946

상세보기
Zhu Instantaneous magnetic field distribution in brushless permanent magnet DC motors. I. Open-circuit field IEEE Trans. Magn. 1993 10.1109/20.195557 29 124

상세보기
Jang Electromechanical parameters calculation of permanent magnet synchronous motor susing the transfer relations theorem IEEE Trans. Magn. 2007 10.1109/TMAG.2007.893803 43 2495

상세보기
Jang Design and Characteristic Analysis of a High-Speed Permanent Magnet Synchronous Motor Considering the Mechanical Structure for High-Speed and High-Head Centrifugal Pumps IEEE Trans. Magn. 2018 10.1109/TMAG.2018.2845874 11 1

상세보기
Ou Experimental Characterization and Feasibility Study on High Mechanical Strength Electrical Steels for High-Speed Motors Application IEEE Trans. Ind. Appl. 2021 10.1109/TIA.2020.3033262 57 284

상세보기
Ahn Rotor Design of High-Speed Permanent Magnet Synchronous Motors Considering Rotor Magnet and Sleeve Materials IEEE Trans. Appl. Supercond. 2018 28 1

상세보기
Zhang Rotor Retaining Sleeve Design for a 1.12-MW High-Speed PM Machine IEEE Trans. Ind. Appl. 2015 10.1109/TIA.2015.2423659 51 3675

상세보기
Zhang Design Consideration for the Tooth Shoe Shape for High-Speed Permanent Magnet Generators IEEE Trans. Magn. 2015 51 1
Huang Multiphysics Design and Optimization of High-Speed Permanent-Magnet Electrical Machines for Air-Blower Applications IEEE Trans. Ind. Electron. 2016 10.1109/TIE.2016.2518121 63 2766

상세보기
Fang Rotor Design for High-Speed High-Power Permanent Magnet Synchronous Machines IEEE Trans. Ind. Appl. 2017 10.1109/TIA.2017.2684090 53 3411

상세보기
Budynas, R.G. (1998). Advanced Strength and Applied Stress Analysis, McGraw-Hill Science.
Shin Analytical Modeling and Experimental Verification for Electromagnetic Analysis of Tubular Linear Synchronous Machines With Axially Magnetized Permanent Magnets and Flux-Passing Iron Poles IEEE Trans. Magn. 2018 54 1

상세보기

LOADING...

활용도 분석정보

상세보기

다운로드

내보내기

활용도 Top5 논문

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.

원문 보기

AccessON 원문보기

원문 URL 링크

DOI : 10.3390/app11167670 [무료]
Molecular Diversity Preservation International : 저널
AccessON : 저널

*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

저작권 관리 안내

내보내기 메뉴

내보내기 구분

파일저장
인쇄
메일전송

구성항목

기본정보
상세정보

관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관

저장형식

Text(ASCII format)
Excel format
RefWorks Direct Export
RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley

메일정보

받는사람 (필수): @
보내는사람 (선택): @
제목
내용: KISTI 검색결과 이메일 서비스

안내

총 건의 자료가 검색되었습니다.

다운받으실 자료의 인덱스를 입력하세요. (1-10,000)

검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다.

데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요)

다운로드 파일은 UTF-8 형태로 저장됩니다.
파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오.

Text(ASCII format)
Excel format

표제어: PCR

동의어: Packet Collision Rate

용어 설명 출처 목록 (6)

용어 설명: PCR은 세균 특이성이 있는 primer를 이용하여 적은 수의 세균이 있을지라도 쉽게 검출할 수 있는 유용한 방법이며, 이를 이용하여 구강 내 치면세균막이나 타액에서 직접 세균을 검출할 수 있게 되었다[8].

AI-Helper ※ AI-Helper는 을 사용합니다.

AI-Helper

안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

연합인증