최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기IEEE access : practical research, open solutions, v.9, 2021년, pp.109407 - 109412
Chang, Junjie (Nanchang Hangkong University, Key Laboratory of Nondestructive Testing, Ministry of Education, Nanchang, China) , Wang, Congcong (Nanchang Hangkong University, Key Laboratory of Nondestructive Testing, Ministry of Education, Nanchang, China) , Li, Wenchao (Nanchang Hangkong University, Key Laboratory of Nondestructive Testing, Ministry of Education, Nanchang, China) , Tang, Yuan (Chongqing University of Posts and Telecommunications, College of Optoelectronic Engineering, Chongqing, China) , Chen, Zhiheng (Nanchang Hangkong University, Key Laboratory of Nondestructive Testing, Ministry of Education, Nanchang, China)
The viscoelasticity of composite materials is one of the important mechanical properties to characterize the intrinsic damping mechanism, which is a crucial evaluation index for the safety performance of materials. In this paper, an approach to viscoelastic evaluation is proposed by the non-contact ...
Zhu, Wujun, Xiang, Yanxun, Liu, Chang-Jun, Deng, Mingxi, Xuan, Fu-Zhen. A feasibility study on fatigue damage evaluation using nonlinear Lamb waves with group-velocity mismatching. Ultrasonics, vol.90, 18-22.
Gholizadeh, S.. A review of non-destructive testing methods of composite materials. Procedia structural integrity, vol.1, 50-57.
Schapery, R.A.. Stress Analysis of Viscoelastic Composite Materials. Journal of composite materials, vol.1, no.3, 228-267.
Yates, B., McCalla, B. A., Phillips, L. N., Kingston-Lee, D. M., Rogers, K. F.. The thermal expansion of carbon fibre-reinforced plastics : Part 5 The influence of matrix curing characteristics. Journal of materials science, vol.14, no.5, 1207-1217.
Hodges, J., Yates, B., Darby, M. I., Wostenholm, G. H., Clemmet, J. F., Keates, T. F.. Residual stresses and the optimum cure cycle for an epoxy resin. Journal of materials science, vol.24, no.6, 1984-1990.
Jalocha, D., Constantinescu, A., Neviere, R.. Prestrained biaxial DMA investigation of viscoelastic nonlinearities in highly filled elastomers. Polymer testing, vol.42, 37-44.
Nondestruct Test Principle and application research of non-contact air-coupled ultrasonic detection chang 2013 31 6
J Mater Eng Research of the relationship between pore morphology and ultrasonic attenuation coefficient in CFRP gao 2012 2 59
Chinese Journal of Mechanical Engineering Effects on ultrasonic scattering attenuation coefficient of morphological characteristics of voids in composite materials zhang 2010 21 1735
Kažys, R., Demčenko, A., Žukauskas, E., Mažeika, L.. Air-coupled ultrasonic investigation of multi-layered composite materials. Ultrasonics, vol.44, no.suppl, e819-e822.
Rusu, G., Rusu, E.. Anionic Nylon 6/Zinc Composite Materials: Evaluation of Thermal and Mechanical Behavior. International journal of polymer analysis and characterization, vol.15, no.8, 509-523.
Open Eng Innovative soft magnetic composite materials: Evaluation of magnetic and mechanical properties poškovi? 2018 10.1515/eng-2018-0047 8 368
Nondestruct Test Discussion on the influence of scanning direction of composite material on the results of water-jet ultrasonic C-scan gao 2020 44 13
Gunasekaran, Sundaram, Ak, M.Mehmet. Dynamic oscillatory shear testing of foods — selected applications. Trends in food science & technology, vol.11, no.3, 115-127.
J Compos Mater Ultrasonic attenuation model of porosity of CFRP/epoxy composites of different thickness li 2020 31 877
Battery Bimonthly Application of air-coupled ultrasonic technology in Li-on battery defect detection chang 2017 47 315
ZENG Xiang, 曾 祥, YANG Chen-long, 杨辰龙, ZHOU Xiao-jun, 周晓军, TENG Guo-yang, 滕国阳. Ultrasonic detection of rich-resin in low-porosity CFRP. 光學精密工程 = Optics and Precision Engineering, vol.26, no.11, 2732-2743.
Acta Materiae Compositae Sinica Advanced composite materials and aerospace du 2006 12 1
Aköz, Ahmet Yalçın, Kadıoğlu, Fethi, Tekin, Gülçin. Quasi-static and dynamic analysis of viscoelastic plates. Mechanics of time-dependent materials, vol.19, no.4, 483-503.
van Ruymbeke, Evelyne, Keunings, Roland, Bailly, Christian. Determination of the molecular weight distribution of entangled linear polymers from linear viscoelasticity data. Journal of non-Newtonian fluid mechanics, vol.105, no.2, 153-175.
Imiela, M., Anyszka, R., Bieliński, D. M., Pędzich, Z., Zarzecka-Napierała, M., Szumera, M.. Effect of carbon fibers on thermal properties and mechanical strength of ceramizable composites based on silicone rubber. Journal of thermal analysis and calorimetry, vol.124, no.1, 197-203.
Santos, Mário, Santos, Jaime, Reis, Paulo, Amaro, Ana. Ultrasonic C-scan techniques for the evaluation of impact damage in CFRP. Materials testing : materials and components, technology and application, vol.63, no.2, 131-137.
Lubrication Eng Evaluation of rubber friction materials viscoelasticity by ultrasonic wave method chang 2007 31 55
Valvano, Stefano, Alaimo, Andrea, Orlando, Calogero. Sound Transmission Analysis of Viscoelastic Composite Multilayered Shells Structures. Aerospace, vol.6, no.6, 69-.
Valvano, S., Alaimo, A., Orlando, C.. Analytical analysis of sound transmission in passive damped multilayered shells. Composite structures, vol.253, 112742-.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.